Capillary Column Equipment Available In Turkey
-
Manufactured by Dikma Technologies Inc.based in USA
100% Dimethyl polysiloxane. General purpose column of non-polar phase. Long lifetime. Temperature range: -60 ºC to 350 ºC. Bonded and cross-linked phase, solvent rinsable. DM-1MS is a low bleed column, use for MSDs. Similar to DB-1, SPB-1, HP-1, etc. Equivalent to USP G1, G2, G38 ...
-
Manufactured by Dikma Technologies Inc.based in USA
DM-35 35% diphenyl / 65% dimethyl polysiloxane. DM-35MS 35% diphenyl / 65% dimethyl arylene ...
-
Manufactured by ANPEL Laboratory Technologies (Shanghai) Inc.based in CHINA
These sulfate deactivated alumina PLOT columns are highly dependable columns for fast and efficient hydrocarbon and petrochemical analysis. The selectivity of the sulfate deactivated alumina version allows for the separation of C1-C8 hydrocarbons. This column also provides elution of acetylene after n-butane. The Alumina Sulfate PLOT ...
-
Manufactured by Teknokroma AnlÃtica, SA.based in SPAIN
(95%) Dimethyl-(5%) diphenyl polysiloxane, crosslinked and chemically bonded phase. The TRB-5MS column uses the same stationary phase as TRB-5, but the polymer synthesis process, the capillary deactivation technique and the bonding and crosslinking procedures have been optimized to obtain the minimum possible bleeding level and an ...
-
Manufactured by PRAMA INSTRUMENTS Pvt Ltd.based in INDIA
Specifications:-, Diameter (Metric) Inner 0.25 mm, Stationary Phase, 6% Cyanopropylphenyl/-94% Dimethyl Polysiloxane Max., Temperature 350°C Temperature Range -20°C to +260°C, Length (Metric) 30 m, Packing Material , Rtx™-1301 (G43), Coating, Fused Silica, For Use With (Application) Crossbond™,, Oxygenates Analysis, Residual Solvents Analysis,, Volatile Organic Compounds ...
-
Manufactured by Dikma Technologies Inc.based in USA
DM-1HT 100% Dimethyl polysiloxane. DM-5HT 5% diphenyl / 95% dimethyl ...
-
Manufactured by Dikma Technologies Inc.based in USA
5% diphenyl / 95% dimethyl polysiloxane, general purpose column with low polarity phase. DM-5 column has a slightly higher polarity compared to DM-1, resulting in a better selectivity for aromatic compounds. DM-5 column exhibits excellent reproducibility, high column efficiency, and low bleed. DM-5MS column ...
-
Manufactured by SGE Analytical Sciencebased in USA
ProteCol Capillary Columns feature an integrated column and connection tubing design to achieve excellent peak symmetry and efficiency. The combination of PEEKsil column and 50µm ID connecting tubing with a zero dead volume design allows optimum flow characteristics with minimal dispersion. The integrated PEEKsil connecting ...
-
Manufactured by Dikma Technologies Inc.based in USA
14% cyanopropylphenyl / 86% dimethyl polysiloxane, general purpose column of mid-polarity phase. DM-1701 is one of the most popular stationary phases. The mix of cyano and phenyl functional groups increases polarity and offers a different elution order compared to DM-1 or DM-5 column. DM-1701 column exhibits low bleed, high inertness and ...
-
Manufactured by Dikma Technologies Inc.based in USA
DM-17 50% diphenyl / 50% dimethyl polysiloxane. DM-17MS 50% diphenyl / 50% dimethyl arylene ...
-
Manufactured by Dikma Technologies Inc.based in USA
DM-5MS / LB (low bleed) column is coated with a 5% diphenyl / 95% phenyl arylene dimethyl polysiloxane phase, which can inhibit the formation of ring-shaped fragments of siloxane skeleton, thereby reducing column bleed and increasing the thermal stabilty. The stationary phase has better stability; and will not exhibit oxidative degradation ...
-
Manufactured by ANPEL Laboratory Technologies (Shanghai) Inc.based in CHINA
These chloride deactivated alumina PLOT columns allow for the separation of C1-C8 hydrocarbons. It is also used in the ASTM methods. The Alumina Chlonde PLOT is less polar than other Alumina ...
-
Manufactured by Frontier Laboratories Ltdbased in JAPAN
Ultra ALLOY metal capillary columns were first introduced in 1991. The columns are characterized by their inertness, high temperature stability and mechanical ...
-
Manufactured by ANPEL Laboratory Technologies (Shanghai) Inc.based in CHINA
The basic capillary column composed of two parts: the tubing and the stationary phase in general there are two kinds of tubings- quartz (Tube coated with polyimide) and stainless ...
-
Manufactured by MaSaTECH, s.r.o.based in SLOVAKIA
The PeakMachine allows two dimensional separation of volatiles compounds presented in complex matrix. The combination of Multi Capillary Column GC (MCCGC) with ion mobility spectrometer makes this instrument excellent for analysis of liquid and solids samples via the headspace technique. The 2D separation of PeakMachine is based on ...
-
Manufactured by Quadrex Corporationbased in USA
The SLP-2560 is a non-bonded high polarity 100% biscyanopropyl polysiloxane phase. Columns coated with SLP-2560 are ideal for detailed cis/trans FAMES applications. As a non-bonded phase, columns coated with SLP-2560 should never be rinsed. Maximum temperature is 250°C. Similar Phases: CP-Sil 88, HP-88, RT-2560, ...
-
Manufactured by Quadrex Corporationbased in USA
The SLP-2560 is a non-bonded high polarity 100% biscyanopropyl polysiloxane phase. Columns coated with SLP-2560 are ideal for detailed cis/trans FAMES applications. As a non-bonded phase, columns coated with SLP-2560 should never be rinsed. Maximum temperature is 250°C. Similar Phases: CP-Sil 88, HP-88, RT-2560, ...
-
Manufactured by Quadrex Corporationbased in USA
Reliable permanent gas analysis. Rugged layer of molecular sieve. Excellent thermal stability to regenerate adsorbent layer. Similar column types: GS-Molesieve, Rt-MSieve 5A, AT-Mole ...
-
Manufactured by Quadrex Corporationbased in USA
Phase Code: SLP-2560 Column Length (M.): 100M. Column ID (mm): 0.25mm Film (microns): ...
-
Manufactured by Quadrex Corporationbased in USA
The SLP-2560 is a non-bonded high polarity 100% biscyanopropyl polysiloxane phase. Columns coated with SLP-2560 are ideal for detailed cis/trans FAMES applications. As a non-bonded phase, columns coated with SLP-2560 should never be rinsed. Maximum temperature is 250°C. Similar Phases: CP-Sil 88, HP-88, RT-2560, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you