Only show results available in Virginia? Ok

briquette press equipment

  • Premium

    Specac - Model Atlas Series - Evacuable Pellet Dies

    Specac manufactures a wide range of high-quality Atlas Series Evacuable Pellet Dies suitable compacting powdered samples into discs or briquettes. These are particularly well suited for the preparation of solid KBr pellets for FTIR molecular spectroscopic analysis and XRF pellets for X-Ray Fluorescence atomic spectroscopic analysis (as required by ...

    By Specac Limited based in Orpington, UNITED KINGDOM. from Evacuable Pellet Dies Product line

  • BRIK - Model MB100 - Mechanical Briquetting Presses

    The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

    By DIPIU srl based in Breganze (VI), ITALY. from Mechanical Briquetting Presses Product line

  • Metso EtaScrewPress - Double Screw Press

    The Metso EtaScrewPress has been developed to process shredder light fraction. The material is fed into the double screw press using a dozing bunker and conveyer belt. The products are compacted briquettes of various diameters.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY. from Double Screw Press Product line

  • Model DH500-28 X 27 X 2 - Briquetting Press

    (6) Briquetting Press, Model Dh500-28 X 27 X 2, Twin Roll Briquetter, Each Roll Measures 28' Dia. X 27' Face, Driven By 350 Hp, 460 Volt, 1750 Rpm Main Motor With Foote-Jones Vari-Speed Reducer. Includes Hyraulic Pump & Lube System & Controls. Rated For Approximately 50 Tph. Pockets Measure 1.8' X 1.7' X 1.3' Deep. New In 1997 And Reported ...

    By Machinery & Equipment Company, Inc. based in San Francisco, CALIFORNIA (USA). from Briquetting Press Product line

  • C. F. Nielsen - Consumer Briquetting Plant 900 - 1400 kg/h

    Briquetting Plant for production of 900 - 1400 kg/hour of Consumer Briquettes from Softwood or Hardwood waste... We recommend a single line with a BP 5500 HD or a BP 6500 HD briquetting press with a 6-10 m3 dosing silo or in combination with a large silo including automatic discharge system.

    By C. F. Nielsen A/S based in Baelum, DENMARK. from Consumer Briquetting Plant 900 - 1400 kg/h Product line

  • Lehra - Model LBP90 - Briquette Press

    LBP 90/ 100 : Model are the best & economical as It has Jumbo production capacity with minimum operation cost as compare to above models. Some latest modifications make it more economical and most effective model. Briquettes produced from this press is 90 mm. & 100mm resp. This press does not require powder making units( Hammer Mill) and ...

    By Lehra Fuel-Tech Pvt. Ltd. based in Ludhiana, INDIA.

  • Model BP-400/BP-800 - Hydraulic Briquette Presses

    Biomass Briquette Systems BP-400 is a single 3' diameter hydraulic briquette press. The BP-400 comes complete as shown in the picture to the left, with the main control panel and cooling fan. A PLC controls the operation of the machine, starting with the speed and timing of the feed augers. The hydraulic pack uses one (1) 20-HP motor. Being able ...

    By Biomass Briquette Systems based in Chico, CALIFORNIA (USA). from Hydraulic Briquette Presses Product line

  • C. F. Nielsen - Model BP 2000 - Automatic Smallest Mechanical Briquette Press

    BP 2000 is our smallest mechanical briquette press for woodworking companies with less than 1000 tons of raw material per year. It is designed for production of briquettes from dust like MDF, waste like shavings or chips from softwood and other biomass products. Standard equipment for the BP 2000 is the functional BBCS, Basic Briquetting Control ...

    By C. F. Nielsen A/S based in Baelum, DENMARK. from Automatic Smallest Mechanical Briquette Press Product line

  • DIPIU - Model BRIK MB50 - Mechanical Briquetting Presses

    The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives. The material to be briquetted must be cellulosic and dry (having a moisture content between 10 and 14%). The hourly ...

