bubble diffuser Equipment

312 Results found
Only show results in Virginia?
OK
  • Keyword: bubble diffuser ×

AEROSTRIP - Ultra Fine Bubble Diffusers

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

AEROSTRIP fine bubble diffusers have the highest proven energy-efficiency and longest documented service life in the world.  Our advanced perforation technology, our use of a high strength polyurethane membrane, and our diffuser design allowing for high bottom coverage are the secrets to our high performance.  Ovivo can guarantee clean ...

Fine Bubble Membrane Diffuser

by Hydria Water AB     based in Borås, SWEDEN

FlexDisc and RexFlex diffusers cover various ranges and are high efficient disc diffusers with EPDM-membranes.

AQUATUBE - Model 90 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

Aerate the waste water with the AQUATUBE 90. The AQUATUBE fine bubble air diffuser is cylindrical in shape and is covered with an EPDM membrane with evenly distributed micro-slots. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants. It works best in channel installations.

Europelec - Model DISC AIR - Average Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

Treat your greases and aerate your tanks with the DISC'AIR. The EUROPELEC DISC’AIR medium bubble air diffuser has a simple design. It is made of high-performance materials that offer full resistance to corrosion.

AQUATUBE - Model 70 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

Aerate the waste water with the AQUATUBE 70. The cylindrical AQUATUBE 70 fine bubble air diffuser is covered with an EPDM membrane with evenly distributed micro-slots. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants. It works best in channel installations.

AQUADISC - Model 250 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants.

AQUADISC - Model 320 - Fine Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 320 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment plants.

Bubble Diffusers

by U&D Environmental Technology Co.,Ltd     based in Guangzhou, CHINA

Activated sludge wastewater aeration, Industrial wastewater treatment, Oxygenation for sludge stabilization, Aeration of ponds

Gummi-Jaeger - Bubble Diffuser for Bubble Aeration

by Jaeger Aeration     based in Longmont, COLORADO (USA)

Jaeger-AERATION has sold more than 12 million fine bubble wastewater aerator diffuser worldwide. Our core competence and sole focus is engineering, designing, and client support for bubble aerator assemblies and membranes. Our products are sold exclusively through more than 140 authorized partners, including supply companies, original equipment ...

Model SS Series - Plenum Coarse Bubble Diffusers

by Diffused Gas Technologies Inc.     based in Lebanon, OHIO (USA)

The SS Series Plenum Coarse Bubble Diffuser is designed for use in applications which require the delivery of higher CFM rates. Simplicity of design also makes the SS Series diffuser a cost effective alternative to other forms of coarse bubble diffusion. Its unitized design and construction has no moving parts to wear out or shake loose. These ...

Aqua - Ultra Fine Bubble Diffusers

by Aqua Systems (UK) Ltd.     based in Renfrewshire, UNITED KINGDOM

These are the finest diffuser in the world for use where pure gases e.g. oxygen, ozone and carbon dioxide etc. are used on a routine basis. The diffusers are available in three different sizes.

Mena Water - Fine Coarse Bubble Diffusers

by Mena Water     based in Sharjah, UNITED ARAB EMIRATES

Fine bubble diffusers are mainly used for oxygen transfer into biological wastewater treatment. These products can also be used for any kind of transfer of gases into liquids. Diffusers are fixed at the bottom of aeration tanks to produce a huge number of very fine air bubbles. The air bubbles rise to the surface providing enough amount of oxygen ...

AEROSTRIP - Model TYPE T - Fine Bubble Diffusers

by Aquaconsult Anlagenbau GmbH     based in Traiskirchen, AUSTRIA

The AEROSTRIP diffuser has been designed as a fine bubble diffuser device with very low energy demand, wich may be safely employed for domestic and industrial sewage treatment worldwide. The materials used for AEROSTRIP diffusers are resistant against all components which are permitted to be fed to a sewage treatment plant in accordance to German ...

Micro Bubble Diffuser

by U&D Environmental Technology Co.,Ltd     based in Guangzhou, CHINA

Membrane: silicone 3/4'. Diameter: 350mm(Standard 12'.). Aerator surface area: 0.0804 m2. Bubble diameter:0.8-1.9mm. Membrane service life: Above 7 years. Standard aeration rate: 8 m3/h. Aeration scope: 1~16 m3/h. Standard oxygen transfer efficiency: ≥38% (6m water depth). Working area: 0.5~2 m2/pcs.

Aqua EnduraDisc - Fine Bubble Diffuser

by Aqua-Aerobic Systems, Inc.     based in Loves Park, ILLINOIS (USA)

10 inch (25 cm) diameter, different slit patterns available to suit specific applications. Airflow Range: from 0.5 to 10 SCFM (0.8 to 17 m3/hr) per diffuser.  Performance: Standard oxygen transfer efficiency from 1.5% to over 2.0% per foot of submergence.  Diffuser performance is calculated for each specific application based on flux, ...

TreatMent - Fine Bubble Diffuser

by TreatMent     based in Tel Aviv, ISRAEL

Dissolved air flotation is a process used to separate solid (solids in suspension) and liquid (oils and grease) particles, and to separate and concentrate sludge.

Model MAD Series - Coarse Bubble Diffuser

by GloTech Corporation     based in Coconut Creek, FLORIDA (USA)

GloTech is your best choice for coarse bubble diffusers. We offer guaranteed competitive pricing, superior quality, and timely delivery on our MAD series diffusers. Private labeling and special OEM pricing are also available for select customers. GloTech MAD series stainless steel wide-band coarse bubble diffusers are a time-proven product for the ...

Cyclone - Coarse Bubble Diffusers

by RWL Water LLC     based in Minneapolis, MINNESOTA (USA)

CYCLONE Coarse Bubble Diffusers are the proven performer with years of non-fouling experience in wastewater. Easy to install and no scheduled maintenance make them perfect for any coarse bubble system. CYCLONE Diffusers feature 3 rows of airports, each providing a separate level of air discharge. The diamond shape design shears bubbles into ...

Aeration - Coarse Bubble Diffusers

by Environmental Remediation Equipment Inc. (ERE)     based in St. Leonard, QUEBEC (CANADA)

The Coarse bubble diffusers produce 1/4 to 1/2 inch bubbles which rise rapidly from the floor of a wastewater treatment plant or sewage treatment plant tank. They are typically used in air stripper chamber, grit chambers, equalization basins, chlorine contact tanks, and aerobic digesters, and sometimes also in aeration tanks. Coarse bubble ...

BWT - Disc Fine Bubble Diffuser

by BIOWATERTECH PRODUCT (BWT)CO., LTD.     based in Guangzhou, CHINA

Structure: 1.Membrane:Adopted the EPDM/Silicone  to melt. It can restrain the ageing effectively of the membrane, and protract the using life over 8 years. 2.Slit Hole :Adopted the '^' shaped for perforating to prevent adverse of waste water effectively and the bubble would be less than 0.3nn during aeration. 3.Base :Made by PP+FIBER GLASS , ...

Need help finding the right suppliers?

Let the XPRTs do the work for you