Calibration Kit Equipment Available In Illinois
-
PremiumManufactured by CO2Meter, Inc.based in USA
These reusable jars are made to easily calibrate relative humidity in the pSense High Accuracy Portable CO2 Meter and our pSense CO2 + CO + RH/T Portable Meter & Data Logger. To use simply unstopper the jar, insert the probe into the jar, and start the calibration mode. It's that easy! Note: Each meter has specific instructions on ...
-
Manufactured by Sensit Technologiesbased in USA
Calibration kits are used to verify and set an instrument to a known sample of gas. Calibration is not just making sure the instrument reads zero at turn on. When calibrating, you are adjusting the sensor output to equal the display reading as well as verifying the performance of the product. This should be documented and ...
-
Manufactured by ALL BLUE LLCbased in USA
ALL BLUE's calibration kit contains all the calibration supplies necessary to begin analysis with a new thermal mercury analyzer including: Set of 6 Aqueous Mercury Standards (Specify Regular or Low-Level Kit). Eppendorf Reference or Research Plus 10-100 µL Pipette. Box of Pipette Tips. 500 grams Sodium Carbonate. 200 grams ...
-
Manufactured by Rosenberger Hochfrequenztechnik GmbH & Co. KGbased in GERMANY
Rosenberger, as a dependable development partner of highly accurate industrial measurement technology, develops and produces a comprehensive range of calibration kits for a variety of standard and precision interfaces for vector network analyzers (VNAs). ...
-
Manufactured by Medocbased in ISRAEL
Medoc’s Calibration Kit can be used to check and recalibrate thermal stimulators of all types. The Calibration Kit can be bought with various masks, each specific to its designated thermode. Medoc recommends regularly checking and calibrating thermodes to assure stimulation precision and safety. Please ...
-
Manufactured by Modern Safety Techniques (MST) Inc.based in USA
MST’s 8003101 Calibration Kit is furnished with a non-adjustable regulator to ease the calibrating procedure. WARNING: To avoid damage to the monitor’s sensor, regulator provided in this kit must be used. Before attempting to use this kit, be certain that the components are connected as shown in the sketch below ...
-
Manufactured by Cantium Scientific Limitedbased in UNITED KINGDOM
Our new Qualisair™ qCR Calibration and Service Kit (Part Number A-00422) is now available to buy for your calibration and service ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Bio-Pump Plus with TSI 4046 Calibrator Kit includes a TSI 4046 calibrator, all connection pieces required to connect to the Zefon Bio-Pump Plus and a hard side carrying case. The Zefon Bio-Pump® Plus is the smallest, lightest and easiest to use portable, battery-powered IAQ pumps designed for exclusive use with ...
-
Manufactured by AlpHa Measurement Solutionsbased in USA
Calibration kit consists of three (3) calibration sensors, a lead standard solution, four (4) syringes, three (3) sample ...
-
Manufactured by In-Situ Environmentalbased in USA
Use the Chloride Calibration Kit to calibrate chloride Ion Sensitive Electrodes (ISEs) for the Aqua TROLL 500 and Aqua TROLL 600 Multiparameter ...
-
Manufactured by In-Situ Environmentalbased in USA
Use the Nitrate Calibration Kit to calibrate nitrate Ion Sensitive Electrodes (ISEs) for the Aqua TROLL 500 and Aqua TROLL 600 Multiparameter ...
-
Manufactured by In-Situ Environmentalbased in USA
The Conductivity Calibration Kit is Ideal for multi-point calibrations, this kit contains NIST-traceable conductivity calibration solutions in three ...
-
Manufactured by AlpHa Measurement Solutionsbased in USA
Calibration kit consists of three (3) calibration sensors, a lead standard solution, four (4) syringes, three (3) sample ...
-
Manufactured by AirMetricsbased in USA
Each kit includes one digital manometer, one calibration orifice, a louvered inlet, tubing, a sturdy all-weather case and a calibration curve traceable to ...
-
Manufactured by In-Situ Environmentalbased in USA
The pH Calibration Kit is deal for multi-point calibrations, this kit contains a set of three NIST-traceable pH solutions for both pH and ...
-
Manufactured by In-Situ Environmentalbased in USA
Use this standard to calibrate ammonium Ion Sensitive Electrodes (ISEs) for the Aqua TROLL 500 and Aqua TROLL 600 Multiparameter ...
-
Manufactured by Bioporto Diagnostics A/Sbased in DENMARK
Instructions: Measurements should be carried out in accordance with the specific application note for the automated chemistry analyzer used. Please see the Instructions for Use for The NGAL Test™ Reagent Kit ST001, which also give details of test principle and performance characteristics of The NGAL ...
-
Manufactured by In-Situ Environmentalbased in USA
Use this kit containing sodium sulfite (Na2SO3) calibration solution and DI water when calibrating probes at 0% ...
-
based in USA
The LC-100 Calibration Kit is a complete set of tools designed to provide an accurate, reliable and portable method for calibrating the LevelCom LC-100 Tank Level ...
-
Manufactured by Rel-Tek Corporationbased in USA
The Kal-Kit is a convenient portable calibration kit containing everything needed to calibrate Rel-Tek (and most other) gas sensors. It contains two 20-liter tanks of cal gas, usually zero and a selected span gas. Tanks are nested in a shock resistant bed, rigidly captured by a brace and wing nut. Brass needle valves control the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you