can crusher equipment in Germany

  • Model VG8 - Can Crusher

    The can crusher is fed via the open feed door which can accept cans and trading units up to 30 liters. Once the feed door is closed, the compaction process starts with a simple touch of the start button. The ram head compacts the containers to form a flat package, returns to its starting position, and the motor shuts off automatically. The package ...

    By BIG Entsorgungstechnologien GmbH based in Bad Tölz, GERMANY.

  • Mil-tek - Model 101 - Can Crusher

    The Mil-tek Can Crusher Model 101 is the ideal solution for compacting tins, cans, drums, and buckets, reducing volume by 90%. With no electric parts, the Can Crusher is easy to clean and maintain and its small footprint means the Can Crusher can be installed in any location. Many tins and cans contain hazardous waste such as oil or paint, the ...

    By Mil-tek Office in Holzkirchen, GERMANY. from Can Crusher Product line

  • Mil-tek - Model 2101 - Aluminum Can & Drum Crusher

    The Mil-tek 2101 Can Crusher compacts tins, cans, drums and buckets up to 30L in size, reducing their volume by 90%.

    By Mil-tek Office in Holzkirchen, GERMANY.

  • Hansek - Spiral Crusher

    The Hansek spiral crusher can be used to shred a wide range of materials. The material is placed into the machine through the inlet and is transported to the shredding head by a freely running spiral. Here, the material is ground between a fixed disc and a rotating disk. The ground material falls through the machine outlet and can be transported ...

    By Hansek Maschinenbau GmbH based in Billerbeck, GERMANY.

  • BTS - Model MF60hd - PET Crusher

    The BTS-MF60hd was designed for hard materials like cans, PET and plastic. Crusher allows increasing the volume reduction of up to 90%, thereby reducing disposal costs. Compacting creates an enormous volume reduction, available storage and cargo space so the allowed transport weight can be exploited efficient.

    By Beckmann Technik & Service KG based in Brakel, GERMANY. from PET Crusher Product line

  • WEIMA - Model Woodwolf - Crusher Machine

    The Woodwolf is a unique machine designed to act as a pre-crusher. It can be used as a stand-alone unit or as part of a two-stage process that incorporates a WLK shredder. A 600 mm (diameter) screw crushes the input material (such as pallets, big chipboard or furniture) into standard paper-size. The Woodwolf can be placed over the top of a ...

    By WEIMA based in Ilsfeld, GERMANY. from Crusher Machine Product line

  • Model F26 - Drum Crusher

    After opening the safety feed door, the drum can be placed on the platform of the drum crusher. The drum centering system automatically ensures the correct positioning of the drum. Close the feed door, and start the compaction cycle with a simple push of a button.

    By BIG Entsorgungstechnologien GmbH based in Bad Tölz, GERMANY.

  • Model MBG - Big Crusher

    The MAIER Big Crusher MGB is the ideal solution for the reduction of wooden bulky material and other brittle residues. The machine is used for the pre-crushing of waste wood, pallets, furniture, cable drums, wood residues, damaged boards, railway ties, root stumps or electronic waste.Material can be directly fed over the large-dimensioned infeed ...

  • Model CC420 - Concrete-Crusher

    The CC 420 - The powerful with minimal weight. Crushes concrete up to 400 mm,  Cuts reinforcements up to 28 mm,  Special steel replaceable breaking-tips, Replaceable armoured cutting-tips, With a small load-bearing device it can be used inside, Greater breaking power for the difficult job of breaking-up heavily armoured concrete.

    By Darda GmbH based in Blumberg, GERMANY.

  • PÖMA - Model SB 182 - Stone Crusher

    The POMA - Stone-crusher SB 182 is made for very heavy work. All kinds of stones can be crushed. The biggest diameter could be up to 30 cm. The machine can be used for construction- and maintenance work on gravel roads. in one run the road building material is broken, mixed and graded. The depth control is made hydraulically via wheels. The mixed ...

    By PÖMA Maschinenbau based in Groß Denkte, GERMANY. from Stone Crusher Product line

  • Metso EtaCrush - Model ZB Series - Turnings Crusher

    The large centrifugal mass of the disc rotor ensures that the required high torque performance is generated. A dosage comb prevents high current peaks and straightens tangled turnings.  Coarse parts that are not discharged via the grid openings are thrown out by the coarse part ejector, which can optionally be opened by advanced ...

