CO Gas Analyzer Equipment
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air. The Model 48i is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument ...
-
Manufactured by Vasthi Instruments Pvt.Ltdbased in INDIA
Ambient CO Gas Analyzer uses Non-Dispersive infrared gas filter correlation technology, combined with the most advanced microprocessor technology provides accurate, reliable CO ppm level detected, suitable for application of atmospheric monitoring ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Gasboard-2101 is a CO gas bench with Cubic-Ruiyi patented micro flow NDIR technology, which comes from the Gasboard-2000 series with the same advantage but only focuses on low concentration CO ...
-
Manufactured by Aquas Inc.based in TAIWAN
The Carbon Monoxide Gas Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost-saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. CO Gas Analyzer in a robust IP68 proof enclosure, 1500 N tensile strength Kelvar ...
-
Manufactured by APT Srlbased in ITALY
The Oxygen, or O2 + CO, flue gas analyzer ATEX Zone 1 certified. The ZR instrument can measure the excess of combustion air in flue gas when either liquid, gaseous and solid fuels are used. Analyzer certified for use in hazardous area 1 II GD Ex dII CT6 / T5 / T3. Patented flame arrestor are used for IN-SITU ...
-
Manufactured by AP2Ebased in FRANCE
The ProCeas® CO is a complete pre-calibrated laser infrared spectrometer for rapid real-time measurement of CO for safety ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The catalytic gas purifier also removes hydrocarbons and CO from the treated zero gas. This gas free of HC and CO is suitable as process and carrier gas for gas chromatographs and to produce calibration gas for CO/HC ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
NDL4 is the fourth generation of NILU data loggers and the accumulation of 35 years of experience in data logger development. NDL4 communicates digitally with the analyzer which makes it possible to collect both measurement data and status parameters. The status parameters give important information about the condition of the analyzer, such as ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Our instruments can make range from ppm to % of carbon monoxide measurement according to your applications . Portable model to Online model ,extractive and In-situ installation methods. Highly accurate and reliable, as well as easy to use with intuitive menus and LCD displays. With a wide range of customizations available, our systems can be tailored to fit any application and environment. Our ...
-
Manufactured by Nova Analytical Systems Inc. - part of the Tenova Groupbased in USA
The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4 ...
-
Manufactured by TRACE-GAS - brand by KNESTEL Technologie & Elektronik GmbHbased in GERMANY
The TRACE-GAS LAS CO Analyzer combines reliability, fast response and easy handling in one instrument. Developed for a calibration-free and direct measurement of carbon monoxide ...
-
Manufactured by Bridge Analyzers, Inc.based in USA
For years, CO and HC measurements have been used for performance tuning. The Bridge 2 gas analyzer is differentiated by its use of modern infrared sensors and an integrated microprocessor. This full featured 2 gas analyzer (CO & HC) offers unparalleled convenience of a handheld unit with the ...
-
Manufactured by TRACE-GAS - brand by KNESTEL Technologie & Elektronik GmbHbased in GERMANY
The TRACE-GAS NDIR CO Analyzer – Quick and continuous measurement up to high concentrations. Cost-optimized and long-term stable. The analyzer combines our non-dispersive infrared sensor with housing, pump, filter, power supply, analog output and HMI to an out of the box solution for your analyzing needs. ...
-
Manufactured by JXCTbased in CHINA
Gas analyzer is a gas sensor independently developed by Jingxun Unimpeded using different detection principles for multi-gas detection. The gas detector adopts microcomputer analysis, which can detect the concentration of NOx, SO2, CO2, CO, O3 and O2. Gas ...
-
Manufactured by JES Elektrotechnik GmbHbased in AUSTRIA
Visibility and gas monitoring are used to control the tunnel ventilation at normal operation. If and with how much power artificial ventilation by jet fans is operated depends on the measured visibility. The extractive monitoring system extracts air from the tunnel through an intake system and feeds it into the visibility sensor and gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you