Calibration System Equipment In Australasia
-
PremiumManufactured by Environics, Inc.based in USA
The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, hydrocarbons and more. Custom options can be selected for calibration of ammonia, HCl and a variety of other gases of interest. The S6100 is a great option for dilutions from ppm or lower level cylinders. The S6100 can now be ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Automatic gas calibration is available by using calibration gas and prefilled calibration cell. The gas cell is filled with a mixture of gases allowing all gases measured by the system to be checked. All data from gas calibration and automatic QAL 3 checks are stored in separate calibration data ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 9100 Computerized Ambient Monitoring Calibration System consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The Series 9100 is operated through a large, worksheet format ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6110 Computerized Ozone Generation - Calibration System produces accurate, stable ozone for calibration of ambient air analyzers or for creating specific ozone environments for research. The Environics® Series 6110 is an ozone generation system that can be designed with or without separate zero air ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with ...
-
Manufactured by Norsonic ASbased in NORWAY
Did you know that all the equipment needed to build up your own Calibration Laboratory is available as off-the-shelf products from Norsonic ...
-
Manufactured by Norsonic ASbased in NORWAY
Calibrations according to international standards IEC and ANSI. Class 1 sound analyser. Equipment fully complies with ISO and IEC standards. Air Conduction, Bone Conduction and Free Field support. Turn key system including all couplers available. Supports many types of output transducers. Different tests available (frequency, speech, ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The new SoundAdvisor Audiometer Calibration System AudCal is a field-ready solution for fast, comprehensive audiometer calibration. The system combines the power and versatility of the SoundAdvisor Model 831C sound level meter with the accessibility and functionality of the LD G4 Utility Software. AudCal works seamlessly with a ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Fully automatic system for pH and ORP measuring points in all industries. The Liquiline Control CDC90 plug & play system automates Memosens pH and ORP measuring points in all industries. It cleans, validates, calibrates and adjusts up to two sensors automatically, reducing maintenance effort, improving working safety in harmful ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
-
Manufactured by Hach - Veraltobased in USA
System is designed to perform calibration verifications per USEPA Method 334.0: Determination of Residual Chlorine in Drinking Water Using an On-Line Chlorine Analyzer. The method includes start-up and ongoing QC procedures for grab sample instruments and on-line ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It ...
-
Manufactured by Gastec Corporationbased in JAPAN
Even calibration gas of very low concentrations can be continuously ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you