Calibration Gas Instrument Equipment In USA
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
This instrument has been specifically tailored to fit the high PPM range of hydrogen detectors. The GENie EC output can be adjusted down in order to accommodate the calibration of the low level leak checking instrumentation currently on the ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The CAL 101 is our newest and most economical calibration gas instrument. Field replaceable calibration gas sources (generating cells) provide immediate calibration gas for Chlorine, Hydrogen Sulfide, Hydrogen and Hydrogen ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The CAL 2000 LT is the calibration gas instrument of choice for the user who does not need variable flow rates or concentrations. The CAL 2000 LT is available in pre-set flow-rates of 0.5 or 1.0 PPM. Field replaceable calibration gas sources (generating cells) provide a calibration standard for ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The Cal 2000 provides unmatched versatility and accuracy in calibration gases. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Chlorine Dioxide, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The GENie QC-1 is our newest gas instrument for ammonia calibration gas. By utilizing a sealed glass ampule that is broken for use, the GENie QC-1 is the perfect tool for anyone calibrating fixed or portable ammonia sensors. With user adjustable outputs, the GENie QC-1 can be set to a wide range of outputs ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The GENie O3 is the latest in our line of portable calibration gas standards. Small, lightweight and operating on four AA batteries, the GENie O3 can be utilized in its fanny pack by a technician climbing around equipment to calibrate the most difficult to reach ozone sensors. Plugged in to mains power, the instrument can ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The Cal101 Bump Station calibration gas instruments' unique design allows for the calibration of gas detectors as well as the bump testing of them. We utilize the bump test switch on the instrument in such a way that it can be held down easily and as long as it is, the instrument ...
-
Manufactured by QED Environmental Systems, Incbased in USA
LANDTEC’s certified primary standard grade calibration gas assures highest quality for your instrument calibration needs. Landtec calibration gases are supplied with color-coded bands at the top of the label for easier visual identification. “Please note that shipments of calibration ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The MiniBump is an ultra-small calibration gas instrument specifically designed for 'bump' testing chlorine, hydrogen, hydrogen cyanide and hydrogen sulfide gas ...
-
Manufactured by Modern Safety Techniques (MST) Inc.based in USA
on “CALIBRATION AND ADJUSTMENT” in the instruction manual furnished with the instrument. It will save time and conserve calibration gas if the instrument is “warmed up” and the calibration adjustment controls have been located on the instrument prior to screwing the regulator on ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power ...
-
Manufactured by Thermo Fisher Scientific Australia Pty Ltdbased in AUSTRALIA
The Gas Dilution System (GDS) is an easy to use electronic device designed to take a known calibration gas or gas sample and dilute it to lower concentrations. he diluted gas output can be used for calibrating gas detection instruments or can be presented to ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
FPI PDC-100, a highly integrated portable calibrator with an internal air compressor. One device can complete clean zero gas generating and calibrate gases output. The high precision mass flowmeters with external cylinders is used to provide span gas required for zero point and span point calibration for ...
-
Manufactured by Teledyne APIbased in USA
The Model T753U is a portable, microprocessor based precision Calibrator for Ozone gas instruments and sensors. Using a sophisticated Ozone generation system, combined with a sensitive photometer and pneumatic design, the T753U produces stable and reliable concentrations of Ozone in a convenient and rugged package based on our popular ...
-
Manufactured by Drägerwerk AG & Co. KGaAbased in GERMANY
Automatic bump tests, calibration, reduced test gas consumption, short testing times and comprehensive documentation come standard in this new device from Dräger, the experts in gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you