can leak equipment in Connecticut

  • Pond Pro - Concrete Pond Leaks

    PondPro Concrete is a one coat application. Unlike other systems on the market it does not require a primer or 2nd coat; saving our customers time and money.

    By Pondpro2000 based in Shelton, CONNECTICUT (USA).

  • Non-Destructive Leak Testers

    WILCO provides non-destructive leak testers utilizing a pressure decay sensor which precisely monitors the atmosphere surrounding a container within our test chambers. A gas transfer through a leak in the container creates either a pressure increase or decrease in the corresponding test chamber.

    By Wilco AG Office in North Branford, CONNECTICUT (USA). from Non-Destructive Leak Testers Product line

  • Premium

    ACME - Model VOC-3 - Refrigerant Leak Detector

    The VOC-3 detector is designed for enclosed spaces or mechanical rooms where refrigerant leaks from chillers could pose a danger to personnel. This detector can cover up to 10,000 sq. ft. of clear, open space. It is designed to operate two-speed fans using two dry contacts that close at the appropriate low and high concentration levels for the ...

    By Acme Engineering Prod. Ltd. Distributor in Tolland, CONNECTICUT (USA). from Refrigerant Leak Detector Product line

  • Premium

    ACME - Model REF-IR-ST - Refrigerant Leak Sensor/Controller

    The ACME REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0 to 1000PPM measuring range and operating temperature and ...

    By Acme Engineering Prod. Ltd. Distributor in Tolland, CONNECTICUT (USA). from Refrigerant Leak Sensor/Controller Product line

  • Model AE - High Pressure Decay Machines

    Wilco AG is contributing to the Aerosol sector by providing state of the art leak testing technologies to fulfill all quality requirements defined by the FEA, either for empty steel or aluminum aerosol cans. Our technical solutions for leak detection on 3 piece steel and aluminum monobloc cans support the substitution of the hot water bath test ...

    By Wilco AG Office in North Branford, CONNECTICUT (USA). from High Pressure Decay Machines Product line

  • Model 3800 Series, Item # 43426 - Pancake Liquid Level Switch

    Double wall tanks. Containment piping. Ideal for leak detection systems. Operates down to -40°F. Positive signals. Very economical. Not affected by translucent films. Can be immersed continuously in any media compatible with wetted parts. No special controls necessary. No excitation voltage necessary. No false indications.

    By Thomas Products Ltd. based in Southington, CONNECTICUT (USA). from Pancake Liquid Level Switch Product line

  • Liquid Filled Container (LFC)

    Measuring the loss of vacuum inside a test chamber as a result of gas leakage or liquid vaporization from a leak. Our LFC testing method is a powerful leak detection technology, which measures the loss of vacuum inside a test chamber as a result of gas leakage or liquid vaporization from a leak. Since the vaporization of even a very small amount ...

    By Wilco AG Office in North Branford, CONNECTICUT (USA). from Liquid Filled Container (LFC) Product line

  • Pondpro2000 - Pond Sealant Use on Existing EPDM, Vinyl and PVC Liners

    The Industry's ONLY one coat 5 year unconditional warranty! Fix/Repair Pond and Fountain Leaks ONCE with PondPro. Pond Pro as seen in Water Garden News and Pond Trade Magazine! Are you having difficulty finding that leak? Do your water levels keep dropping? With a 25 year history of success, our Liquid EPDM fixes pond leaks and fountain leaks the ...

    By Pondpro2000 based in Shelton, CONNECTICUT (USA).

  • SpillEraser

    SpillEraser is a proprietary and patented green formulation that provides a spray-and-leave it solution for quickly cleaning oil and fuel leaks without digging or interrupting daily operations. Advanced microemulsion oxidization chemistry that can be sprayed around fuel tanks, oil storage tanks, pumps, oil wells, equipment pads and pipelines to ...

    By VeruTEK Technologies, Inc. based in South Windsor,, CONNECTICUT (USA). from SpillEraser Product line

  • Premium

    ACME - Model QD-REF Series - Quadset Refrigerant Gas Monitor

    The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm.

    By Acme Engineering Prod. Ltd. Distributor in Tolland, CONNECTICUT (USA). from Quadset Refrigerant Gas Monitor Product line

  • Pondpro2000 - EPDM Pond Liner

    For many of us who have experience a pond leak with our pond liners we know all too well the enormous task it is to remove an existing epdm pond liner once a leak occurs. For many of us that required of course the water and a safe temporary place for our fish but also involves removing all the surrounding plants, slate, decorations etc. Once the ...

