Only show results available in Virginia? Ok

calibration gas cylinder equipment

  • Premium

    Baseline - Model Series 8990 - Permeation Calibrator

    The Baseline Series 8990 Permeation Calibrator allows a user to generate custom gas calibration standards. Using certified permeation devices and precision flow rates a user can generate a range of accurate gas standards. This ability relieves the user from purchasing multiple expensive bottled gasses, allows the replacement and addition of ...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA). from Permeation Calibrator Product line

  • Premium

    IMR - Calibration Gas Kit

    Standard features of the kit include; Calibration hose. Carrying case with shoulder strap (58 liter size only). Regulator for disposable calibration gas cylinder, stainless steel, fixed flow rate 1.5 liter/min.

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA). from Calibration Gas Kit Product line

  • Premium

    ENVEA (ex Environnement S.A) - Model MGC101 - Multi-Gas Calibrator for Ambient Air Gas Analyzers

    MGC101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point Internally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

    By ENVEA based in Poissy, FRANCE. from Multi-Gas Calibrator for Ambient Air Gas Analyzers Product line

  • Premium

    Sonimix - Model Sx 6000 C1 - Multipoint APM Multigas Calibrator

    Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

    By LNI Swissgas SA based in Versoix, SWITZERLAND. from Multipoint APM Multigas Calibrator Product line

  • Premium

    Calib - Model XXX931 - Internal or External Calibrator Systems

    We propose a range of calibration systems with permeation tubes installed inside an analyzer or a multiplexer. In option, we can provide these calibration systems in a separate box. Our analyzers can control the solenoide vanne selection of a standard gas cylinder.

    By Chromatotec Group based in Val de Virvée, FRANCE. from Internal or External Calibrator Systems Product line

  • Model 8057A Series - General Purpose Gas Detector

    The Model 8057AGeneral Purpose Gas Detector effectively monitors the workplace air for potentially dangerous gas leaks from tubing, equipment, containers, reaction vessels, cylinder valves, and pressurized systems. The Threshold Limit Value (TLV) for most gases can be detected. Weighing only 14 ounces (400 gms), this truly portable and personal ...

    By Chrysalis Scientific Technologies Inc. based in Oakville, ONTARIO (CANADA). from General Purpose Gas Detector Product line

  • Premium

    CO2 Zero Calibration Kit for Guardian NG CO2 Monitors

    The Zero Calibration Kit acts as a convenient alternative to bottled gas for checking zero offsets and if necessary, zero calibration. It works by removing the CO2 from the air being drawn into the instrument, providing a cost effective alternative to nitrogen or other zero gas from a cylinder. The Zero Calibration Kit is compatible with all CO2 ...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM. from CO2 Zero Calibration Kit for Guardian NG CO2 Monitors Product line

  • SpecAir - Model Enviro-Cyl - Portable Refillable

    The SpecAir Speciality Gases product line offers a refillable, portable calibration gas cylinder as an alternative to standard disposable cylinders. The Enviro-Cyl product calibration gas cylinder offers many advantages over disposables.

    By SpecAir Specialty Gases based in Auburn, MAINE (USA). from Portable Refillable Product line

  • Premium

    Sonimix - Model Sx 3057 - Self Regenerable Zero Air Generator

    The self regenerable zero air generator Sonimix 3057 is the ideal add-on for analytical devices mounted in 19” racks. It allows the supply of carrier gas for calibration systems devices with GPT (Gas Phase Titration) and gas dividers without the need of expensive and cumbersome zero air pressurized cylinders.

    By LNI Swissgas SA based in Versoix, SWITZERLAND. from Self Regenerable Zero Air Generator Product line

  • Model P1880 - Gas Cylinder

    Gas Cylinder from CONPEC’s P1879 Series Calibration Kits. See Options below for part numbers for your specific gas requirements.

