coalescer Equipment in Australasia

  • Oil & Solids Separators - Small Packaged Units

    Efficient Removal of “Free” Oil & Grease, Suspended Solids, Dust etc. Tough and compact. Modular plate pack. Specific design to prevent blocking. Various sizes and configurations. ‘Approved’ by most Australian Authorities. First Flush, storm by-pass configurations. Complete package systems, including Pumps, Level ...

    By Baldwin Industrial Systems Pty Ltd. (BIS) based in Cardiff, AUSTRALIA. from Coalescing Plate Separators (CPS) Product line

  • Oil & Solids Separators - Large Designed Systems

    System performance is simulated through the use of a proprietary computer program. This enables the effluent quality to be accurately predicted which means that we can meet discharge limits 100% of the time – GUARANTEED!

    By Baldwin Industrial Systems Pty Ltd. (BIS) based in Cardiff, AUSTRALIA. from Coalescing Plate Separators (CPS) Product line

  • Custom Scrubber Elements

    Filter change out differential: 10'-15' in H2O over initial delta P. Pleated filter media. Optimal surface area to flow ratio. Wide range of operation flows. Flat gaskets provide for optimal sealing surface. Electronically continuity throughout filter element. Reinforced steal core capable of withstanding 15 PSID.

    By Solberg Manufacturing, Inc. Office in Launching Place, AUSTRALIA. from Coalescing Air/Oil Separator Elements Product line

  • Model K-AGF-PV-30-A - Sample Gas Coalescing Filter

    The removal of aerosols from sample gas streams is a requirement in many applications. To meet this need, the Buhler Model K-AGF-PV-30-Afilter makes use of a coalescing element made of borosilicate fibers. The gas stream passes through the element from inside to outside. The aerosols are caught in the matrix forming steadily growing droplets which ...

    By Bühler Technologies GmbH Distributor in AUSTRALIA. from Gas Analysis - Sample Gas Filters Product line

  • Avenger - Model 91 - Particulate & Coalescing Filter

    Need analyser protection with a vengeance? Introducing the Avenger 90 Series filters: protecting your gas or hydrocarbon liquid analyser and rescuing sample integrity from contaminants with their super powered element. The Avenger Model 91 uses a disposable filter element to remove 100% of micron and sub-micron particulate suspended in a gas or ...

    By a1-cbiss Distributor in CURRUMBIN, AUSTRALIA. from Sample Filtration & Extraction Product line

  • Premium

    AirGen - Model ZA FID Air - Hydrocarbon Free Air Generator

    The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can filter up to 15 L/min of compressed Air and can withstand a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Generators Product line

  • Marine Goe

    Especially designed for marine and boating. General cleaning and odour elimination for ships quarters, galleys, toilets, mess, waste systems, walkways and engine rooms. This reduces the need for many flammable and caustic based chemicals. It has major benefits in bilge operations and oily water systems. Used as directed, MARINE GOE has proven to ...

    By GOE based in O`Connor, AUSTRALASIA.

  • Premium

    Purolite - Model OL100 - Removal of Oil from Condensate

    Purolite OL100 is a premium grade oleophilic resin which acts as a coalescing agent designed for the removal of oil from condensate. This specially treated ion exchange resin is a copolymer of styrene and divinylbenzene which has a high capacity for oil removal and excellent kinetics. Purolite OL100 has very good mechanical strength with bead ...

    By Purolite Corporation Office in Baulkham Hills, AUSTRALIA. from Strong Acid Cation Gel Product line

  • LiquiSep - Liquid Separation Technology

    LiquiSep technology has been implemented specifically to help separate emulsions that are not separable by conventional coalescers. Conventional coalescers are unable to provide the degree clarity associated with LiquiSep technology due to the inability to capture and remove the most penetrating droplets that cause carry-over. LiquiSep can ...

    By Pentair Filtration Solutions, LLC Office in Dandenong South, AUSTRALIA.

  • Model AK 20 V, 11 LD Spec, 165 SS and 167 T - Pre-Coolers

    In applications with entrained liquid droplets or high vapor content in the sample gas stream, the installation of additional condensate separators upstream of the final cooler may be useful. In some applications, these separators may be an appropriate alternative to a gas cooler either as stand-alone units or in combination with a coalescing ...

