butterfly valve Equipment available in Palau

Available in Palau| Near Palau
495 Results found

We couldn't find any butterfly valve equipment in Palau

Here is a list of results available in Palau

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: butterfly valve ×

  • Available in: Australasia ×

  • Available in: Palau ×

Butterfly Valve

by Fireguard Safety Equipment Co Ltd.     based in Willenhall, UNITED KINGDOM

The Grooved End & Wafer type Butterfly valves are indicating type designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed. They are used, for example, as system, sectional, and pump water control valves. They have cut groove inlet and outlet connectionsthat are suitable for ...

Butterfly Valve

by Kirloskar Brothers Limited (KBL)     based in Pune, INDIA

KBL is pleased to offer top-of- line product in pipeline flow control. Kirloskar wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent ...

Butterfly Valves

by Philmac Pty Ltd     based in North Plympton, AUSTRALIA

FIP plastic butterfly valves are a light-weight, corrosion free high performance range offering a full flanged body and an ergonomic hand lever with locking device. FIP's FE and FK Butterfly Valves provide a Flanged, Plastic Butterfly Valve for maximum corrosion resistance for water and chemical transfer

Butterfly Valve

by Samsun Makina Sanayi A.S. (SMS)     based in Çankaya, TURKEY

Double flange and double eccentricity design, A lighter weigh due to ductile iron casting, Maintenance free long life cycle, Special hydraulic profile with low pressure loss, Due to low torque value, ease of open-close applications, 100% sealing on both sides, Stainless steel sealing surface preventing gasket from sticking to the surface and ...

AGS - Model Series W709 - Butterfly Valve

by Victaulic Company     based in Easton, PENNSYLVANIA (USA)

The Series W709 Advanced Groove System (AGS) butterfly valve for 26' -48'/650 - 1200 mm systems is available with handwheel, gear operator, electric, pneumatic or hydraulic actuators. Installs in less than one-third the time of cumbersome multi-bolt wafer, lug type or flanged valves.

Butterfly Valve

by FRANK GMBH     based in Mörfelden-Walldorf, GERMANY

Plastic diaphragm valves of FRANK are high resistant against corrosion and have a very low weight. Such valves are used in water treatment plants as well as in the process- and chemical industry.A wide spectrum of available housing- and sealing material allow a selection of the optimum configuration for the particular application.Now, we also ...

ABZ - Model 101 - Butterfly Valves

by Automated Valve & Control     based in La Porte, TEXAS (USA)

2'-12'  –   175Class  –  GENERAL PURPOSE  –  Wafer

ABZ - Model 102 - Butterfly Valves

by Automated Valve & Control     based in La Porte, TEXAS (USA)

2'-12'  –  175Class  –  GENERAL PURPOSE  –  Full Lug. Single-piece stem design assures even torque distribution and resilient seat provides positive shut off

eko - Model 1000&1100 Series - Butterfly Valve

by Ekoval Valve Company     based in SINCAN, TURKEY

eko1000 & eko1100 PN16 Wafer & Lug Type Butterfly Valves eko1200 PN16 Double Flanged Butterfly Valves eko1300 Triple Eccentric Butterfly Valves.EKOVAL 1000 Series Butterfly Valves can be used as throttling valves with gearbox.For every size gearbox can also be supplied by Ekoval Co..Ekoval 1000 Model Wafer type butterfly valves can ...

Metallic seat - Model FA SERIES - Butterfly Valve

by Ghibson Italia srl     based in Monteveglio(BO), ITALY

DN 50 + 1000 / 2' + 40'.PN 6 - 10 - 16 - 25 ANSI 150.Wafer - Double flange DN 50 + 1000 / 2' + 40'.PN 6 - 10 - 16 - 25 ANSI 150 P max 2 Bar...

Model CL150 MJ - Butterfly Valves

by M&H Valve Company     based in Anniston, ALABAMA (USA)

All butterfly valves shall be of the rubber-seated, tight-closing type. They shall meet or exceed AWWA standard C504, latest edition, Class 150. All valves shall be M&H 4500/1450 butterfly valves, or approved equal.

