check valve Equipment available in Liechtenstein

Available in Liechtenstein| Near Liechtenstein
1379 Results found

We couldn't find any check valve equipment in Liechtenstein

Here is a list of results available in Liechtenstein

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: check valve ×

  • Available in: Europe ×

  • Available in: Liechtenstein ×

Singer Valve - Model 10 & 12 - Pilot Check Valves

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 10 pilot check valve is standard on all 106 and 206 series valves requiring a pilot check function such as BPC, PR-C, RPS-C types. It is designed to require a low “cracking” differential pressure to open. The 12 has a higher “cracking” pressure and requires more differential pressure to open.

Singer Valve - Model 106/206-HC - Hydraulic Check Valves

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is ...

Singer Valve - Model 106/206-PR-C - Pressure Reducing and Check Valve

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-PR-C and 206-PR-C pressure reducing and check valves are based on the 106-PG or 206-PG main control valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the ...

ProFlex Proco - Model Style 710 - Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO Proflex Style 710 check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal application.

ProFlex Proco - Model Style 730 - Sleeved Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 730 check valve is designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal applications.

ProFlex Proco - Model Style 720 - In-Line Flanged Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex 720 check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available upon request.

Shand & Jurs Biogas - Model 97220 - Back Pressure Check Valve

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97220 Back Pressure Check Valve uses a free swinging 'pendulum' pallet design to provide maximum flow rates with a minimum pressure drop in low pressure gas control lines.

ProFlex Proco - Model Style 740 - Slip-in Style In-Line Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 740 check valve is designed to slip directly into an existing pipe, and is supplied with an expandable clamp to secure it in place.

ProFlex Proco - Model Style 750 - Jacketed In-Line Flanged Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 750 check valve is designed with a full metal enclosure, for easy installation within existing piping systems.

ProFlex Proco - Model Style 770 & 780 - Wafer Style In-Line Rubber Check Valves

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 770 and 780 in-line rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warp or freeze. Quick ...

Zwick - Model Tri-Check Series - Check Valve

by Zwick Armaturen GmbH     based in Ennepetal, GERMANY

The check valve TRI-CHECK combines all the benefits of the Series TRI-CON in a non-return valve. Triple-offset design with a wide seat angle and a true cone in cone, no rubbing while moving and absolute zero leakage performance. Also the statically held gasket and the no pinned disc design are used in the Series TRI-CHECK. The TRI-CHECK is ...

Check Valve

by Lockwood International     based in Houston, TEXAS (USA)

A Check valve is a one-way valve allowing fluid to flow through one opening and leave through the other. The general purpose of this valve is to prevent backflow (flow in the opposite direction). Check valves inherit the term “cracking pressure”. When the cracking pressure is reached, the valve will open. When the pressure drops below ...

AZI - Model RZI - Check Valve

by Adams Armaturen GmbH     based in Herne, GERMANY

The compact design of the RZN check valve even makes it possible to operate in very limited spaces. The valve is robust and long lasting and can also be fitted with soft seals in a metallic seat or strip-metal seals for use at higher temperatures. Based on the same proven design, the RZI was developed for pipe dimensions over 1,000 millimetres. ...

AZI - Model RZN - Check Valve

by Adams Armaturen GmbH     based in Herne, GERMANY

Our RZN and RZI check valves offer proven pump protection for applications with liquid media. The individually adjustable damping system enables the butterfly valve to perform shock-free checking, even in critical areas. Our RZN and RZI butterfly valves feature first-class hydrodynamic characteristics, low pressure losses and the individually ...

Model CLV-50 - Check Valves

by Ayvaz A.S.     based in Hadimköy-Istanbul, TURKEY

Check valves are commonly used armatures that can be applied for liquid, gases and steam applications. Check valves provide the flows just one way. When liquid flows through to flowing direction, check valves open and let it pass. But liquid tries to flow opposite direction of flowing, check valves close and prevent passing.Ayvaz lift check valves ...

Model CV10/P - Check Valves

by Ayvaz A.S.     based in Hadimköy-Istanbul, TURKEY

Check valves are commonly used armatures that can be applied for liquid, gaseous and steam applications. They increase the process safety and can be used instead of complicated armatures. Because of short installation time and installation distance, small dimensions; Ayvaz disco check valve appears to be advantageous.Check valves provide the flows ...

Model 06-2084810/-16- PN 10/16 DN40 - DN300 - Check Valve

by CTV-Armaturen GmbH     based in Nerdlen, GERMANY

Design acc. to DIN EN 12334. Double sided flange connection acc. to DIN EN 1092-2. Face to face dimension acc. to DIN EN 558, Series 48 (F6). Metallic or resilient seated With interior shaft leading through the cover and with outside lever and weight. Low wear and low resistance flap bearing

eko - Model 5000 - Check Valve

by Ekoval Valve Company     based in SINCAN, TURKEY

Body & Bonnet: EN GJL 250 Cast Iron.Stem: Stainless Steel.Disc: Stainless Steel 304.Disc Gasket: EPDM.Inner and outer surface of the valve is powder epoxy coated for all sizes.Resilient Seat application

Val-Matic - Model Dual Disc - Check Valves

by Val-Matic Valve & Manufacturing Corp.     based in Elmhurst, ILLINOIS (USA)

The Dual Disc Check Valve with its compact wafer design and low cost have made it a popular choice when space and price are major factors in valve selection. The compact design features non-slam spring-assisted closing.

Check Valve

by YAKACIK VALF A.S.     based in Kartal, TURKEY

Check valves are safety armatures which prevents the fluid in the line to turn back. The closing element moves on the vertical direction on the sitting surface. They close by the power of spring and register weight It is suggessted to been installed in horizontal position for the types with spring

Need help finding the right suppliers?

Let the XPRTs do the work for you