    By Pondpro2000 based in Shelton, CONNECTICUT (USA).

  • NFM - Model ePTFE - Membrane Technology

    High durability, high efficiency ePTFE membrane helps meet EPA requirements (PM2.5, MACT, NESHAP) and will reduce Total Cost of Ownership with: Reduced emissions (PM10, PM2.5 and Sub-Micron PM). Lower operating differential pressure. Longer effective life cycle of bags and pleated bags. Aids in recovery from upset conditions such as moisture, ...

    By National Filter Media (NFM) Office in Wallingford, CONNECTICUT (USA). from Membrane Technology Product line

  • Model PLT - Pipette Leak Testing Unit

    Improve process reliability with functional validation of air-displacement pipettes! The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons, or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors.

    By Brand GMBH + CO KG Distributor in Essex, CONNECTICUT (USA). from Pipette Leak Testing Unit Product line

  • Model 0-5 to 0-200GPM - Differential Pressure Flow Meter

    Our new, fully integrated differential pressure flow meters are compact and rugged, with directly connected, large throated, non-clogging flow nozzles. This unique design reduces size and cost while minimizing errors and leaks. Simply select the flow rate and material, and you're set. There is no need to choose a primary flow element, a ...

    By Orange Research Inc. based in Milford, CONNECTICUT (USA). from Differential Pressure Flow Meter Product line

  • Premium

    ACME - Model VOC-2 - Volatile Organic Compounds Detector

    The VOC-2 detector is designed for enclosed spaces where chemical reagents or known VOC pollutants could leak into the air and pose a danger to personnel. This detector can cover up to 10,000 sq. ft. of clear, open space. It is designed to operate two-speed fans using two dry contacts that close at the appropriate low and high concentration levels ...

    By Acme Engineering Prod. Ltd. Distributor in Tolland, CONNECTICUT (USA). from Volatile Organic Compounds Detector Product line

  • Veeder-Root - Model MAG - Sump Sensor

    Quickly and accurately detect the presence and the amount of water and/or fuel in the containment sump or dispenser pan. Using proven magnetostrictive technology to detect hydrocarbons or water, Veeder-Root’s Mag Sump Sensor produces fast reaction and recovery times, which eliminates costly and unwarranted service calls and sensor ...

    By The Veeder-Root Company based in Simsbury, CONNECTICUT (USA). from Sump Sensor Product line

  • SPI - Angle Bracket Berms

    The SPI Angle Bracket Berm is a one-piece, thermally bonded spill and secondary spill containment berm.  It's light enough to carry but tough enough to contain vehicles, generators or even above-ground oil tanks and electrical transformers — whether energized or spares.  Unlike other containment berms, setup is simple and quick: ...

    By Solidification Products International, Inc. (SPI) based in Northford, CONNECTICUT (USA).

  • Model 102 - Snap-On Analyzers

    The Model 102 is a considerably upgraded replacement for earlier Models PI101, HW101, DL101, 101N, & IS101.  It has enhanced features such as a faster response time, extended range, elimination of any moisture sensitivity, capability of having up to 4 sensors plus a ppb range, and improvements such as a pump & datalogging. The Model ...

    By Quadrex Corporation based in Woodbridge, CONNECTICUT (USA). from Snap-On Analyzers Product line

  • Oil Only Absorbents – Pads and Rolls

    Our oil only absorbents selectively absorb petroleum based liquids while repelling water to mitigate oil spills. They will float on water or hug the ground and are ideal for oil spill cleanup and containment. Available in a wide variety of sizes at the best price, these include oil only pads, rolls, sweeps, socks, booms and pillows. Our oil only ...

    By Guardian Environmental Technologies, Inc. based in New Preston, CONNECTICUT (USA). from Oil Only Absorbents – Pads and Rolls Product line

  • Quadrex - Model PH Series - Hydrogen Generators

    The PH Series Hydrogen Generators are the ideal alternative dangerous and expensive gas cylinders in your laboratory. Use the Peak Hydrogen Generator for your GC's FID flame source, carrier gas, or your HALL detector's reaction gas. All purities are at 99.9995%. Adjustable delivery pressure 0 - 100psi. Outlet port is 1/8'. Pressure dew point is ...

    By Quadrex Corporation based in Woodbridge, CONNECTICUT (USA). from Hydrogen Generators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you