butterfly valve Equipment in Canada

66 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: butterfly valve ×

  • In: Canada ×

Mueller - Model Lineseal III - Butterfly Valves

by Terminal City Iron Works Ltd     based in Langley, BRITISH COLUMBIA (CANADA)

Meets or exceeds all applicable requirements of ANSI/AWWA C504 Standard Class 150B; NSF 61 certified. Buried service valves: I.D. and O.D. coated. Body - Cast Iron ASTM A-126. Flanges drilled per ANSI B16.1 Class 125. Above ground valves (ordered with either a handwheel, position indicator on the actuator, or lever): minimum 4 mills epoxy coated ...

Bray McCannalok - Butterfly Valve

by Bray International     Office in Montreal, QUEBEC (CANADA)

The Bray/McCannalok’s innovative design offers rugged reliability and extremely easy maintenance in the field. Independent and internal tests prove Bray/McCannalok’s superior service life capability, with zero-leakage shut-off. The Bray/McCannalok High Performance Valve delivers the highest quality and highest value available for ...

Model 20/21 Series - Butterfly Valve

by Bray International     Office in Montreal, QUEBEC (CANADA)

The Series 20/21 butterfly valve not only surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. Bray's Series 20 valve is a wafer version with flange locating holes, and the Series 21 is the companion lug version for dead-end service and other flange requirements.

AWWA - Model E8000 - Butterfly Valve

by Elite Valve Canada     based in Brantford, ONTARIO (CANADA)

Elite butterfly valves are designed for water and wastewater applications in accordance with the latest revision of AWWA C504 Class 150B service and comply with the following details.

Model 22/23 Series - Butterfly Valve

by Bray International     Office in Montreal, QUEBEC (CANADA)

Extensive field research and engineering have developed this state-of-the-art design which provides excellent shut off protection (bubble- tight shut off) and high CV values. The Series 22/23 butterfly valve is crafted in a variety of materials such as PTFE, Stainless Steel, UHMWPE and special alloys to fit a wide range of customer requirements. ...

Model BYB Series - Butterfly Valves

by Hayward Flow Control     Office in Oakville, ONTARIO (CANADA)

BYB Series butterfly valves are available in PVC, CPVC, PP and PVDF bodies. Discs are available in CPVC, PP and PVDF. All BYB Series have a 410 SSTL shaft.  Liners are FPM, EPDM or Nitrile.

IPEX - Butterfly Valves

by IPEX     based in Verdun,, QUEBEC (CANADA)

These highly versatile valves can be used for simple on/off service but also for processes requiring precise throttling. End-of-line installation of the lugged version allows for downstream piping disassembly with the upstream system still under pressure. The extensive size range and material availability make them applicable in a wide range of ...

Model BYCN Pure-Blu Series - Butterfly Valves

by Hayward Flow Control     Office in Oakville, ONTARIO (CANADA)

BYCN Pure-Blu Series Butterfly Valve sizes 2 in. to 8 in. PVC Body and PVC Disc only. All liners and seals are EPDM. Type 316 Stainless Steel Shaft. BYCN Pure-Blu™ butterfly valves are offered with a lever handle or a gearbox. NSF/ANSI 61 Listed

Mosites - Model C10N - Butterfly Valve

by Media Valve Co., Inc     Distributor in Laval, QUEBEC (CANADA)

The Mosites C10 Butterfly Valve, which is fully elastomer lined, is in use throughout the world in a wide range of critical service applications. The control of water, chemicals, air, slurries, and vapors to 150 psi bubble-tight shut off can be achieved with the Mosites Butterfly Valve. The C10N incorporates the same unique features as the C10 and ...

Mosites - Model C30 - Butterfly Valve

by Media Valve Co., Inc     Distributor in Laval, QUEBEC (CANADA)

The Mosites C30 Butterfly Valve was developed to fill an industry need for a high cycle, fully elastomer lined butterfly valve. If your processes involve chemicals, slurries, water, air or vapors, the C30 can solve your control problems. It is available in the standard Mosites face to face dimension.

