Showing results for: Carbon Monoxide Sensor Equipment
-
Manufactured by INNOVAER TECHNOLOGIES, LLC.based in USA
The ECO-5011 Meets UL2034, EN50291 and ROHS application requirements; Designed for battery powered applications with low power requirements; Environmentally friendly electrolyte with robust sensor packaging to ensure technology wont ...
-
Manufactured by Zhengzhou Winsen Electronics Technology Co., Ltd.based in CHINA
ME2-CO-Ф14x15-C electrochemical sensor detect gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target gas are in direct ...
-
Manufactured by Purelogic Labsbased in INDIA
The most effective and efficient method of measuring CO is electrochemical technology. In this process, the co sensor takes a sample of air and when this air reaches the working electrode a chemical reaction happens which produces electricity either by oxidation or reduction. ...
-
Manufactured by Shenzhen MIXSEN Electronics CO.,LTDbased in CHINA
Carbon Monoxide ( Co ) gas sensor is electrochemical gas sensor,the concentration of the gas could be get by measuring value of current.We have different types of CO sensors, except the sensor, we also have modules and we can supply one-stop gas sensor solutions.The most hotsale ...
-
Manufactured by Shenzhen MIXSEN Electronics CO.,LTDbased in CHINA
MIX8010 Carbon Monoxide(CO) Gas Sensor is a battery operable electrochemical carbon monoxide(CO) gas sensor developed by Mixsen. Carbon monoxide and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction ...
-
Manufactured by Ambest Electronics (Ningbo) Co Ltdbased in CHINA
monitor module.]. Advanced electronics in conjunction with a semiconductor gas sensor provide early detection of carbon monoxide gas and high immunity against unwanted alarms. The 400-003 CO alarm range provides fire detection and alarm system designers with a Standards-compliant, economical gas detector for life safety and property ...
-
Manufactured by Sentecbased in CHINA
SPECIFICATIONS Measuring range CO2 concentration: 0~5000ppm Response time ≤10s (1m/s wind speed) Signal output Analog signal: 4~20mA, 0~5VDC, 0~10VDC Digital signal: RS485 output (Modbus protocol) Warm-up time 2min (available), 10min (maximum accuracy) Working voltage 10~30VDC Note: 0~10VDC output (limited to 24VDC power supply) Digital output Device address: 1~255 can be set, the ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 1400C is a portable Flue Gas Analyzer for commercial and industrial applications.The rugged combustion analyzer can be equipped with up to 4 sensors. Its basic unit has an O2 (Oxygen) and a CO (Carbon Monoxide) sensor. The other two sensors are customer selectable as well as the measuring ranges.The IMR ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 2800P is a portable Flue Gas Analyzer for industrial applications. The rugged combustion analyzer can be equipped with up to 8 sensors. Its basic unit has an O2 Oxygen sensor , a CO Carbon Monoxide sensor, a NO Nitric Oxide sensor and a SO2 Sulfur Dioxide Sensor. The ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 1400CP is a portable Flue Gas Analyzer for commercial and industrial applications. The rugged combustion analyzer can be equipped with up to 4 sensors. Its basic unit has an O2 (Oxygen) and a CO (Carbon Monoxide) sensor. The other two sensors are customer select-able as well as the measuring ranges. The ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CO is a robust CO Gas Monitor that can measure Carbon Monoxide parameters in the air. This CO gas detector uses Electrochemical Sensing technology to measure total CO concentration in the air. The monitor is equipped with a CO sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in coal and biomass storage ...
-
Manufactured by Purelogic Labsbased in INDIA
that produce less carbon footprint. They take you one step closer to sustainability. Air Quality ...
-
Manufactured by ATEX Explosion Hazards Ltd.based in UNITED KINGDOM
The Atex CO detection system uses advanced carbon monoxide (CO) sensors to detect early stages of powder combustion before a fire or explosion can be ignited. This allows the problem to be resolved either manually or automatically, reducing fire and explosion protection ...
-
Manufactured by Intec Controlsbased in USA
Wall-mounted gas monitor with built-in carbon monoxide (CO) sensor, accepts one analog remote device such as a secondary gas sensor, temperature or humidity ...
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GDA 2525 Carbon Monoxide (CO) gas sensor is a 2 wire 4-20 mA Loop Powered device. It has an electrochemical carbon monoxide sensor unit which is temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
-
Manufactured by Rel-Tek Corporationbased in USA
FireBoss*100 Carbon Monoxide Sensor - All CO sensors are not alike. The FireBoss toxic 0-25-100-500 ppm CO sensor line has been re-designed and enhanced over a period of two decades of underground mining use, and has evolved as a tough, dependable product with exceptionally long-term stability. Others are often ...
-
Manufactured by COFEM SAbased in SPAIN
Algorithmic addressable multisensor for fire detection. The A30XHTCO has three different types of sensors: optical sensor; heat sensor and carbon monoxide sensor (CO) for fire detection system. The use of the CO sensor is very valuable for the early detection for some types of ...
-
Manufactured by City Technology Ltdbased in UNITED KINGDOM
CiTiceLs may exhibit a response to certain gases in a sample other than the target gas. The table below shows the typical response of 3F/D sensors to a number of common cross-interfering gases. The figures are expressed as a percentage of the primary sensitivity (i.e. carbon monoxide = ...
-
Manufactured by Lunar Outpost Inc.based in USA
Range: 0 to 1000 ppm; Max Resolution: 4 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you