Chemically Resistant Membrane Equipment
-
Manufactured by Sterlitech Corporationbased in USA
Sterlitech offers membranes that exhibit high resistance under chemically harsh ...
-
Manufactured by Berghof Membranes Technology (BMT)based in NETHERLANDS
History has shown that cleaning wastewater streams with chemicals that contain high pH values achieves the best results. A major disadvantage is that many membranes are not robust enough to withstand the highly concentrated alkaline detergents, resulting in wear and tear of the membrane and degradation of the membrane’s ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Fib-R-Thane is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. Fib- R-Thane is used as a chemical-resistant membrane or gasket seal for the protection of concrete, block and steel. Available in two formulations, Fib-RThane No. 88T is applied by trowel, while No. 88S is the sprayable ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Manhole ChimneySeal F-88 is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. ChimneySeal is used as a chemical-resistant membrane or gasket seal for the prevention of water ...
-
PremiumManufactured by ENVICON GmbHbased in GERMANY
Ceramic diffusers are used mainly for continuous aeration in industrial plants where there are problems with the chemical resistance of membrane materials or for ozonation of drinking water plants. ENVICON ceramic diffusers are characterized by their high mechanical strength and good chemical resistance ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Spiral-wound type RO/NF membrane elements produced by PHILOS can be applied to various fields including general water treatment desalination and separation, as well as heat and chemical resistance. RO/NF membranes are mainly used for desalination in the field of pure water, and are particularly effective in separation, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
construction. Downtime will be reduced. (At 70° to 80°F, full operation can be resumed in 24-30 hours, depending on application). The acidproof concrete system typically incorporates an impervious, chemical-resistant membrane such as Sauereisen High Temperature Membrane ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Polymer Concrete - 54 SG - Structural Grade is a potassium silicate castable refractory for chemical resistant construction of sumps, dikes, containment pads, trenches, walls and other structural support columns or bases. Since 54 SG is fast-setting and strong, it eliminates the requirement for a Portland cement foundation in ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Acidproof Concrete 54 - with almost a half century of successful, varied service - is the original acid-resistant material for gunite construction. For those applications that require a lower K factor, lightweight materials, or higher temperature resistance, 54LW is available. 54 Gunite is potassium silicate, acid-resistant ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Ceramic membrane is a separation membrane that can be used in harsh chemical and high-temperature environments. This ceramic membrane produced demonstrates high selectivity and permeability, with pore sizes ranging from nanometers to microns. ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Chemical-Resistant Castable No. 35SG is a hydraulically-setting, calcium aluminate cement. No. 35SG is recommended for protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies. No. 35SG can eliminate costly firebrick or tile linings and is equally ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Chemical-Resistant Castable No. 35 is a gunitable, hydraulicallysetting, calcium aluminate cement. No. 35 is recommended for protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies. No. 35 can eliminate costly firebrick or tile linings and is ...
-
Distributed by EnviroMetbased in USA
The ENPAC Snap-Foam Berm allows for one-time set up and then continual drive in and drive out without ever having to set down the end sidewalls. The Foam Sidewall system consists of (PE) Polyethylene Foam encased in a fuel/chemical resistant membrane cover. The end sidewall design incorporates high strength connectors and a ...
-
Manufactured by WaterQbased in NETHERLANDS
The FlatQ is an microfiltration membrane with an assymetrical pore structure of 0,1 micron, manufactured from PVDF, with a high chemical resistance. The membrane has a pore structure that guarantees good permeate quality and high productivity. Its smooth surface ensures low filtration reluctance and an excellent anti-pollution ...
-
Manufactured by Kinesis Inc - Cole-Parmer Instrument Companybased in UNITED KINGDOM
KX Regenerated Cellulose Syringe Filters are ideal for filtering organic solvents due to their strong chemical resistance. The regenerated cellulose membrane can be used with organic and aqueous solvent systems. KX Regenerated Cellulose Syringe Filters are available in a range of diameters from 13 to 30mm and 0.22 and 0.45µm ...
-
Manufactured by Mantec Filtrationbased in UNITED KINGDOM
Mantec’s ceramic diffusers are used mainly for applications where continuous aeration is required by the process. They are installed in industrial plants where there are problems with the chemical resistance of membrane materials or for ozonation of drinking water plants. Ceramic diffusers are characterised by their high mechanical ...
-
Manufactured by Tecnicomar S.r.l.based in ITALY
and chlorine from the water, with high and low pressure control, flowmeter, pressure regulator, pump for osmotic counterbalance and chemical resistant semipermeable membranes. The display of the control panel shows the quality of the produced water in terms of conductivity. ...
-
Manufactured by ModuTank Inc.based in USA
or emergency storage and remediation. By design, modular containment systems (i.e. above ground impoundments) are easily configured for irregular sites, quickly bolted together for use, and can be later dismantled for relocation or storage. The systems are equipped with chemical resistant flexible membrane liners for handling and treatment of ...
-
Manufactured by Cytivabased in USA
Nuclepore track-etched polycarbonate membranes are manufactured from high-quality polycarbonate film and have sharply defined pore sizes, high flow rates, and excellent chemical and thermal resistance. The membranes have a smooth flat surface and exhibit very low levels of ...
-
Manufactured by Brother Filtration Equipment CO.,Ltdbased in CHINA
Housings is Fiberglass (FRP), which has very strong chemical resistance. Brother Filtration offer membrane housing in 2.5", 4" and 8" diameter. The membrane vessels aims to replace Pentair Codeline and PROTECT series. Please select suitable vessels according to below order & specification ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you