coalescer Equipment in Missouri

  • Compressor and Coalescing Filters

    FilterPro carries a full line of replacement filters for compressors, and gas processing. Call our support staff with your OEM filter numbers and we will cross reference them to our direct replacements. All of our filtration products specifications are equal to or better than the original equipment manufacturer. Request our “cut sheet” ...

    By FilterPro based in East Lynne, MISSOURI (USA).

  • Blower Compressor

    Blower intake, compressor, silencer, air oil /Coalescers, and more, at a price you will love.

    By FilterPro based in East Lynne, MISSOURI (USA).

  • Model GP-198 - Coalescing Filters

    The Dollinger GP-198 coalescing filter is engineered to remove entrained oil, water mist, other liquids and solid particles efficiently from compressed air and other gas streams. When the Dollinger coalescing filter is used within its rated design conditions, an efficiency off 99.9% on 0.3 micron aerosols is achieved.

    By SPX Flow Technology Distributor in MISSOURI (USA). from Air Gas and Liquid Pipeline Product line

  • Tenco Hydro - Model Clari-Pac C - Coalescing Oil Water Separator

    The Tenco Hydro Clari-Pac C is used to separate free floating oil in wastewater. The influent energy is dissipated and evenly distributed as it enters the coalescing chamber, where coalescing media produces a weaving flow pattern to promote contact and coalescence of smaller oil globules into larger sizes. The increased rise rate due to the larger ...

    By Tenco Hydro, Inc. Distributor in MISSOURI (USA).

  • StormTEE - Stormwater Litter Control Screens

    StormTEE litter control screens are ideally suited for the simple, affordable removal of trash/litter/debris and associated pollutants from stormwater flows in a variety of applications. These patented, self-cleaning deflector screens can be used alone or in conjunction with other devices, including the combination fine- particle separation and ...

    By Bio-Microbics, Inc. Office in Sunset Hills, MISSOURI (USA). from BioSTORM Stormwater Treatment Systems Product line

  • BioSTORM - Stormwater Treatment Systems

    Pre-engineered stormwater treatment system removes trash, sediment, oil and other pollutants from stormwater runoff. The BioSTORM’s unique off-line design consists of a patented StormTEE self-cleaning deflector screen and a modular separation/coalescing unit, all housed in readily-available precast concrete tanks. The versatility of the ...

    By Bio-Microbics, Inc. Office in Sunset Hills, MISSOURI (USA). from BioSTORM Stormwater Treatment Systems Product line

  • Powell Water Systems

    “Electrocoagulation utilizes direct current to cause sacrificial electrode ions to remove undesirable contaminants either by chemical reaction and precipitation or by causing colloidal materials to coalesce and then be removed by electrolytic flotation. The electrochemical system has proven to be able to cope with a variety of water and ...

    By GM Water Technologies based in Manchester, MISSOURI (USA).

  • Smog-Hog - Model MSH - Mount Mist Collectors

    Make a big impact in a small space. The compact Smog-Hog MSH is a self-contained electrostatic precipitator (ESP) mist collector that can be mounted directly onto machining centers or nearby using ducting. The MSH is ideal for collecting machine tool coolant mist from applications including CNC machining, cold forming, plastic forming, screw ...

    By United Air Specialists, Inc Office in Lee’s Summit, MISSOURI (USA). from Industrial Mist Collectors- Smog-Hog / Mist Collectors Product line

  • Oil/Water Separator - Slant Rib Coalescing Oil/Water Separator (SRC) & Fiberglass Tank Oil/Water Separator (SRM)

    Parkson’s Model SRC and SRM Oil/Water Separators offer a reliable, compact, and economical solution to a wide array of oil/water separation applications. The Oil/Water Separators remove free, non-emulsified oil and settleable solids to produce an effluent with less than 10 mg/l of oil droplets 20 micron or larger.The influent flow first enters an ...

    By Parkson Corporation Distributor in MISSOURI (USA). from Separations & ENR Product line

  • Brink - Compressed Gas Filter

    Submicron oil and water particles are present in gas streams following industrial compressors. These mist particles are formed by evaporation and condensation due to the heat of compression and from lubricant blow-by, if lubricated compressors are used. The water can accumulate in air lines and freeze in cold weather. The water and oil can damage ...

    By MECS based in Chesterfield, MISSOURI (USA). from Brink Fiber Bed Mist Eliminators Product line

  • Front-Load Cleaning Systems

    As part of our original product offering, the PCS line of parts cleaning equipment has evolved into the finest cleaning system that your money can buy. This system not only provides precision cleaning, but also reliability that makes these systems a keystone in the world of cabinet cleaning systems. Choose from one of the most diverse product ...

    By JRI Industries, Inc., based in Springfield, MISSOURI (USA).

  • Model F-Series - Cleaning Systems

    The F-SERIES line of parts cleaning equipment was designed to sit flush against the wall saving valuable floor space. This system not only provides precision cleaning, but also reliability that makes these systems a keystone in the world of cabinet cleaning systems. Contact us today to schedule to have one of our approved distributors stop in and ...

    By JRI Industries, Inc., based in Springfield, MISSOURI (USA).

  • Heavy Duty Washers

    All JRI washers are built to last, and the HEAVY DUTY series parts cleaning equipment brings years of precision engineering into the finest cleaning system that money can buy. Using premium components and heavy weight 7GA. steel construction these systems not only provide precision cleaning, but long term reliability and durability. Choose from ...

    By JRI Industries, Inc., based in Springfield, MISSOURI (USA).

  • Vulcan - Indirect Fired Thermal Desorption Unit

    The Vulcan Indirect Fired Thermal Desorption Unit is a new 6′ diameter x 35′ long heated zone indirect fired 304 stainless steel rotary kiln with combustion chamber, a total of 16.2 MMBtu/hr. of North American combination fuel burners (pre-piped for oil firing), and gear and pinion sprocket drive powered by a 7.5 hp motor. Designed to ...

    By Vulcan Systems based in Moberly, MISSOURI (USA). from Thermal Desorption Systems- Vulcan Thermal Desorption Systems Product line

  • Model 237 - Gas Chiller Drying System

    The gas first passes through a coalescing filter where particulates are removed. This prevents impingement on the heat exchanger fins and extends the life of the heat exchanger. A Glycol mixture is chilled using a refrigeration unit. The glycol is then circulated through a heat exchanger where it cools the gas to the desired temperature. Any ...

    By Varec Biogas Distributor in St. Louis, MISSOURI (USA). from Gas Control Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you