check valve Equipment in Austria

  • BHDT - Check Valves

    Check Valves are designed for a pressure range from 20 MPa to 70 MPa especially for conditions in chemical and petrochemical industry. Only forged material is used for high pressure equipment.

    By BHDT GmbH based in Kapfenberg, AUSTRIA. from Fertilizer Product line

  • Krebs Technequip - Ball Check Valve

    The Tech-Taylor Valve is a dual or triplex free ball check valve used to isolate pumps mounted in parallel.

    By FLSmidth KREBS Office in Neusiedl am See, AUSTRIA. from KREBS Technequip Knife Gate Valves Product line

  • WaStop - Stainless Steel Check Valves

    The patented Wastop® inline check valve has been the innovator and industry leader since its inception. Wastop excels at preventing backflow, flooding, and sewage odor spread in pipe networks. It can be inserted into almost any existing pipe. Unlike any other check valve available today, Wastop® can be mounted horizontally, vertically, on ...

    By WaStop International AB Distributor in St. Veit / Glan, AUSTRIA.

  • Inline Check Valve

    The revolutionary patented and certified Wastop® inline check valve can be installed in minutes in a pipeline or chamber. It can be installed either horizontally or vertically and either at an inlet or outlet. WaStop® can be installed to prevent backflow in all cases. Flow in the normal direction causes a slight pressure buildup against ...

    By WaStop International AB Distributor in St. Veit / Glan, AUSTRIA.

  • Ceramic Rotary Valves

    KREISEL Ceramic Rotary Feeders are the latest state of the art rotary feeders. Their highly wearresistant lining with ceramic elements reduces the wear to conventional rotary feeders by amultiple. Depending on requirement profile different wear protection systems (Wear ProtectA-F) are available. Ceramic places with a Mohshardness of 8.5 - 9.0 (for ...

    By KREISEL GmbH & Co. KG Office in Rohrbrunn, AUSTRIA. from Rotary Valves Product line

  • Technequip - Vacuum Breaker Valve

    The T1 Vacuum Breaker Valve is a one-way free ball slurry check valve. It is mounted on the high points in a slurry line to break the vacuum created on pump or power failure.

    By FLSmidth KREBS Office in Neusiedl am See, AUSTRIA. from KREBS Technequip Knife Gate Valves Product line

  • PROTEGO - Model DE/S-IIB - High Velocity Pressure Relief Valve

    The deflagration- and endurance burning-proof PROTEGO DE/S type device is a state of the art high velocity vent valve working on the principle of a dynamic flame arrester. It is primarily used as a safety device for flame transmission proof venting of cargo spaces and loading systems for in land water way barges during the loading process and on ...

    By Braunschweiger Flammenfilter GmbH Office in Wien, AUSTRIA. from Flame Transmission Proof Valve Product line

  • Pressure Safety Valves

    Pneumatic press double drives, also referred to as dual air valves or press safety valves, are used to control the air actuated systems which must always exhaust to a safe position. This valve is designed for self-checking in accordance with OSHA and ANSI. This design with its unique cross flow pattern and air logic monitor is a revolutionary ...

    By IMI Precision Engineering Office in Wiener Neudorf, AUSTRIA.

  • Rockmore - Model ROK 3LT - Low Pressure DTH Hammer

    Standard 2-3/8' API Reg Pin top sub, BR 33 (7 Splines) DTH bit shank, High Performance at Low Pressure, Robust and Reliable Design, Valve Controlled Piston, Solid Piston, No Blow Tube, Check Valve to Guard Against Back-flow of Water and Debris

  • Rockmore - Model ROK 2LT - Low Pressure DTH Hammer

    Standard RD 50-6 Box top sub, BR 2 (6 Splines) DTH Bit Shank, High Performance at Low Pressure, Robust and Reliable Design, Valve Controlled Piston, Solid Piston, No Blow Tube, Check Valve to Guard Against Back-flow of Water and Debris

  • Control Panels

    We offer three-valve, five-valve and custom configured panels. All systems are mounted on brushed stainless steel that are mountable to any suitable surface. Each control panel features an integral check valve in the CGA connection and metal-to-metal diaphragm seal to protect your system from internal contamination during cylinder changeouts. And ...

