brine tank Equipment in Germany

15 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Model Combi Universal - Heat Pump for Heating and Hot Water

by Ochsner heat pumps     based in Haag, GERMANY

Unique for the individual, optimised combination of all heat sources (air, brine, geothermal heat direct, water), all function and all configurations, Easy transport, easy assambly, space saving, Heating system, Hot water, The honest monovalent system - without a heat rod for geothermal heat, Hot-water tank (ECO 110 litres) in stainless steel, ...

Caustic Soda

by Akzo Nobel Base Chemicals (ANBC)     Office in Ibbenbüren, GERMANY

Caustic Soda Lye is one of the most widely used chemicals in the industry. Caustic soda is a solution of Sodium hydroxide (NaOH) in water. It is a strong base with a wide range of applications in different industries. We produce caustic soda together with chlorine and hydrogen from the electrolysis of salt brine. With our production in five plants ...

Leakwise - Model ID-221 - Oil Sheen Sensor

by GE Analytical Instruments     Office in GERMANY

The Leakwise ID-221 Sensor, which is used with a Leakwise controller, is installed in sumps and groundwater monitoring wells to detect floating oil sheens resulting from oil leaks in underground storage tanks and pipelines.

Aquadron - Model FXL - Cold and Warm Water Systems

by INNOWATECH GmbH     based in Empfingen, GERMANY

Compac station for clean up and germ prevention.  The station produces the pH neutral disinfectant Anolyte on site.  The dimensioning of the INNOWATECH Aquadron  FXL systems is affected by applications and the existing local conditions. This type of systems is ...

CHLORINSITU - Model III - Compact Electrolysis System

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Output of 25 – 50 g sodium hypochlorite per hour. Generation of sodium hypochlorite in smaller amounts for smaller swimming pools: Electrolysis system CHLORINSITU III Compact.

CHLORINSITU - Model IV - Compact Electrolysis System

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Output of 25 – 50 g ultra-pure active chlorine per hour. Generate ultra-pure chlorine gas using the vacuum method with electrolysis system CHLORINSITU IV Compact. Cost-effective, robust and compact

CHLORINSITU - Model III - Electrolysis System

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Output of 100 – 10,000 g sodium hypochlorite per hour. Need sodium hypochlorite that is high-purity or low-chloride and low-chlorate? The electrolysis system CHLORINSITU III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling towers.

Aquadron - Model FXM / FX - Cold and Warm Water Systems

by INNOWATECH GmbH     based in Empfingen, GERMANY

Compact equipment to clean up and germ prevention. The equipment produces the pH neutral active agent on site.  The dimensioning of the Aquadron FXM systems is affected by the applications and  objects. This type of system is used to treat predominantly drinking water (cold and warm water systems).

Dulco Lyse - Electrolysis System

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Output of 100 – 300 g ultra-pure hypochlorous acid per hour. Efficient production of DulcoLyt 400 (ECA water) with an exceptionally low chloride and chlorate content. Maximum protection against corrosion and very good cost efficiency because of low chloride.

CHLORINSITU - Model V - Electrolysis System

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Output of 100 – 3,500 g ultra-pure active chlorine per hour. Generate ultra-pure active chlorine using the vacuum method with electrolysis system CHLORINSITU V. Suited to applications for metering hypochlorous acid and simultaneously correcting the pH value.

Model MDI - Methylenediphenyl Diisocyanate

by Chematur Engineering AB     Office in Bad Homburg, GERMANY

MDI is produced from Benzene by nitration to Nitrobenzene (NB) followed by hydrogenation of NB to produce Aniline (AN). The Aniline is condensed with formaldehyde to produce a diamine, MDA (Methylene diphenyl diamine). MDA is finally phosgenated to produce the end product, MDI. The crude MDI consists of several different isomers and oligomers ...

CHLORINSITU - Model V Plus - Electrolysis System

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

Capacity 100 – 3,500 g of ultra-pure active chlorine per hour. Generation of active chlorine in combination with a sodium hypochlorite solution using the vacuum process with the electrolysis system CHLORINSITU V Plus. Chlorination and pH value adjustment from a single system

Leakwise - Model ID-223 - Oil Sheen Sensor

by GE Analytical Instruments     Office in GERMANY

A Leakwise system consists of a controller and one or more sensors (also called detectors). The ID-223 sensor has a high frequency transmitter antenna mounted on a float built in a guiding cage. The floating sensor maintains its position precisely at the liquid/air interface, despite fluctuations in the liquid level.

Desalination Plants

by WME GmbH     based in Dranske, GERMANY

WME today is producing and selling desalination plants in the order of magnitude of a potable water production of about 20 m3/h. To run this plant a power of about 300 kW is necessary. Therefore the highlight of the WME plants is the winddriven saltwater desalination plant. But dependent of the price for the kilowatt hour the WME-plant can also be ...

APEX - Hose Pump

by Watson-Marlow Fluid Technology Group     Office in GERMANY

The newly expanded range of APEX hose pumps is ideal for aggressive and abrasive applications up to 116psi. With their seal-less, valve-less design, APEX pumps are engineered for a more competitive price/performance ratio vs high pressure hose pumps.

Need help finding the right suppliers?

Let the XPRTs do the work for you