Only show results in Connecticut? Ok

cardboard container equipment

  • Semi-Automatic Vertical Balers

    The alternative to balpress is to pay tipping and shipping costs to get rid of the material. A container is no solution considering that in a 16 kbm container maximum space is 400 kg of sanded cardboard that corresponds to 1.5 - 2 kbm ball.

    By INGENJÖRSFIRMA R SJÖSTRAND AB based in Huddinge, SWEDEN. from Balers Product line

  • AGU - Model EPB - Bale Press

    This recycling press was designed for compressing paper, cardboard, foil, sheet metal containers, fruit crates and canisters; it achieves a volume reduction of up to 80 %*!

    By AGU direkt GmbH based in Bad Iburg, GERMANY.

  • Case Inspection System

    The PRO Series Case system from TapTone is designed for non-contact, non-destructive, 100% automatic container inspection through a sealed cardboard and/or shrink wrapped case. The system offers the option of acoustic or proximity technology to inspect glass jars with metal closures or metal cans for pressure or vacuum ...

    By Teledyne TapTone based in North Falmouth,, MASSACHUSETTS (USA). from Leak Sensors Product line

  • UK Waste - Mobile Roll Packer

    The UK Waste Mobile Roll Packer is ideally suited for a multi-container operation on Civic Amenity Sites. It works well with wood, cardboard, garden refuse, general waste and light weight metals and plastics. It gives high compaction values and reduces transportation costs.

    By UK Waste & Recycling Ltd. based in Liverpool, UNITED KINGDOM. from Civic Amenity Sites Product line

  • Drawer Compactor

    The roll-off compactors made by our company are ideal equipment for reducing the volume of any bulky waste to dry fraction (paper, cardboard, plastic, wood, metal containers) allowing considerable savings in transport and cleaning costs in storage areas. They also comply with CE regulations.

    By Carpenteria Carnovali s.r.l based in Prevalle, ITALY. from Compactors and Small Compactors Product line

  • Stationary Ram Compactor

    Open-top containers are dangerous and your workers do this more often than you think. Well suited to dry waste disposal and cardboard recycling.

    By Blue Rhino Industries of America based in Fountain Hills, ARIZONA (USA). from Ram Compactor Product line

  • Recycled Commodities

    Recyclable materials processed at Emterra Environmental’s Material Recovery Facilities (MRFs) are turned into high quality recycle commodities that meet and exceed our buyer specifications, including: Paper (newspaper, mixed paper, fine and office paper, cardboard, boxboard and other various types of paper), Steel, Aluminum, Glass (flint and ...

    By Emterra Group Inc based in Burlington, ONTARIO (CANADA).

  • CombiMax - Model FR - Waste Compactor

    Europress CombiMax FR compactors are equipped with a floating roof solution that enables high filling levels without emptying problems. During the emptying, the roof lifts up releasing the pressure from the container. Now the tight compressed material comes easily out. CombiMax FR suites especially for cardboard and other dry material.

    By Europress Group Oy based in Kerava, FINLAND. from Compactors Product line

  • Plastic Film

    Includes shrink wrap, pallet wrap and other plastic film. Price paid depends on colour and cleanliness. It is important to keep clear shrink wrap and film as clean and dry as possible. Bales should contain only plastic film with no wood, paper or cardboard  and should be stored indoors.

    By Leinster Environmentals based in Haggardstown, Dundalk, IRELAND.

  • Imabe Iberica - Waste Compactors and Self-Compactors

    Waste compactors and self-compactors are equipment designed to process all type of waste (solid urban waste - suw, industrial waste, paper, cardboard, etc.). All materials are compacted and pushed inside the containers in order to reduce the volume and make more efficient the transport operation, because of the density increase gained by the ...

    By IMABE IBERICA S.A. based in Arganda del Rey, SPAIN. from Solid Waste Treatment Sector Product line

  • Hot-Melt Filling Line Press

    This filling line is designed for the filling of hot-melt into both, conical cardboard trays and cylindrical containers. The product is supplied by a pump from a „Z-Blade“ mixer with screw discharge via a heatable pipe connection at a temperature of 120 – 160° Centigrade.