    By Praxair Technology, Inc Office in ST. PANTALEON, AUSTRIA. from Gas Handling Equipment - Gas Delivery Systems Product line

  • Critical Purity Manifolds

    The modular gas distribution system is a flexible manifold designed for centralized distribution of gases, regardless of facility constraints. Each station has an integral diaphragm valve for shut-off and gas purity protection. The modular design facilitates expansion as gas requirements increase. Each system comes complete with a flexible, all ...

    By Praxair Technology, Inc Office in ST. PANTALEON, AUSTRIA. from Gas Handling Equipment - Gas Delivery Systems Product line

  • Katadyn - Model MF31 - Multifilter

    Filter unit for 31 self-disinfecting filter elements. Made for ceramic filter elements of the type Katadyn no. 4, no. 5, no. 6 or LPK-70-high flow. Filter housing made from stainless steel AISI 304 (Din 1.4301). Thread connection 1 1/4', including check valve. The micro-porous filter elements no. 4 and no. 5 of Katadyn ceramic have a pore size of ...

    By Aquafides Schweiz AG Office in Lenzing, AUSTRIA. from Katadyn Multifilter MF Product line

  • OPTISENS AAM 1050

    In the OPTISENS AAM 1050, free chlorine is measured by a sensor with a three-electrode design, which has very long lifespans, thanks to the patented ASR cleaning system. Measurement takes place in a Plexiglas assembly, which is ideal for visual inspection and can be optionally expanded with pH measurement, in order to guarantee measurement ...

    By Krohne Messtechnik Gmbh & Co. KG Office in Wien, AUSTRIA. from Analysis - Water Product line

  • Premium

    TAPI - Model T201 - Chemiluminescence NH3 Analyzer

    The Model T201 combines a specially configured chemiluminescence analyzer with an external thermal converter to give stable and repeatable NH3 measurements at very low levels. In addition, the T201 provides simultaneous values for NO, NO2, and NOx concentrations. The T201 is ideal for trace ammonia monitoring applications in ambient air as well as ...

    By Teledyne API Distributor in AUSTRIA. from Ambient and Source Gas Monitoring Product line

  • WaStop - Model HD - Heavy Duty Access Chamber Valve

    The WaAccess Chamber is a complete inspection chamber Ø425 with DN110 – 160mm connections.  Inside the chamber is a WaStop check valve to prevent back-flow.  The ‘easy-remove’ check valve makes the chamber easy to rinse.  The check valve can be removed from ground level.  WaAccess Chamber can be ...

    By WaStop International AB Distributor in St. Veit / Glan, AUSTRIA.

  • Premium

    JCT - Model JHPF - Heated Adapter Pipe

    Applications; For extractive gas analysis. For emission and process monitoring. Process external heating of pre-filters for applications with high dust concentrations combined with high process temperatures (above maximum temperature of pre-filter). Combinable with gas sampling probes JES-301 and JES-301L.

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Gas Sampling Probes Product line

  • Katadyn - Model MF7 - Multifilter

    Filter unit for 7 self-disinfecting filter elements. Made for ceramic filter elements of the type Katadyn no. 4, no. 5, no. 6 or LPK-70-high flow. Filter housing made from stainless steel AISI 304 (Din 1.4301). Thread connection 3/4', including check valve. The micro-porous filter elements no. 4 and no. 5 of Katadyn ceramic have a pore size of 0.2 ...

    By Aquafides Schweiz AG Office in Lenzing, AUSTRIA. from Katadyn Multifilter MF Product line

  • Premium

    Model Bredel Series - Hose Pumps

    Flows to 108,000 litre/hour, 16 bar. Double pump uptime in tough fluid handling duties. Suction lift to 30 feet, dry running and reversible. Eliminate ancillary equipment.

    By Watson-Marlow Fluid Technology Group Office in Wien, AUSTRIA. from Bredel Hose Pumps and Elements Product line

  • Model 5028B - High Purity Automatic Changeover System

    The brass 5028B and stainless steel 5028S Series high purity automatic changeover systems are designed to provide a continuous supply of high purity gases to your lab, processes and instruments. Typically the 5028 Series systems are used with one cylinder per side and because of pressure differential considerations, feature a line regulator.

    By Praxair Technology, Inc Office in ST. PANTALEON, AUSTRIA. from Gas Handling Equipment - Gas Delivery Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you