Bubble Diffuser Equipment Available In Australasia
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
For both industrial and municipal wastewater treatment Landustrie also supplies aeration systems with fine bubble diffusers. Fine bubble diffusers can be easily combined with the LANDOX flow booster for creating an optimal flow. With our process know-how and experience we are able to select the most efficient aeration ...
-
PremiumManufactured by Proco Products, Inc.based in USA
What Does a Coarse Bubble Diffuser Do? Coarse bubble diffusers aerate or mix wastewater for effluent / sewage treatment and pollution control. A coarse bubble diffuser produces bubbles which rise from the floor of a wastewater treatment plant or sewage treatment tank. They are ...
-
Manufactured by BIOETP Environmental Protection Engineering Co., Ltd.based in CHINA
BIOETP's fine bubble diffusers are a pollution control technology used to aerate wastewater for sewage treatment.Air disc fine bubble diffuser, which is used to transfer air and with that oxygen into sewage or industrial wastewater. BIOETP's fine bubble disc diffuser series combines effective ...
-
Manufactured by WTE srlbased in ITALY
AISI316L coarse bubble diffuser available with ISO G 3/4″ M or ISO G 3/4″ F threaded connection. Commonly used in sand and grease removal ...
-
Manufactured by Salherbased in SPAIN
The fine bubble diffusers DBF manufactured by Salher are composed of two PVC tubes connected to a “t” piece. An EPDM membrane develops around the tubes that diffuse the air distributed inside. The micro-cuts of the membrane work as a valve which releases the air under pressure and closes to the passage of water. As a result, a thin ...
-
Manufactured by Treat Ment CFSbased in ISRAEL
Dissolved air flotation is a process used to separate solid (solids in suspension) and liquid (oils and grease) particles, and to separate and concentrate ...
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
24 inch (61 cm) length, 304 L or 316 L stainless steel, open or closed bottom. Airflow Range: From 5.0 to 50 SCFM (8.5 to 85 m3/hr) per diffuser. Performance: Standard oxygen transfer efficiency of approximately 1.0% per foot of submergence. Diffuser performance is calculated for each specific application based on flux, density, ...
-
Manufactured by Aquaconsult Anlagenbau GmbHbased in AUSTRIA
The AEROSTRIPc is the high end product among the diffusers. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 1995. The diffuser body is made of high-alloy, corrosion-resistant stainless steel. This makes ...
-
Manufactured by Bioflow Industries Pvt Ltd.based in INDIA
Fine bubble diffusers are designed to produce small air bubbles that rise naturally from the floor of a wastewater treatment plant. These bubbles serve the vital function of efficiently transferring mass oxygen into the water, creating an optimal environment for biological processes. Fine bubble ...
-
Manufactured by Aquatech Internationalbased in INDIA
MATERIAL : EPDM /SILICON. DIAMETER : 63 MM. LENGTH : 610 MM. TYPE OF BUBBLE : FINE. SIZE OF BUBBLES : 1.0 to 2.0 MM. AIR FLOW RATE : 2.0 – 7.0 cum/hr. EFFECTIVE AREA OF MEMBRANE : 0.1 sq. m. OPERATING TEMPERATURE RANGE : 35 Deg. Celsius. TEMPERATURE TOLERANCE :Maximum 85 Deg. Celsius. SIZE OF END CONNECTION : ¾” NPT. ...
-
Manufactured by WTE srlbased in ITALY
AISI316L coarse bubble diffuser available with ISO G 3/4″ M or ISO G 3/4″ F threaded connection. Commonly used in sand and grease removal ...
-
Manufactured by Energy Equipmentbased in INDIA
Our organization is one of the most prominent and leading supplier and manufacturer of Coarse Bubble Diffuser. These products are fabricated under proper surveillance and guidance of highly skilled and well experienced experts. This product is best suited for industrial waste treatment and oxygenating water. This product is highly ...
-
Manufactured by Zhejiang Biocarriers Environmental Technologies Co., LTD.based in CHINA
Currently the aerator is widely used in sewage treatment process. In addition to the large consumption, it is also the core component of the sewage treatment process and can influence the operation quality and the effluent characteristics of a sewage plant directly. In regard to the traditional aerator, its tabular rubber diaphragm is tightly attached to the plane mounting plate or the ...
-
Manufactured by Bioflow Industries Pvt Ltd.based in INDIA
Wastewater treatment is a complex process that involves the removal of contaminants and pollutants from water before it is safely returned to the environment. Bioflow Industries Pvt Ltd is a reputed manufacturer and supplier of Coarse bubble diffusers, that are integral components in this process, facilitating the aeration stage. By ...
-
Manufactured by Great Lakes Bio Systems, Inc.based in USA
The MixAir Twister TB16 Diffuser is an open-spiral, multi-plane, fine bubble diffuser that provides both aeration and mixing in one efficient ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
The AEROSTRIP® Fine Bubble Membrane Diffuser is a strip diffuser, for use in continuous and intermittent biological processes. AEROSTRIP Diffusers by AquaConsult of Austria have been in operation since the early 1990’s and are providing significant benefits to numerous wastewater treatment plants with over 2000 ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Coarse bubble diffuser systems offer moderate oxygen transfer efficiency and low maintenance with aggressive mixing, providing circulation and turbulence that ensures the entire water column is mixed adequately and sludge accumulation is limited. They are a very robust solution, with no moving parts in the water and orifices that are less ...
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
10 inch (25 cm) diameter, different slit patterns available to suit specific applications. Airflow Range: from 0.5 to 10 SCFM (0.8 to 17 m3/hr) per diffuser. Performance: Standard oxygen transfer efficiency from 1.5% to over 2.0% per foot of submergence. Diffuser performance is calculated for each specific application based on flux, ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The AEROSTRIP Fine Bubble Membrane Diffuser is a strip diffuser, for use in continuous and intermittent biological processes. AEROSTRIP Diffusers by AquaConsult of Austria have been in operation since the early 1990’s and are providing significant benefits to numerous wastewater treatment plants with over 2000 installation ...
-
Distributed by Fluidesabased in PERU
Total effective length: 185*1070/270*1105 mm. Total height: 61 mm. Perforated area: 0.20 m2. Capacity: 2-25 m3/h. Membrane: EPDM and Silicone. Total weight: 3.53 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you