CO sensor Equipment | Environmental XPRT

Premium

IMR - Model 1400CO - 2x CO-Sensors - Flue Gas Analyzer For The Professional

Measures: O2, CO-low (in ppm), CO-high (in %), draft/pressure; soot; Flue-gas and ambient temperature. Calculates:CO2, combustion efficiency, heat losses, excess air, CO corrected. Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, Automatic CO-bypass-switch, serial ...

By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA). from Portable Gas Analyzers Product line

Ulpsm - Model CO V2 - CO Sensor

The ULPSM-CO V2 is a small form factor, ultra-low power CO sensor that produces a linear voltage output proportional to CO concentration from 0 to 500 ppm. This CO module combines the novel millimeter thin electrochemical sensor technology from SPEC Sensors, Inc. with an ...

By KWJ Engineering, Inc. based in Newark, CALIFORNIA (USA). from OEM Products Product line

Analox - Model CO Clear and ACG+ - Replacement CO Sensor

This product (replacement CO sensor) is a spare for the CO Clear carbon monoxide monitor and ACG+ compressed breathing air ...

By Analox Sensor Technology based in Stokesley, UNITED KINGDOM. from Scuba Diving Spares and Accessories Product line

PolyGard® 2 Master Sensor - Carbon Monoxide CO Sensor

PolyGard®-II Gassensor consist of: PolyGard®-II Sensorboard, 24VDC Basic sensor board for connecting a sensor-cartridge Series SC-11XX, without analog output, Plastic Housing 94*130*57mm IP65 PolyGard®-II Sensor Cartridge-A CO-Carbon monoxide:0-300 ppm (electrochemical sensor), M25 plastic housing ...

By MSR Electronic GmbH based in Pocking, GERMANY.

Winsen - Model ME2-CO-D14x50-C - Carbon Monoxide Sensor/CO Sensor

ME2-CO-Ф14x15-C electrochemical sensor detect gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target ...

By Zhengzhou Winsen Electronics Technology Co., Ltd. based in Zhengzhou, CHINA. from Gas Sensor - CO Sensor Product line

ECO-Sure (2e) CO Sensor

The ECO-Sure (2e) gas detection sensor is a high quality, cost effective 2-electrode electromechanical cell designed for the detection of Carbon Monoxide CO in a range of applications but particularly for domestic Carbon Monoxide detection and industrial fire detection applications. The ECO-Sure (2e) is a ...

By Euro-Gas Management Services Ltd based in Churston Ferrers, UNITED KINGDOM. from Gas Sensor Range Product line

AMC - Model 1222 - Combination CO/NO2 Sensor Module

Diesel exhaust has historically been difficult to monitor. The AMC- 1222 mixed fuel exhaust module uses an intricate sensing design to provide a highly effective solution for vehicle exhaust monitoring. The AMC-1222 puts Armstrong's unique interactive Comfort Zone Technology to work as a cost effective and practical solution for ventilation control in diesel and mixed fuel ...

By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA). from Sensors & Transmitters Product line

SenSic - Model 225C - CO/O2 Flue Gas Sensor

The SenSiC CO/02 flue gas sensor detects the relation between the CO (carbon monoxide) and O2 (oxygen) contents in the flue gas and thereby offers better combustion efficiency and emission levels than the lambdasensor. Until now CO sensors have been unaffordable for small to medium size heaters and boilers. The ...

By SenSic AB based in KISTA, SWEDEN.

Analizzatori Chemist - Model 500 - O2, CO Analyzer with 2 Sensors

2 sensors (O2, CO). Not expandable . Integrated printer . No dilution pump for CO . Not suitable for tightness test UNI 7129/11137. ...

By SEITRON S.p.A. based in Casoni di Mussolente (VI), ITALY. from Flue Gas Analyzers Product line

SenSic - Model 150C - CO/O2 Flue Gas Sensor

The SenSiC CO/02 flue gas sensor detects the relation between the CO (carbon monoxide) and O2 (oxygen) contents in the flue gas and thereby offers better combustion efficiency and emission levels than the lambdasensor. Until now CO sensors have been unaffordable for household heaters/boilers. The ...