Mosites - Model A20N - Butterfly Valve

by Media Valve Co., Inc     Distributor in Laval, QUEBEC (CANADA)

The Mosites A20N Butterfly Valve was developed in response to market demand for a high cycle butterfly valve. Reduced torque and low profile disc increases the A20N cycle capabilities and economizes your actuation cost. Uniquely suited for applications involving continuous cycling, the Mosites A20N Butterfly Valve provides reliable service in flow ...

Mosites - Model A20 - Butterfly Valve

by Media Valve Co., Inc     Distributor in Laval, QUEBEC (CANADA)

The Mosites A20 Butterfly Valve was developed in response to market demand for a high cycle butterfly valve. Reduced torque and low profile disc increases the A20 cycle capabilities and economizes actuation cost. Uniquely suited for applications involving continuous cycling, the Mosites A20 Butterfly Valve provides reliable service in flow control ...

Model DN750 - Butterfly Valves

by Litostroj Power     Office in Bromont, QUEBEC (CANADA)

Inlet butterfly valve is installed between the penstock and the turbine unit and is used to shut off the water flow during the shutdown, maintenance or in case of emergency conditions. It consist of a tube casing, with a moving one or two plan valve body. It uses weights and hydraulic pressure for closing and oil operated hydraulic system for ...

AWWA - Model C504 Flanged 3” to 24” - Butterfly Valves

by GA Industries, LLC     Office in ONTARIO (CANADA)

Tested and Certified by NSF to NSF/ANSI Standard 61'. ANSI Class 125 flanged Class 150B or Class 250B rated ductile iron body - superior strength. Ductile iron disc with 316SS seat edge - tough and corrosion resistant. Fully rubber lined waterway with integral seat vulcanized to body - durable and corrosion resistant. Class 150B has 304SS shaft, ...

Mosites - Model C10 - Butterfly Valve

by Media Valve Co., Inc     Distributor in Laval, QUEBEC (CANADA)

The Mosites C10 Butterfly Valve, which is fully elastomer lined, is in use throughout the world in a wide range of critical service applications. The control of water, chemicals, air, slurries, and vapors to 150 psi bubble-tight shut off can be achieved with the Mosites Butterfly Valve.

IFC - Model Series BI125W/L - Resilient Seated Butterfly Valves

by Islip Flow Controls (IFC)     based in Burlington, ONTARIO (CANADA)

The IFC series BI125W/L butterfly valve is available in sizes 2” thru 48”, wafer or lug body design. These valves were designed to meet the stringent requirements for HVAC, Oil & Gas and Industrial applications, or wherever positive shutoff is required for liquids, gases and slurries.

Model 8400 - Wafer Butterfly Valve

by Elite Valve Canada     based in Brantford, ONTARIO (CANADA)

The 8400 have been specifically designed for heavy duty on-off throttling from 2”- 24” in diameter. Completely weather proof and rugged design allows for it to be a perfect addition to any line with a Buna N standard seat.

Henry Pratt - Model 2FII - Bonded Seat Butterfly Valve

by Henry Pratt Company - a subsidiary of Mueller Water Products, Inc.     Distributor in QUEBEC (CANADA)

Available in sizes 3 through 20 inches, Conforms to AWWA C504, Class 150B, Bonded seat -in-body, Manual, Cylinder and Motor Actuation.

Model 700/722 Series - Resilient Seated Butterfly Valve

by DynaQuip Controls Inc.     Distributor in Oakville, ONTARIO (CANADA)

DynaQuip 700/722 Series butterfly valves are designed to provide years of rugged durability at a competitive value. Built for HVAC, utility, commercial and general industrial applications and media, these valves offer many more years of performance over lightweight throwaway valves. This valve can be automated – see our DynaFly 70F/72F ...

High Performance Butterfly Valves

by A-T Controls, Inc.     Office in Penetanguishene, ONTARIO (CANADA)

Automated with Pneumatic Spring Return Actuator, Double Acting Actuator, or Electric Actuator with optional Explosion Proof. ANSI/ASME Class 150# and 300# Wafer and Lug Style. Sizes 2” - 24” in Stock (larger sizes available).

Need help finding the right suppliers?

Let the XPRTs do the work for you