calibration kit Equipment

464 Results found
Only show results in Virginia?
OK
  • Keyword: calibration kit ×

Lufft - Model IRS31 - Calibration Kit

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

Two sodium chloride solutions according to the freezing temperature -2.0°C (+/- 0.5K) and -10.0°C (+/- 0.5K).

Pollution - Calibration Gases Kit

by Pollution Srl     based in Budrio, ITALY

Kit composed of 12 one-liter @ 12bar 7 20°C gas cylinders. Not rechargeable. They contain Technical Air or Span Gas (Propane in Technical Air, at different equivalent concentrations of total Carbon).

IC Controls - Model ph-kit: - pH Calibration Kit

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

This kit conveniently packages the requirement for buffer calibrations in amounts for easy use, along with the necessary utensils and accessories. These items are provided in durable plastic so that you are assured reliable and accurate results while making the technician's job easier.

IC Controls - Model cond-kit: - Conductivity Calibration Kits

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

As part of the IC Controls ongoing commitment to assure our customers the best possible results from their conductivity systems, we QC standards to NIST materials. The calibration kits that have been made available conveniently package the requirements for conductivity calibrations, in amounts for easy use. Necessary utensils and accessories are ...

IC Controls - Model orp-kit - ORP Calibration Kit

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The ORP calibration kit conveniently packages the requirements for ORP calibrations in the right amounts for easy use. The necessary utensils and accessories, made of durable plastic, are included in the kit. Using this kit you are assured of reliable and accurate results while at the same time the technician's job is made easier.

Zero Calibration Kit For Guardian NG CO2 Monitors

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

The long term drift in calibration of a Guardian  NG NDIR gas monitors is due to a variety of ageing factors most of which result in a small change in the relative strength of the IR signals reaching the detectors. This produces a very slow drift in the zero reading. Due to the nature of the detection process this zero offset produces a much ...

TPH-Oil Calibration Kit - Use with TD-500D for Testing Total Petroleum Hydrocarbons

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

This product contains three linear calibration solutions used for accurate TD-500D analysis. A reference standard is also included for backup, used to make new calibration standards if necessary. Sitelab calibration kits are supplied with a 3-month or 6-month expiration date.

EDRO Calibration Kit - Use with UVF-3100D for Testing Extended Diesel Range Organic Hydrocarbons

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing hydrocarbons in the C10 to C36 extended diesel and oil range. Results will directly correlate to U.S. EPA Method 8015-DRO or other laboratory methods using GC instrumentation. Kits are re-usable for 3 months. Available in methanol or hexane solvent. ...

Calibration Kit

by Modern Safety Techniques (MST) Inc.     based in Hicksville, OHIO (USA)

MST’s 8003101 Calibration Kit is furnished with a non-adjustable regulator to ease the calibrating procedure. WARNING: To avoid damage to the monitor’s sensor, regulator provided in this kit must be used. Before attempting to use this kit, be certain that the components are connected as shown in the sketch below and read the section on ...

Calibration Kits

by Micro-Watt Control Devices Ltd.     based in Calgary, ALBERTA (CANADA)

A typical calibration kit is composed by:Calibration Gas Cylinders (103L, 76L or 58L), CCS-1 Cup/Guard Adapter (use CC-SIR100 when being used with Infrared SIR100 gas detector), 0.5 LPM Regulator/Pressure Indicator, Carrying Case, feet high density Polyurethane Tubing.

Calibration Kit

by Sensit Technologies     based in Valparaiso, INDIANA (USA)

Calibration kits are used to verify and set an instrument to a known sample of gas. Calibration is not just making sure the instrument reads zero at turn on. When calibrating, you are adjusting the sensor output to equal the display reading as well as verifying the performance of the product. This should be documented and performed per your ...

Calibration Kit for Uranium

by ANDalyze     based in Champaign, ILLINOIS (USA)

Calibration kit consists of three (3) calibration sensors, a lead standard solution, four (4) syringes, three (3) sample tubes.

Calibration Kit for Lead

by ANDalyze     based in Champaign, ILLINOIS (USA)

Calibration kit consists of three (3) calibration sensors, a lead standard solution, four (4) syringes, three (3) sample tubes.

TMS LevelCom - Model LC-100 - Calibration Kit ( LC-CalKit )

by Technical Marine Service, Inc. (TMS)     based in Portland, OREGON (USA)

The LC-100 Calibration Kit is a complete set of tools designed to provide an accurate, reliable and portable method for calibrating the LevelCom LC-100 Tank Level Gauges.

PAH Calibration Kit - Use with TD-500D for Testing Polycyclic Aromatic Hydrocarbons

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

This product contains three linear calibration solutions used for accurate TD-500D analysis. A reference standard is also included for backup, used to make new calibration standards if necessary. Sitelab calibration kits are supplied with a 3-month or 6-month expiration date.

GRO Calibration Kit - Use with UVF-3100D for Testing Gasoline Range Organic Hydrocarbons

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Sitelab Product No. CAL-025. Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing volatile petroleum hydrocarbons, including BTEX, in the C6 to C10 gasoline range. Results will directly correlate to U.S. EPA Method 8015-GRO or other laboratory methods using GC instrumentation. Kits are re-usable for 3 ...

TPH-Oil Calibration Kit - Use with UVF-3100D for Testing TPH Oil & Grease

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Ideal for sites contaminated with crude oil, heavy fuel oil or waste oil. Kit contains ready to use standards available in methanol or hexane solvent. Kits are re-usable for 3 months. Certificate of analysis and MSDS included.

PAH Calibration Kit - Use with UVF-3100D for Testing PAHs and EPH Aromatic Hydrocarbons

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing Total PAHs or Target PAHs. Results will correlate to the sum of 16 PAH compounds reported by U.S. EPA Method 8270 or other laboratory methods using GC instrumentation. Kits are re-usable for 3 months. Available in methanol or hexane solvent. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you