Calibration Gas Zero Equipment
-
Manufactured by Teledyne APIbased in USA
The T701H adds Modbus TCP/IP connectivity to the proven reliability and performance of our high purity zero air system. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature and output pressure. Additionally, this digital access provides the ability to remotely ...
-
Manufactured by Teledyne APIbased in USA
The Model T750U is a portable, microprocessor based calibrator for precision trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750U is housed in a ...
-
Manufactured by Teledyne APIbased in USA
The Model T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas ...
-
Manufactured by Teledyne APIbased in USA
The Model 751H is a portable, fully self-contained source of high purity zero air for dilution calibrators. It is ideal for use with sensitive analyzers in ambient background and trace level applications. Packaged in a wheeled, high density plastic case, the Model 751H provides ultra-high purity output with a warm-up time of 30 ...
-
Manufactured by Teledyne APIbased in USA
The Model T703 Photometric O3 calibrator combines an ozone generating device and photometer to provide a specified ozone concentration by volume for precision gas analyzers. The Model T703 can deliver concentrations from 50 ppb to 5 ppm at flows from 1 LPM to 5 ...
-
Manufactured by Teledyne APIbased in USA
The Model T703U is a microprocessor controlled ozone calibrator for precision gas analyzers. Expanded ozone audit levels have created a need for precise ozone calibration well below the capabilities of standard calibrators. The Model T703U is designed to meet the requirements of ultra-low ozone ...
-
Manufactured by Teledyne APIbased in USA
The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded ...
-
Manufactured by Teledyne APIbased in USA
The Model T700U is a microprocessor based calibrator for precision, trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero checks using up to 4 gas ...
-
Manufactured by Teledyne APIbased in USA
The Model T753U is a portable, microprocessor based precision Calibrator for Ozone gas instruments and sensors. Using a sophisticated Ozone generation system, combined with a sensitive photometer and pneumatic design, the T753U produces stable and reliable concentrations of Ozone in a convenient and rugged package based on our popular ...
-
Manufactured by Teledyne APIbased in USA
The T701 adds Modbus TCP/IP connectivity to the proven reliability and performance of our zero air systems. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature, and output pressure. Additionally, this digital access provides the ability to remotely disable the internal ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Employs FID method featuring superb response characteristics and stability. Allows highly sensitive and highly precise continuous measurement. Measurement can be performed in 7 ranges and in a range ratio of 0 to 10/30,000 ppm C, making it possible to safisfy a wide variety of ...
-
Manufactured by Ionicon Analytik Ges.m.b.H.based in AUSTRIA
Multiport sampling devices, based on multiplexing valves or custom built gas-stream selectors allow for sampling at different location and bring down your cost per sampling ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system ...
-
Manufactured by Orthodyne S.A.based in BELGIUM
The AZ 8000 is a Trace Nitrogen Analyser. Its unique design brings reliability and accuracy needed for such measurement. Its own Plasma Emission Detector System extends the lifetime of the cell. This Duty Cycle Controlled System has the property to decrease contamination and coating inside the plasma cell giving a more efficient, reliable and accurate ...
-
Manufactured by American Ecotech LLCbased in USA
The Ecotech 8301 Series Zero Air Generator has been designed to supply zero air (contaminant free) to a Dilution Calibration System. The system comprises a rack-mounted compressed air source, permeation dryer and a series of scrubber options, depending on application, producing clean, dry, dilution quality “zero ...
-
Manufactured by LDetek - a brand by Process Sensing Technologies (PST)based in CANADA
With its plug and play philosophy and offering more features than ever, LDetek pushes further the possibilities with its new chromatograph system. It provides an attractive and cost effective solution for the industrial and laboratory market. Based on the LDetek high performance detection technology, this stand-alone Gas ...
-
Manufactured by Unisensor Sensorsysteme GmbHbased in GERMANY
CARBOSCAN 300 is a turnkey, factory-calibrated system for the online process monitoring of CO2 gas which ensures end-to-end quality assurance. The system uses the method of optical absorption spectroscopy to identify contaminants: it can identify even the tiniest traces of contaminants (down to sub PPB levels) using the light ...
-
Manufactured by AMA Instruments GmbHbased in GERMANY
In unattended operation mode, online GC's and other instruments for air quality and industrial site monitoring applications require to be checked frequently and to be calibrated as ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an ...
-
Manufactured by SIGAS Measurement Engineering Corp.based in CHINA
S-ANALYZER 200 UV series is a multi-gas analyzer for 19"rack-mounting with intergrated NDUV Gas sensor, up to 5 components can be measured. S-ANALYZER 200 UV is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you