    By Metso Recycling Equipment based in Duesseldorf, GERMANY. from Turnings Crusher Product line

  • Vacoline - Chip Crusher

    Vacoline® from LANNER. The Vacoline is a fully automatic solution in crushing and transporting chips by means of vacuum suction, which is directly integrated in the machine tool itself. Chips are crushed with a LANNER chip crusher in the machine tool. Mistakenly insert tramp metals are automatically ejected. Chips are transported through ...

    By Lanner Anlagenbau GmbH based in Kippenheim, GERMANY. from Chip Crusher Product line

  • ALLU - Screener Crusher Bucket

    ALLU Screener Crusher bucket is a versatile accessory for a wheel loader, excavator or skid steer. With ALLU Screener Crusher you can screen, crush, pulverise, aerate, blend, mix, separate, feed and load materials all in one stage.

    By ALLU Finland Oy Ltd Office in Bünde, GERMANY. from Screener Crusher Bucket Product line

  • BHS Sonthofen - Model RSMX - Rotor Centrifugal Crusher

    Our rotor centrifugal crusher (type RSMX) is a high-performance vertical-shaft crusher for throughput rates of 30 to 400 t/h, depending on the model. Every single particle of the input material undergoes extreme acceleration in the patented twin-chamber rotor and is subsequently thrown against the fixed impact wall. The impact wall can consist of ...

    By BHS-Sonthofen GmbH based in Sonthofen, GERMANY. from Rotor Centrifugal Crusher Product line

  • UMS - Model RCC - Rotor Chain Crusher

    CORE RCC – Rotor Chain Crusher for the first processing stage: Stripping, cleaning and initial delamination of composites. UMS’ CORE RCC is an internationally proven universal device for the first stage of the recycling process e.g. for electric and electronic waste (E-waste), blended metals, aluminum compounds etc. Objects with a unit ...

    By Urban Mining Solutions GmbH based in Remscheid, GERMANY. from Rotor Chain Crusher Product line

  • Core - Model RKZ - Rotor Chain Crusher

    CORE RKZ – Rotor Chain Crusher for the first processing stage: Stripping, cleaning and initial delamination of composites. UMS’ CORE RKZ is an internationally proven universal device for the first stage of the recycling process e.g. for electric and electronic waste (E-waste), blended metals, aluminum compounds etc. Objects with a unit ...

    By Urban Mining Solutions GmbH based in Remscheid, GERMANY. from Rotor Chain Crusher Product line

  • Kleemann - Model MOBIREX MR 110 Z EVO 2 - Mobile Impact Crusher

    EVO 2 is the consequent evolution of the successful EVO Contractor Line with an additional benefit in terms of economy and operation safety. Universally adaptable plant which is suited for processing both blasted natural stone, asphalt and demolition waste as well as producing a first-class end quality product. Despite its comparatively ...

    By Kleemann GmbH based in Göppingen, GERMANY. from Mobile Impact Crusher Product line

  • Kleemann MOBICAT - Model MC 100 R EVO - Smallest Jaw Crusher

    Smallest jaw crusher in the MOBICAT model range, the design of which is heavily based on the MC 110 R and its appearance is also very similar. It also impresses with its familiar diesel-direct-electric drive concept, which is already used in the other EVO plants. With the overall smaller system dimensions, the crusher inlet size is 950 x 550 mm, ...

    By Kleemann GmbH based in Göppingen, GERMANY. from Smallest Jaw Crusher Product line

  • Model HCM - Concrete Crushers / Demolition Shears

    The new generation of concrete crushers / demolition shears named ‘multiprocessor’ has been developed for universal use for heavy work in demolition and recycling. These multiprocessors are designed for excavators from 8 to 50 tons. These devices can be applied for primary and secondary demolition efficiently and without any problems.

    By KONVERMA Abbruchgeräte based in Schemmerhofen, GERMANY. from Concrete Crushers / Demolition Shears Product line

  • Model HCR - Concrete Crushers / Demolition Shears

    The concrete crushers /demolition shears of the HCR series have been developed for extensive and heavy work regarding demolition and recycling universal use for heavy work in demolition and recycling. These multiprocessors are universally designed and applicable for excavators from 7 to 40 tons. These devices can be applied for primary and ...

    By KONVERMA Abbruchgeräte based in Schemmerhofen, GERMANY. from Concrete Crushers / Demolition Shears Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you