    By Conspec Controls Limited based in Burlington, ONTARIO (CANADA). from Gas Cylinder Product line

  • Calibration Gas

    These cost effective cylinders are filled with certified precision gas mixtures for calibration and response check “bump testing” of gas leak detectors or research instrumentation. “Home made” chlorine gas is uncontrollable as well as dangerous. The high concetration of chlorine in a 150 lb process cylinder is lethal to ...

    By Foxcroft Equipment & Service Co. Inc. based in Glenmoore, PENNSYLVANIA (USA). from Calibration Gas Product line

  • Model 142 Series - Calibration Gas

    The 142 series of calibration test stands is specifically designed to calibrate all monitors. The stands feature an on/off pressure reducing regulator, no pressure adjusting and a color-coded flowmeter to give the precise flow required for all popular monitors. Calibration kits are available for all CSE sensors and contain a carrying case, ...

    By CSE Corp based in Export, PENNSYLVANIA (USA).

  • Matheson - Portable Gas Cylinders

    MATHESON Portables is a sweeping product line including pure gases, calibration standards, multicomponent mixtures, and two component mixtures. Packaging for standards and mixtures includes lightweight aluminum cylinders and portable steel cylinders. Many are intended for one-time use, and are disposable. A complete array of pure gases is offered ...

    By Matheson Tri-Gas, Inc. based in Montgomeryville, PENNSYLVANIA (USA). from Portable Gas Cylinders Product line

  • SpecGas - Calibration Gas Mixtures

    Our complex calibration gas mixtures enable you to calibrate your gas chromatography equipment, moisture analyzers or FTIR analyzer. Our single and multi-component calibration mixtures are produced utilizing our proprietary blending techniques that ensure accurate and stable blends. Some of our reactive calibration mixtures include Ammonia, ...

    By Specgas Inc. based in Warminster, PENNSYLVANIA (USA).

  • Owlstone - Model OVG-4 - Calibration Gas Generator

    The Owlstone Vapour Generator (OVG-4) is a compact, cost effective calibration gas system, which can generate NIST traceable, precise, repeatable and accurate concentrations of chemicals and calibration gas standards. Designed for calibration of industrial and scientific gas sensors, the OVG-4 incorporates permeation tube technology and can ...

    By Owlstone Nanotech, Inc. based in Norwalk, CONNECTICUT (USA). from Calibration Gas Generator Product line

  • Disposable Calibration Gas

    Our custom calibration gases are also available in a variety of smaller, portable, and disposable cylinders. Disposable calibration gas is an economical alternative for applications where a low gas volume is needed.  Some examples include the testing of equipment used in flammable or toxic gas detection, ethanol breath testing, gas ...

    By SCI Analytical Inc based in Zephyrhills, FLORIDA (USA).

  • OI-520 Calibration Station

    The Otis Instruments, Inc. Model OI-520 Calibration Station is a precision gas blender that simplifies the calibration of air quality instruments. The OI-520 is able to blend a wide range of calibration gas levels from a single cylinder. This feature saves money by substantially reducing the number of calibration gas cylinders required and often ...

    By Otis Instruments, Inc. based in Bryan, TEXAS (USA).

  • Environics - Gas Chromatography Calibration System

    Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the ...

    By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Chromatography Calibration System Product line

  • AMC - Model C1 Series - Calibration Kits

    The proper preventative maintenance of your gas detection system will ensure that it is always performing optimally, and safely. Our C1 series of calibration kits include professional grade regulators, calibration adapaters, a convenient carry case, and will work with a variety of industry standard 58L and 103L gas cylinders.

    By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA). from Calibration Kits Product line

  • Calibration Kits

    A typical calibration kit is composed by:Calibration Gas Cylinders (103L, 76L or 58L), CCS-1 Cup/Guard Adapter (use CC-SIR100 when being used with Infrared SIR100 gas detector), 0.5 LPM Regulator/Pressure Indicator, Carrying Case, feet high density Polyurethane Tubing.

    By Micro-Watt Control Devices Ltd. based in Calgary, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you