check valve Equipment available in Micronesia

Available in Micronesia| Near Micronesia
1100 Results found

We couldn't find any check valve equipment in Micronesia

Here is a list of results available in Micronesia

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: check valve ×

  • Available in: Australasia ×

  • Available in: Micronesia ×

Singer Valve - Model 106/206-PR-C - Pressure Reducing and Check Valve

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-PR-C and 206-PR-C pressure reducing and check valves are based on the 106-PG or 206-PG main control valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the ...

Singer Valve - Model 106/206-HC - Hydraulic Check Valves

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is ...

Singer Valve - Model 10 & 12 - Pilot Check Valves

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 10 pilot check valve is standard on all 106 and 206 series valves requiring a pilot check function such as BPC, PR-C, RPS-C types. It is designed to require a low “cracking” differential pressure to open. The 12 has a higher “cracking” pressure and requires more differential pressure to open.

ProFlex Proco - Model Style 730 - Sleeved Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 730 check valve is designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal applications.

ProFlex Proco - Model Style 710 - Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO Proflex Style 710 check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal application.

ProFlex Proco - Model Style 720 - In-Line Flanged Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex 720 check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available upon request.

Shand & Jurs Biogas - Model 97220 - Back Pressure Check Valve

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97220 Back Pressure Check Valve uses a free swinging 'pendulum' pallet design to provide maximum flow rates with a minimum pressure drop in low pressure gas control lines.

ProFlex Proco - Model Style 740 - Slip-in Style In-Line Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 740 check valve is designed to slip directly into an existing pipe, and is supplied with an expandable clamp to secure it in place.

ProFlex Proco - Model Style 750 - Jacketed In-Line Flanged Rubber Check Valve

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 750 check valve is designed with a full metal enclosure, for easy installation within existing piping systems.

ProFlex Proco - Model Style 770 & 780 - Wafer Style In-Line Rubber Check Valves

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The PROCO ProFlex Style 770 and 780 in-line rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warp or freeze. Quick ...

Zwick - Model Tri-Check Series - Check Valve

by Zwick Armaturen GmbH     based in Ennepetal, GERMANY

The check valve TRI-CHECK combines all the benefits of the Series TRI-CON in a non-return valve. Triple-offset design with a wide seat angle and a true cone in cone, no rubbing while moving and absolute zero leakage performance. Also the statically held gasket and the no pinned disc design are used in the Series TRI-CHECK. The TRI-CHECK is ...

Check Valve

by BEL Valves Ltd.     based in St Peters,, UNITED KINGDOM

Pressure surges in oil and gas applications cause problems that can include back-flows leading to contamination of service fluids and potential damage to pipelines, process units and vessels. There is therefore an obvious need to protect systems against this kind of contamination.

Cameron - Model 310 Series - Check Valves

by Cameron     based in Houston, TEXAS (USA)

The 310 Series is a ductile iron, threaded bonnet, full opening, swing check valve. Threaded bonnet construction allows disassembly on the jobsite for easy service and repair. 310 Series check valves are available in sizes 1” to 4” 600psi to 2000psi maximum working pressures in threaded end connections.

Schutte & Koerting - Check Valves

by Schutte & Koerting     based in Trevose, PENNSYLVANIA (USA)

Fig. 828 Check Valves, also referred to as Extraction Check Valves, prevent backflow in steam and water lines to protect valuable equipment from damage. Used in extraction lines from steam turbines to feedwater heaters, heating systems or process equipment, these extraction check valves are engineered for exceptional reliability. Where reverse ...

ÖZKAN - Model Nozzle Type - Check Valve

by ÖZ-KAN Makina Elemanları San. ve Tic. A.Ş.     based in Izmir, TURKEY

Nozzle check valves are one of the best check valve designs in terms of some features ; Fast respond to the flow changes. Very short closing stroke. Low weight moving parts. Non-slam closure. Low head loss.

ÖZKAN - Model Tilting Type - Check Valve

by ÖZ-KAN Makina Elemanları San. ve Tic. A.Ş.     based in Izmir, TURKEY

Short body, small volume and light weight. Shafts protrude on both sides of the body and allow the  lever and counter weight to be mounted on the right or left side, both vertical and horizontal pipe line applications. Disc swings freely. The disc opening depends on the flow velocity. Adjustable weight offers the adaptability to the ...

Model 3116 Series - Check Valve

by Alloy Valves and Control, Inc. (AVCO)     based in Santa Ana, CALIFORNIA (USA)

Size 1'- 10', 1-150 PSI. End Connections NPT, Socket Weld. Valve Materials 316 Stainless Steel.

Model Z15.3 PN 63-500 - Check Valve

by Arako spol. s r.o.     based in Opava, CZECH REPUBLIC

Forged straight-way body, with butt weld ends or weld on flanges, conical seats, non-asbestos gasket.Meets the requirements of PED 97/23/EC directive.Long service life - seats are hard faced with wear resistant and corrosion proof metal or stellite Also suitable for liquids with impurity – conical seats.Customer related solution – ...

Need help finding the right suppliers?

Let the XPRTs do the work for you