Chlorine Gas Monitoring Equipment
-
Manufactured by BELIMObased in SWITZERLAND
Factory calibrated; electro-chemical sensor; expected life 1-3 ...
-
Manufactured by Aaru Engineersbased in INDIA
AARU Engineers now offer a Chlorine Gas Detector System with long life Electrochemical sensor capable of continuously Measuring and Monitoring chlorine gas In process streams And Ambient ...
-
Manufactured by Kuntze Instruments GmbHbased in GERMANY
The GAS sensor is a amperometric sensor for measuring Chlorine ...
-
Manufactured by Controlmatik ABW d.o.o.based in SLOVENIA
The M 2103 C series Controlmatik ABW measuring probe for chlorine gas is designed to measure and indicate chlorine concentrations in the air. The probe is mounted in an IP 65 housing and is connected via connector to the amplifying electronics, which is also mounted in the IP 65 housing. Sensor is, with two-wire current loop, connected to the ...
-
Manufactured by Sterling Hydrotech Ltdbased in UNITED KINGDOM
Did you know your plant room could be subject to chlorine gas, a potentially fatal and extremely harmful gas? Are you and your staff protected from a chlorine gas incident? This is where the GMS plus gas detection system comes in. This flexible multi-function device warns the operating personnel ...
-
Manufactured by Controlmatik ABW d.o.o.based in SLOVENIA
The M 4510 series Controlmatik ABW detection unit is assembled as separate signal evaluation unit with display, limiter unit with two adjustable alarms and unit fault alarm, power supply unit and separate detection cell - ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The ChlorineTrak 760S has been specifically designed to perform as an accurate and cost-effective mass flow measurement solution for chlorine injection processes found in typical waste-water treatment applications. Given the corrosive nature of chlorine gas (particularly in the presence of moisture), extremely expensive Hastelloy was ...
-
Manufactured by Clordisys Solutions, Incbased in USA
The Minidox-M is a chlorine dioxide gas generation system designed for use in any pharmaceutical, manufacturing, laboratory, or research setting. The Minidox-M provides a rapid and highly effective method to sterilize volumes up to 70,000 ft3, including rooms, isolators (sterility test, filling line, containment, etc.), passthroughs, ...
-
Manufactured by Clordisys Solutions, Incbased in USA
The Steridox-VP is a chlorine dioxide gas sterilizer designed for use in any pharmaceutical, manufacturing, laboratory, research or surgical setting. The Steridox-VP provides a rapid and highly effective method to sterilize medical devices, sterile products, instruments, and components at ambient temperatures. It utilizes a rugged ...
-
Manufactured by Rel-Tek Corporationbased in USA
ToxiBoss is a wall mounted gas sensor with interchangeable sensing heads to cover a wide variety of toxic gas situations. It is approved intrinsically safe for hydrogen (Group B) environments. Its Class I, Div 1 and 2, Group BCD approval means that it may be used in any hazardous gas environment, except acetylene. And, being intrinsically ...
-
Manufactured by Clordisys Solutions, Incbased in USA
The Megadox is a chlorine dioxide gas generation system designed for use in any pharmaceutical, manufacturing, laboratory, or research setting. It provides a rapid and highly effective method to decontaminate large volume areas up to 560,000 ft3, including rooms, isolators (sterility test, filling line, containment, etc.), passthroughs, ...
-
Manufactured by Clordisys Solutions, Incbased in USA
The Steridox-100 is a chlorine dioxide gas sterilizer designed for use in any pharmaceutical, Medical Device manufacturing, laboratory, or research setting. The Steridox-100 is a single pallet vacuum sterilizer which provides a rapid and highly effective method to sterilize medical devices, sterile products, instruments, and components at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you