Coalescer Equipment In Germany
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco oil conditioning system should have a flow capacity of at least 1/2% of the total lube oil volume. The following chart depicts the recommended flow rate for reservoir size for each Hilco'- oil conditioning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO offers several designs and sizes of seal gas filters for the purposes of particulate and liquid removal. Each one of our units is designed to the requirements provided by the customer. With our many years of experience, we are able to determine the best option for the application whether it is an initial startup or an aftermarket retrofit. HILCO filters are available in simplex design and ...
-
Manufactured by SPX Flow Technology Norderstedt GmbHbased in GERMANY
Coalescing filters consolidate water vapor present in compressed air by forcing the air stream through a microscopically porous medium. The pores of the medium are large enough for air to flow through but not water, therefore separating the two to a degree. However, coalescing filters are often highly fragile making the internal ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
Water from hydraulic oil. Tramp oil from coolants. Oils and lubricants from cleaners. Liquid contaminants from waste effluents. Material: PP, Nylon, ...
-
Manufactured by Koch-Glitsch, LPbased in USA
When gravity forces alone do not produce an efficient separation of immiscible fluids, adding a KOCH-OTTO YORK® liquid-liquid coalescer system can improve separation efficiency. High separation efficiency can result in only a few parts per million (ppm) liquid dispersion in the liquid effluent stream. Created using combinations of ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
Liquid / liquid separation. Performance: 300-1500 ...
-
Manufactured by Boll & Kirch Filterbau GmbHbased in GERMANY
The BOLLFILTER Simplex BFB-C HD is used as a gas filter and coalescence separator in chemical and petrochemical plants, in the offshore industry, and in the power plant sector. This filter is primarily used for filtering fuel gas and seal gas. In cases of heavy contamination, the filter is combined with a pre-separator, e.g. a cyclone or ...
-
Manufactured by Boll & Kirch Filterbau GmbHbased in GERMANY
Simplex filters are the basic model of filter technology as all sieve designs can be installed with the various filter materials. BOLLFILTER Simplex Type 1.78.1 / 1.58.1 serve to protect the system parts from soiling and siltation and are in use everywhere where the process can be ...
-
Manufactured by Hollingsworth & Vosebased in USA
Coalescer filters trap and remove water, oil, and other liquid aerosols from compressed air or gas streams. Separating liquid droplets is a challenge, but it’s as critical as particulate filtration to keep systems moving. Our specially formulated coalescer media features a unique surface structure and gradient density that provides ...
-
Manufactured by Hollingsworth & Vosebased in USA
Coalescer filters for liquid/liquid separation need to efficiently remove water from petroleum-based liquids such as diesel, jet fuel, and hydraulic fluid to ensure our cars, planes, and heavy equipment function properly. Our market-leading grades are made from a combination of proven borosilicate microfiberglass and 100% synthetic, ...
-
Manufactured by AWAS International GmbHbased in GERMANY
The 3 stage separator for industrial use. The vortex separator AWAS Galaxie Tower combines the classic oil separator, coalescence separator and sludge trap. This solution is for maximum efficiency, safety and saving space – all in one component. Attention: oils will be automatically unloaded, as well as sludge. The compact design ...
-
Manufactured by Contec GmbHbased in GERMANY
Application: To separate dirt and aerosols such as oil and condensate from the gas flow From simple pressure loss to corrosive gases and hot gas application Filtration of solvents and other ...
-
Manufactured by EMW Filtertechnik GmbHbased in GERMANY
VERFILTAN V2 are outlet-side compressed glass-fibre media. VERFILTAN V2 incorporates a light oil coat providing improved dust ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
For renewal of: Hydraulic fluids / Lubricating oils. Cutting fluids / Oil & water based coolants. EDM - dielectric fluids / Synthetic oils. Performance: 180-600 ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
Hydraulic fluids / Lubricating oils. Cutting fluids / Oil & water based coolants. EDM - dielectric fluids / Synthetic ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to ...
-
Manufactured by RWO GmbH Marine Water Technologybased in GERMANY
The most commonly used oily water treatment systems use gravity to separate water from oil and solids. They are based on the principle of coalescence. Coalescers bind smaller and minuscule droplets of oil into oil droplets, which then rise faster in accordance with Stokes‘ law. Coalescing elements, on the surface of which the finest ...
-
Manufactured by KMU LOFT Cleanwater GmbHbased in GERMANY
The KLC-ZPS two-phase separator separates oil phases from the distillate with ultra high efficiency. KLC-ZPS uses purely physical separation to separate the oil phase from the water phase, by means of special flow guidance within the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you