Calibration Gas Standard Equipment
-
Manufactured by Chemtron Science Laboratories Private Limitedbased in INDIA
CSL offers a complete line of gas calibration standards from a single source which allows its customers to save time and money by consolidating vendors and centralizing responsibility. CSL offers certified gas standards which provides the ultimate in accuracy and traceability for the most demanding analytical ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra's CalTrak 500 is an accurate primary standard gas flow calibrator for all inert ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Bring the world’s most accurate flow standard to your lab with the CalTrak 800. The 800 is used for calibration and verification of: Mass flow meters, Controllers, Variable area flow ...
-
Manufactured by Fluke Calibrationbased in USA
Laminar flow elements for flow from 1 sccm to 100 slm; molbloc-Ls are laminar flow elements for use with molbox mass flow terminals. The molbloc flow path is the longitudinal, annular gap between a piston and a close fitting cylindrical bore in the molbloc body. Different molbloc ranges are obtained by varying the size of the gap. For high flow ranges (size 1E4 and above), a larger molbloc body ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4020 can mix up to seven (7) component gases simultaneously to generate precise gas calibration standards and gaseous atmospheres in a broad dynamic range. The dilution capabilities of the Series 4020 allows dilution ratios from 1:1 to 10,000:1 (with larger ranges possible, depending on the configuration of the ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of gas blends is assured with the Series 4020UHP Ultra-High Purity Gas Mixing/Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An all in one solution including dual combined autoGCs FID: airmoVOC C2C6 and airmoVOC C6C12. This solution is provided worldwide for ozone precursors monitoring in ambient air. The airmOzone utilizes the airmoVOC C2-C6 and an airmoVOC C6-C12 with FID to monitor ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 906 CO2 Analyzer is designed for continuous or spot measurement and analysis of carbon dioxide levels. Analysis ranges of 0-5,000ppm, 0-10,000ppm, 0-25,000ppm, 0-20%, or 0-100% vol/vol. Simply introduce your sample gas flow into the inlet of the Model 906 CO2 analyzer, and see results on the LCD within 15-20 seconds. The ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Series 4000 UHP Gas Mixing System combines the accuracy and repeatability of the Series 4000 with a welded, Ultra-High-Purity (UHP) construction. All units are optimized for your target gases. With all metal seals, units are commonly used for both research & development and/or production applications, including ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements. The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same ...
-
Manufactured by MESA Specialty Gases & Equipmentbased in USA
MESA Specialty Gases & Equipment offers a complete line of gas calibration standards from a single source allowing you to save time and money by consolidating vendors and centralizing responsibility. Select the analytical tolerance you need to best suite your specialty gas requirements. MESA Specialty Gases offers two types ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 4000 consists of a single chassis now supporting up to eight mass flow controllers. The mass flow controllers are factory calibrated using a primary flow standard traceable to the United States National Institute of Standards and Technology (NIST). Each flow controller utilizes an 11 point calibration table with linear ...
-
Manufactured by MESA Specialty Gases & Equipmentbased in USA
MESA Specialty Gas & Equipment manufacture a broad range of high quality custom calibration gas standards for use in laboratory, R&D, University and industrial analysis applications. Custom calibration gas standards are manufactured using state of the art gravimetric and ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The GENie O3 is the latest in our line of portable calibration gas standards. Small, lightweight and operating on four AA batteries, the GENie O3 can be utilized in its fanny pack by a technician climbing around equipment to calibrate the most difficult to reach ozone sensors. Plugged in to mains power, the instrument can ...
-
Manufactured by KIN-TEK Analytical, Inc.based in USA
KIN-TEK Industrial Gas Standard Generators are used in industrial environments. These instrument systems use Trace Source permeation tubes to deliver calibration gas standards directly to your process GC, GC-MS, or any type of gas analyzer. KIN-TEK Gas Standard ...
-
Manufactured by Owlstone Inc.based in USA
The Owlstone Calibration Gas Generator (OVG-4) is a compact, cost-effective calibration gas system, which can generate NIST traceable, precise, repeatable, and accurate concentrations of chemicals and calibration gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you