By SenSic AB based in KISTA, SWEDEN.

Numens - Model 400-003 - EN and UL approved 12/24V 4-Wire carbon monoxide CO gas sensor from chinese manufacture

with the 620-001detector monitor module.]. Advanced electronics in conjunction with a semiconductor gas sensor provide early detection of carbon monoxide gas and high immunity against unwanted alarms. The 400-003 CO alarm range provides fire detection and alarm system designers with a Standards-compliant, economical ...

By Ambest Electronics (Ningbo) Co Ltd based in Yinzhou district Ningbo, CHINA.

Premium

IMR - Model 1440FL/COFL - Exhaust Gas Analysis for Forklift Trucks

sensor. The IMR 1440COFL is equipped with two CO sensors. One CO sensor operates in the low range and another CO sensor operates in the high ...

By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA). from Portable Gas Analyzers - Exhaust Product line

Premium

IMR - Model 1400–FO - Combustion Gas Analyzer

The combustion gas analyzer IMR 1400 FO is easy to use, compact and rugged. One CO-sensor is installed for high CO-measurements. This helps to get the best possible accuracy for different applications (e.g. wood fired applications or ...

By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA). from Portable Gas Analyzers Product line

SENTEC - Model SEM223 - SEM223 wall mounted carbon monoxide CO transmitter temperature & humidity sensor

SPECIFICATIONS Measuring range CO2 concentration: 0~5000ppm Response time ≤10s (1m/s wind speed) Signal output Analog signal: 4~20mA, 0~5VDC, 0~10VDC Digital signal: RS485 output (Modbus protocol) Warm-up time 2min (available), 10min (maximum accuracy) Working voltage 10~30VDC Note: 0~10VDC output (limited to 24VDC power supply) Digital output Device address: 1~255 can be set, the ...

By CHENGDU SENTEC TECHOLOGY CO.,LTD based in CHINA.

Premium

ACME - Model CEW-LS Series - Multiset Gas Detection & Control System

The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor-transmitters is accomplished through a 900 MHz or 2.4 ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - Wireless Gas Detection Networks Product line

Premium

ACME - Model CEW-4 Series - Multi-Gas Wireless Detection and Control Systems

The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - Wireless Gas Detection Networks Product line

Premium

ACME QuadSet - Model CEL-4 Series - Multi-Gas Detection and Control System

The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication network. The LCD ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - RS-485 Gas Detection Networks Product line

Premium

Statox - Model Statox 505: SIL 2 Compliant - Toxic Gas Detector

You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard. Intelligent Gas Sensors for AsH3, Cl2, ClO2, CO, COCl2, H2, H2S, HCl, HCN, HF, N2H4, NH3, NO2, O2, O3, PH3 and SO2. The Statox 505 new 4 – 20 mA Transmitter for toxic gases and oxygen features ...

By Compur Monitors GmbH & Co. KG based in München, GERMANY. from Stationary Gas Detectors Product line

Premium

ACME - Model MGMS - Gas Detection & Control System Module

Scalable system using remote Hardwired Sensors communicating with a central Control Panel as well as Remote Relay Modules to operate ventilation equipment & Remote ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - Wireless Gas Detection Networks Product line

Premium

IMR - Model 2000/2800P - 4-8 Cell Flue Gas Analyzer For Industrial App

The IMR 2800 P is a portable, continuous measuring flue gas analysis instrument housed in an aluminum case. It measures flue gas temperature, air temperature, Oxygen O2, Carbon monoxide CO, Nitric Oxide NO and Sulfur Dioxide SO2. It can optionally measure Nitrogen Dioxide NO2, Sulfur Dioxide SO2, Hydrogen ...

By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA). from Portable Gas Analyzers Product line

Subscribe to our eBulletins