Chamber Testing Equipment Near Kazakhstan
-
Manufactured by Orbis BVbased in NETHERLANDS
Excellent performance in Automatic Distillation testing. STARDist includes unique features such as Optical Dry Point testing, PreScan and fast heater cooling. The smart heater control algorithms are designed for high performance. Its automatic performance during the different heat phases (time to IBP, distillation rate, FBP) ensure the ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HB top hat furnace range has an automatically operated vertically moving hood for heat treatment in air. The moving hood design allows samples to be accessed from three sides. The HB can be equipped with CrFeAl heating wires up 1300 °C or with MoSi2 heating elements for temperatures up to 1800 °C. The HB hood furnaces are available with usable volumes of 80 to 514 litres with the ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Some analysis techniques may be affected by alumina or silica dust (Al2O3 at SiO2) - the materials normally used to construct furnace chambers. To avoid this the GSM furnace chamber is constructed from a fused quartz material. This design also offers superior containment of aggressive and corrosive vapours such as sulphuric, ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Created by the Performance Review Institute, the Nadcap programme is designed to provide an accreditation and quality assurance framework for a defined range of ‘special processes and products’ that are used within the Aerospace and Defence sectors. It was originally sponsored by Boeing and is now adopted by all Western aerospace manufacturers. Nadcap is becoming increasingly ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For the economic recovery of xenon from production plants. Special features/Process: Evacuation of the customer's test chamber. Filling of the chamber with xenon. After successful testing inside the chamber, the gas is recovered and stored into cylinders. Permanent monitoring of the gas quality by means of an O2 ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
Visual detection of packaging leaks through either bubble emissions, burst testing or altitude simulation testing. The LeakVIEW is an ideal seal integrity tester for a range of packaging within the food, consumer and medical device ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The MediBLUE automates the industry standard Methylene Blue Dye test, where packaging is submerged into a blue dye solution. The test chamber is then placed under a vacuum that forces air from any openings within the pack. After returning to an ambient pressure, the dye will penetrate and be evident within the pack should any holes be ...
-
Manufactured by Fan Azma Gostar Company (FG)based in IRAN
FG Stability test chamber ZF model is the specialist for reliable stability testing and precise maintenance of constant climatic Conditions. From programming to documentation, it meets all important guidelines, such as ICH, GMP, and GLP. With its high capacity reserves, automatic water and wastewater management, and many options, the FG ZF ...
-
based in UNITED KINGDOM
The Micro-Chamber/Thermal Extractor™ (µ-CTE™) is a versatile and compact unit with up to six small cylindrical chambers that enables the sampling of chemicals released from products or materials. Released volatile and semi-volatile organic compounds (VOCs and SVOCs) are collected onto sorbent tubes for analysis by ...
-
Manufactured by Gasera Ltdbased in FINLAND
Evaporative losses from the fuel system are tested for vehicle certification. GASERA ONE SHED allows direct monitoring of evaporative emissions as part of the qualification testing procedures for vehicles. The GASERA ONE SHED’s photoacoustic technique is approved by the Environmental Protection Agency (EPA) and the California Air ...
-
Manufactured by Thermotron Industriesbased in USA
A Benchtop Environmental Chamber offers flexibility, uniformity, and control accuracy required for cost-effective environmental testing. Ideal for testing smaller products such as computer components, automobile sensors, or cell phones, a Thermotron Benchtop Environmental Chamber combines superior performance in a small, ...
-
Manufactured by Thermotron Industriesbased in USA
Thermotron’s Thermal Shock Chamber is an effective tool in subjecting products to a thermal shock test. Thermal Shock Environmental Chambers have a product carrier basket that automatically transports a product under test between separately controlled temperature zones. With built-in viewing windows, users can easily ...
-
Manufactured by Thermotron Industriesbased in USA
Thermotron’s Automated Corrosion Test Chambers combine the capabilities of a temperature humidity chamber and a salt spray chamber. Corrosion Chambers eliminate the need to manually transfer products from one environmental chamber to ...
-
Manufactured by Thermotron Industriesbased in USA
Designed to simulate a soaking, rainy environment, Thermotron’s Moisture Test Chambers are built with the water-tightness of sealed components such as head lamps, tail lights, and wiring harnesses making them ideal for conducting a water spray test. The Rain Test Chamber features a self-contained water ...
-
Manufactured by Thermotron Industriesbased in USA
Thermotron’s SE-400s are high performance environmental chambers with 385 Liters of workspace. These climate chambers match compressor sizes to your enhanced performance needs. A Thermotron SE-400 environmental chamber may also be equipped with Thermotron’s patented modular humidity system. This system may be added at the ...
-
Manufactured by Thermotron Industriesbased in USA
SE-1400 environmental chambers provide flexibility and versatility required for today’s competitive marketplace. With a workspace of 1,366 Liters and multiple performance configurations, the SE-1400 environmental chamber can meet your unique testing need. Choose from a cascade or single stage refrigeration system with diverse compressor ...
-
Manufactured by Thermotron Industriesbased in USA
The SE-2000 environmental chamber comes in multiple configurations, all with a 1,965 liter workspace. Choose from many optional features that allow you to tailor your testing to your specific testing needs. Thermotron’s SE-2000 environmental chambers provide testing flexibility and versatility for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you