Model 800 Series - Butterfly Valve

by PureFlex, Inc.     based in Kentwood, MICHIGAN (USA)

The 800 series valve body is manufactured from Durcor®-62™, PureFlex proprietary advanced fiber reinforced composite. Durcor®-62™ reinforcing fibers are long and interlocked; this interlocked reinforcement system transfers loads throughout the fiber matrix making the 800 series valve body virtually indestructible. It has ...

Model 201 Series - Butterfly Valves

by Sirca International S.p.A     based in Trezzano Rosa (Mi), ITALY

Wafer type, suitable for PN10 flanges, light type for regulation, no 100% bubble tight, available from Ø1' 1/2 A Ø40'.

Model 385,386,387 - Butterfly Valve

by Omal S.P.A     based in Rodengo Saiano, ITALY

Available range: from DN 40 to DN 300. PN 10 - PN 16. Standard flanges: PN 10=PN 16 - from DN 40 to DN 150. PN 10 or PN 16 from DN 200 to DN 300. On request PN 16 from DN 200 to DN 300. General requirements in accordance with UNI EN593:2009. Face to face as per EN 558 serie 20. Valve head as per ISO 5211:2003. Tightness as per EN 12266-1 rate A. ...

Model DN 900-1000 - Butterfly Valve

by Vexve Oy     based in Sastamala, FINLAND

Body:Steel, EN 10028-3 P355NL1 (1.0566).Disc:EN GX5CrNiMo19-11-2 (1.4408).Seat:Alloy 825.Shaft:EN X3CrNiMoN27-5-2 (1.4460).Shaft seal:Graphite.Bearings:PTFE+AISI 316 net.Trim:PN 16 or PN 25.FlangesEN 1092-1.Available PN 16 and 25.Operation:Valves are available with manual gear, electric actuator or hydraulic actuator.

Model 860 Series - Butterfly Valve

by PureFlex, Inc.     based in Kentwood, MICHIGAN (USA)

PureFlex 860 series valve take resilient seated butterfly valve technology to the nest generation in reliability. The valve is bubble tight at full rated pressure of 150psi, has triple stem seals for unmatched leak free dependability and it can operate at temperatures between -60°F to +250°F (consult factory for higher temperature ...

Model 375,376,377 - Butterfly Valve

by Omal S.P.A     based in Rodengo Saiano, ITALY

Standard flanges: PN 10 - PN 16 - ANSI 150 from  DN 40 to DN 300. PN 10 from DN 350 to DN 600. General requirements in accordance with UNI EN593:2009. Face to face as per EN 558 serie 20. Valve head as per ISO 5211:2003 ( DN40-DN300 ). Tightness as per EN 12266-1 rate A. Other tests on request. Operating Temperature of the Media:  EPDM ...

Model 22/23 Series - Butterfly Valve

by Bray International     based in Houston, TEXAS (USA)

Extensive field research and engineering have developed this state-of-the-art design which provides excellent shut off protection (bubble- tight shut off) and high CV values. The Series 22/23 butterfly valve is crafted in a variety of materials such as PTFE, Stainless Steel, UHMWPE and special alloys to fit a wide range of customer requirements. ...

SwissValve - Model CST-K - Butterfly Valve

by ChemValve-Schmid AG     based in Welschenrohr, SWITZERLAND

Wafer or lug type with two-piece body. Face-to-face length according to DIN EN 558-1, Basic Range 20. Interface for automation according to DIN EN ISO 5211:2001. Compliant with DGRL 97/23/EG

Model RDE - Butterfly Valve

by AGS-Stellantriebe GmbH     based in Schloß Holte-Stukenbrock, GERMANY

Nominal size: DN 25 - 250.Flanges: PN 6-16.max. temperature: +120°C.Design examples:

Need help finding the right suppliers?

Let the XPRTs do the work for you