    By Bühler Technologies GmbH Distributor in AUSTRALIA. from Gas Analysis - Sample Gas Coolers Product line

  • Premium

    Frac Water Reuse Technologies

    Over the last ten years, the US energy sector has accelerated the development of its unconventional oil and gas resources through increased use of horizontal drilling and hydraulic fracturing practices. Water is an essential element in the fracturing process.  The volume of water required to fracture a well varies across the country, but it ...

    By Anguil Environmental Systems, Inc. Distributor in Unanderra, AUSTRALIA. from Frac Water Equipment Product line

  • Oily Water Separators

    Ludowici Water provide a comprehensive range and expert advice on Oily Water Separators. SmartWater Approval for use in Australia. Ludowici Waterʼs range of oily water separators (coalescing plate separators) are designed to remove free oil hydrocarbons from contaminated oily water to produce water quality of an acceptable standard for ...

    By Ludowici Water Pty Ltd based in Carole Park, AUSTRALIA. from Water Treatment Products Product line

  • Model K-AGF-VA-23 - Sample Gas Filter

    The removal of aerosols from sample gas streams is a requirement in many applications. To meet this need, the Buhler Model K-AGF-VA-23 filter makes use of a coalescing element made of borosilicate fibers. The gas stream passes through the element from inside to outside. The aerosols are caught in the matrix forming steadily growing droplets which ...

    By Bühler Technologies GmbH Distributor in AUSTRALIA. from Gas Analysis - Sample Gas Filters Product line

  • Gas Conditioning Equipment

    Gasco designs, fabricates, installs, commissions and services an extensive range of Process Skids for Gas Conditioning and Oil Treatment including: Filter & Filter/Coalescer Skids, Flow Metering Skids, Custody Transfer Metering, Gas Heating: gas fired, electric heating, Heat Exchangers, Pressure Control Skids, Emergency Shut Down Valves ...

    By Gasco Pty Ltd. based in Bayswater, AUSTRALIA.

  • MiniGASS - Model 1228W - Wall Mount Gas Sampling System

    MG-1228W Wall Wall mounted Mini-GASS system incorporates all the features of the std MG-1228 along with a heated probe filter, heated blowback and probe in a NEMA 4X fiberglass enclosure.

  • Premium

    Systech - Model EC91 - Intrinsically Safe Oxygen Analyzer

    Systech Illinois have over 25 years of expertise in manufacturing gas analysers for the process industry and have an installed base of over a thousand instruments during this time. The EC91 Process Oxygen Transmitter will detect levels of oxygen as low as 1ppm, up to higher percent levels and can be used on most industrial gases and atmospheres. ...

    By Systech Instruments Ltd Distributor in Artarmon, AUSTRALIA. from Oxygen Analyzer Instruments Product line

  • FibreDrain - Oil Mist Filters

    Nederman Filtac solutions for oil mist filtration are designed for continuous operations in demanding airflow applications. Our unique FibreDrain technology ensures superior separation performance and long filter media life, thus minimizing your overall costs and ensuring total peace of mind. A wide range of filters is available, covering the ...

    By Nederman Office in BAYSWATER, AUSTRALIA. from Filters for Oil Mist and Coolants Product line

  • ESD Waste2Water - Above Ground Solid Separator

    ESD Waste2Water designs and manufactures a full line of Solids Separators and liquid solid separators for a variety of waste water pretreatment applications. The Solids Separators are constructed of marine grade aluminum for effective chemical resistance, strength and durability. The Solids Separators will typically contain welded NPT fittings for ...

    By ESD Waste2Water, Inc. Office in Seaford, AUSTRALIA. from Wash Water - Equipment Washing Systems Product line

  • ScanAIR - Model Pro System Series - Smart Upstream Sampling and Downstream Filter Scanning System

    The Lighthouse ScanAir Pro System is a particle counter based HEPA/ULPA filter scanning system. It is the only easy and lightweight method for testing and scanning PTFE, fiberglass and other filter media for leaks. Incorporating an ergonomic lightweight scanning probe with touchscreen user interface, the ScanAir Pro System also includes a SOLAIR ...

    By Lighthouse Worldwide Solutions Distributor in Bayswater, AUSTRALIA. from Airborne Particle Counters - Portable Particle Counters Product line

  • After Cooler System (ACS)

    Designed for high efficiency removal of moisture, resulting in cool, clean and dry compressed air for use in abrasive blasting equipment. If your blasting operation or jobsite is in a region where there is not a big difference in the daily high and low temperatures, an aftercooler may be sufficient to handle the moisture in your blast system. ...

    By Axxiom Manufacturing, Inc. Office in AUSTRALIA. from AirPrep Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you