    By Schwerdtel GmbH based in Karlsfeld bei München, GERMANY. from Special Customized Solutions Product line

  • Kontika - Model 50 SE - Channel Baling Presses

    Suited for pressing: paper, cardboard, printing waste, plastics, PET, beverage containers. Feed hopper. Simple photo cell control in the filling chute. Manual wire setting, 3-fold with quick release wires. 4-fold binding available on request. With side bale discharge, hydraulic. Suited for small material traffic. Suited for small storing positions

  • Taskmaster - Model Titan (TM14000) - Efficient Shredder with Patented Design Break-thru

    The Taskmaster Titan (TM14000) packs the capability of shredders employing twice to three times the power and costing thousands more. This unit can reduce such items as packaging, wood, plastics, paper, wastewater, components, bottles and containers, waste materials, electronic components, bulky items, rejects, foodstuff, cardboard boxes, bottles, ...

    By Franklin Miller Inc. based in Livingston, NEW JERSEY (USA). from Solid Waste Shredders Product line

  • Dry Oakum

    A dry, twisted, jute oakum made in rope form without tar or oil. Oakum is sold and shipped in 50/lb. coils in cardboard containers. When fully unwound, a 50/lb. coil will yield approximately 1000 l.f. of ½' diameter rope. The very loose weave allows rapid absorption of PARSON PERMA SEAL in addition to ease of separation for insertion in ...

  • Mobile Compactors

    Our mobile compactors, also called 'self-compacting containers' (SPB) are suitable for compacting of residues and recyclable raw materials. In addition to residual waste and industrial waste, also bulk waste, green waste and contaminated material (hospital waste) as well as films and paper and cardboard packaging are also compacted.

    By Ludden & Mennekes Entsorgungs-Systeme GmbH based in Meppen, GERMANY.

  • Vacu-vials - Refill Ozone Kit

    The Vacu-vials Refill Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, 25 mL sample cup, ampoule blank, and instructions. The kits require the use of a SAM Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell and with a “Z dimension” of 15 mm or less.

    By Pacific Ozone Technology, Inc. based in Benicia, CALIFORNIA (USA). from Ozone Test Kits Product line

  • Ecopolymer - Model ES 10/1-15/2 Series - Universal Shark Shredders

    Universal Shark ES 10/1-15/2shredders are used for processing all kinds of plastics, including solid and elastic materials. The shredders grind production waste, pipes, automotive parts, blow moulded materials such as, for example, PET bottles, PE/PP bottles, containers or buckets as well as paper, cardboard, light metals. Different sizes and ...

    By Ecopolymer based in Kharkiv, UKRAINE. from Shredders Product line

  • Commercial and Industrial Material Recovery

    CP Group’s Commercial and Industrial (C&I) systems are designed to sort waste generated by factories, offices, retail shops, and businesses. C&I material generally consists of office waste, product packaging, production waste, and can include fiber, cardboard (OCC), wood, metals, glass, textiles, food organics, containers, and other ...

    By The CP Group based in San Diego, CALIFORNIA (USA). from Material Recovery Facility Product line

  • Bergmann - Model APB 616 - Alpha Pack Bin for Roll-Off Skip Loaders

    The Alpha-Pack-Bin type APB 616 is a mobile compaction container, which can be transported with the help of roll-off and slip off vehicles. The Bergmann compaction principle compacts cardboard boxes and re-usable materials in an efficient manner. The highest compaction results are thereby achieved through the linear arrangement of the hydraulic ...

    By Bergmann, Heinz, e.Kfm.- Machines for Waste Management based in Lathen/Ems, GERMANY. from Alpha-Pack-Bins Product line

  • WRS - Model SE 10 - Two-Shaft Shredders

    The SE10 model is derived from the SE15 structure and available in 360 and 480 mm lenghts. It is all about a very strong machine in relation with the low power applied, therefore suitable for quiet heavy-duty applications. Some application fields are plastic containers up to 20 liter, trimmings, wodden waste, biomasses, paper, cardboard, ...

    By WRS Italia Srl based in Motta di Livenza (TV), ITALY. from Two-Shaft Shredders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you