    By DIPIU srl based in Breganze (VI), ITALY. from Mechanical Briquetting Presses Product line

  • DIPIU - Model BRIK MB90 - Mechanical Briquetting Presses

    The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

    By DIPIU srl based in Breganze (VI), ITALY. from Mechanical Briquetting Presses Product line

  • CFN - Model BP 6500 HD with ABCS - Briquetting Press

    The mechanical briquetting press BP 6500 HD is equipped with ABCS (Advanced Briquetting Control System) and touch screen operation system. It is mainly suitable for professional briquetting plants producing consumer briquettes. The BP 6500 HD is a very strong press with Reinforced bearing system and Advanced Briquetting Control System that allows ...

    By RENEW Energy Systems based in St. Ansgar, IOWA (USA). from Briquetting Press Product line

  • C. F. Nielsen - Wood Waste Briquetting Planing Plant - 2800 kg/h Capacity

    This case shows a 3-shift briquetting plant installed in a major Swedish planing factory to deal with the wood waste as it occurs. The briquetting line has a capacity of 2800 kg/h of softwood briquettes from the available production waste. It includes two BP 5500 briquette presses placed under a deck in the lower part of a large storage silo.

  • Biomass Briquetting Press

    We supply piston/ram type biomass briquetting equipments from India. Our machines are mechanical ram or piston type presses with high prodcution capacity from 600 to 1600 Kg per hour with 60mm to 90mm diameter solid cylindrical briquette logs.Rawmaterial can be any type of agricultural wastes, wood wastes and forestry wastes. Our machines are ...

    By BL GLOBAL based in Rajkot, INDIA.

  • CFN - Model BP 6000 automatic & BP 6000HD - Briquetting Press

    The BP 6000 HD mechanical briquetting press is for the professional manufacturer with a large demand for production of mainly consumer briquettes. It is a sturdy and reliable press available in two versions with difference only in the electronic control system.

    By RENEW Energy Systems based in St. Ansgar, IOWA (USA). from Briquetting Press Product line

  • Schuko - Briquetting Presses

    Save space and money by reduction your waste volume. The briquette presses by Schuko can make a substantial contribution to reducing the amount of space required to collect dust and shavings. Wood shavings briquettes require a minimum of storage space and have an excellent thermal value.

    By Schuko H. Schulte-Südhoff GmbH based in Bad Laer, GERMANY. from Briquetting Presses Product line

  • Compact Briquetting Presses

    Craft enterprises and industrial operations produce wood chips, shavings and saw dust on a daily basis that take up considerable space to store and transport. By contrast, briquettes save space and are easier to transport, and unlike loose materials, present a far lower risk of spontaneous combustion. Briquetting presses from VOTECS process these ...

    By Votecs Shredding - Briquetting Systems based in Ilsfeld, GERMANY.

  • Model OL.D 52 - Compact Briquetting Presses

    The material to be pressed is loaded into the mini silo. It is fed into the press by a cone-shaped auger, which introduces the material directly into the mechanical compacting chamber. A piston then presses the material through the extruder, which is held tight by the piston clamp. Thanks to the friction generated by the pressure of the piston ...

    By Costruzioni Nazzareno Srl based in Breda di Piave (TV), ITALY. from Compact Briquetting Presses Product line

  • Model HD 500 - Briquette Press

    Briquette presses of the HD (High Density)-Series are specifically designed for compacting problematic materials such as MDF-dust wood chips and metal swarf. An extremely high pressure is generated in a closed chamber which leads to briquettes with a high density – without any additives. Not only circular briquettes with a diameter of 50 mm ...

    By WEIMA based in Ilsfeld, GERMANY. from Briquette Press Product line

  • Small Units

    Small units for production of briquettes or granules using micro compactors or lab presses have also been designed and enable to obtain a briquettes or granules output of 50 kg/hour. SAHUT-CONREUR provides compact and complete turnkey systems (including electrical interlocking and interfacing control) integrating other equipment as screen or ...

    By Sahut-Conreur based in Raismes, FRANCE. from Small Units Product line

  • CFN - Model BS 350 - Automatic Briquette Cutter

    Briquette Cutter BS 350 has been manufactured as complementary equipment for our briquetting presses in order to enable us to offer our customers a complete solution regarding our briquetting press system.

    By RENEW Energy Systems based in St. Ansgar, IOWA (USA). from Automatic Briquette Cutter Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you