check valve Equipment in Spain

  • Model RT - Check Valve

    The RT model FCA check valve is a metal seated non return valve, with single disc and cast monoblock body. The level of tightness is high. The seat is integrated in the disc and is oblique, due to this fact allows an easy closing. Additionally, an auxiliary spring can be assembled in order to improve the closing. It is wafer type to be installed ...

    By FCA - Aplicaciones Para Control De Fluidos S.L. based in Ibarra, SPAIN. from Check Valves Product line

  • Check Valves

    Válvula de RetenciónOur check valves cover all different designers required for each service conditions. Check valves can be bolted bonnet, pressure seal bonnet or threaded in bonnet design.

    By Ringo Valvulas based in Zaragoza, SPAIN.

  • Check Valves

    Our check valves design covers all the valve types, as per customer request. We can manufacture the valves with bolted bonnet or pressure-seal design, in order to cover high pressure applications, or  threaded bonnet for small valves.

    By Vector & Wellheads Engineering S.L. based in Utebo(Zaragoza), SPAIN. from Other Valves Product line

  • Alloy - Check Valves

    Materials: as a valve stockist, we keep duplex, super duplex, alloy 20, monel alloy 400, hastelloy, inconel alloy 600 and incoloy alloy 800, high-tensile strength titanium and tantalum valves in stock, as well as heat resitant 6 Moly, 254 SMO, corrosion resistant 904L, zirconium and uranus valves and can also offer them on manufactuing lead times.

    By The Alloy Valve Stockist based in Barcelona, SPAIN.

  • Check Valves

    Check valves are normally used in systems involving rapid and frequent flow reversals, pulsation or when excessively turbulent flow should be avoided. Check valves are used to prevent flow reversal in piping systems. They are suitable for horizontal or vertical (up flow through valve only) piping runs.

    By Ampo Poyam Valves based in Idiazabal, SPAIN.

  • TECVAL - Model VR-01 - Poppet Check Valve (FxF)

    TECVAL VR-01 poppet check valves are designed to work with liquids under both high pressure and temperature service. They open at a fixed low pressure and close immediately the moment the flow reverses. They are commonly used in chemical plants, water treatment plants, refineries, laboratories and power stations, as well as in general industry.

    By TECVAL, S.L. based in VACARISSES, SPAIN. from Check Valves Product line

  • Irua - Tilting Check Valve

    Valve allows for one directional flow and prevents the return flow of the liquid to its source

    By Irua Tech Industries, S.L. based in GALDAKAO, SPAIN. from Check Valves Product line

  • Class - Model VR150BC - 150 - Bolted Cover Check Valves

    Sizes 2'' to 36''. BODY: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Special Alloys. Other materials under request. TRIM: 316, 410, MONEL. Other materials under request.

    By JC Fábrica de Válvulas S.A. based in Sant Boi de Llobregat, SPAIN. from Check Valves Product line

  • Model BVP-08-94B - Ball Check Valve

    Proinval ball check valves BVP-08-94B are design to satisfy needs in various fields such as waste water, sticky fluids, raising water, etc.

    By Proinval based in Móstoles, SPAIN. from Check Valves Product line

  • Class - Model VR300BC - 300 - Bolted Cover Check Valve

    Sizes 2'' to 20''. BODY: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Special Alloys,. Other materials under request TRIM: 316, 410, MONEL, Other materials under request

    By JC Fábrica de Válvulas S.A. based in Sant Boi de Llobregat, SPAIN. from Check Valves Product line

  • Model 170 - Disc Check Valve

    Disc check valve with centering ring lor placing between llanges in accordance with DIN, UNE, ANSI, BS, etc. norms. DN-15to 100 (DN-125 to 200 see catalogue lor Model 172). For liquids, gases and steam. For use In hydraulic, pneumatic, heating and steam systems, chemical and food industries, eta In accordance with the requirements ol directive ...

    By VYC Industrial, s.a. based in Terrassa, SPAIN. from Check Valves Product line

  • Irua - Axial Flow Check Valve

    Silent check valves designed to prevent reverse flow automatically. The valve shall open when upstream pressure exceeds downstream pressure by 0,2 bar approx. An internal spring shall close the valve just prior to equalizing of pressure on both sides of the plug providing a quiet and non-slamming valve closure. Figure 288 check valve is the ideal ...

    By Irua Tech Industries, S.L. based in GALDAKAO, SPAIN. from Check Valves Product line

  • Model 3141N - Ball Check Valve

    Ball Check Valves PN 16.Threaded end connections BSPP Main parts material description:.Body and cover: Cast Iron / ball: Cast Iron, NBR or EPDM coated .Seals: NBR or EPDM.Other Styles: with inner strainer, coated bodies.

    By Comeval based in El Puig (Valencia), SPAIN. from Check Valves Product line

  • Irua - Swing Check Valves

    To avoid slam is essential that the counterweight closes the valve before a flow reversal occurs. That Slam is what causes the “Water Hammer” in piping systems.The cushion cylinder cannot retard the valve closure and will minimize the slamming tendency when the valve closes too quickly due to its ...

    By Irua Tech Industries, S.L. based in GALDAKAO, SPAIN. from Check Valves Product line

  • Model 172 - Disc Check Valve

    Disc check valve with centering ring for placing between flanges in accordance with DIN, UNE, ANSI, BS, etc. norms. DN-125to200 (DN-15to 100 see catalogue for Model 170). For liquids, gases and steam. For use in hydraulic, pneumatic, heating and steam systems, chemical and food industries, etc. In accordance with the requirements of directive ...

    By VYC Industrial, s.a. based in Terrassa, SPAIN. from Check Valves Product line

  • Swing Check Valve

    DN: 50-400. PN: 10/16. Ends: Flanged. Body: GG-25. Bonnet: GG-25. Swing: GG-25. Wedge: Neoprene. Bolting: Steel 6.8.

    By Belgicast based in Mungia, SPAIN. from Check Valves and Strainers Product line

  • Globe Stop-Check Valves

    This kind of valve is used generally as a globe valve, with the function of open or close the flow inside a piping system, but it will automatically shut if there is a lost of pressure in the line, preventing from a back flow that would possibly cause damage to equipment, such as boilers or pumps.

    By Babcock Valves S.A. based in Ortuella, SPAIN. from Stop-Check Valves Product line

  • Model C - Dual Plate Check Valves

    Manufacturing range from DN40 to DN1200, and valid for maximum working pressure up to 250 bar. Our Dual Plate Check Valves can be produced in cast iron, stainless steel, carbon steel, and also in Duplex and Superduplex for special applications.

    By Belgicast based in Mungia, SPAIN. from Check Valves and Strainers Product line

  • Axial Disc Check Valves

    Applications Pumping stations.Water treatment and supply.Networks for clean water distribution, irrigation (filtered water).Fire protection networks.

    By Castflow Valves SL based in Humanes, SPAIN.

  • Retention - Model AG1-R - Disc Check Valve

    Disc check valve, flange type for mounting between flanges to EN 1092-2, with resilient seal and double eccentric locking system with external counterweight or counterbalance interior and internal stops. Nominal sizes from DN-200 mm (8 ') to DN-1500 mm (58'). Pressure range PN-10/16/25. Designed for installation between spool flanges and mounting ...

    By Angodos S.L. based in Fuenlabrada, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you