coalescing oil-water separator Equipment in United Kingdom

31 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: coalescing oil-water separator ×

  • In: Europe ×

  • In: United Kingdom ×

Custom Scrubber Elements

by Solberg Manufacturing, Inc.     Office in Wolverhampton, UNITED KINGDOM

Filter change out differential: 10'-15' in H2O over initial delta P. Pleated filter media. Optimal surface area to flow ratio. Wide range of operation flows. Flat gaskets provide for optimal sealing surface. Electronically continuity throughout filter element. Reinforced steal core capable of withstanding 15 PSID.

Oil/Water Separator for Liquid Separation

by Geotech     based in Leamington Spa, UNITED KINGDOM

The high capacity cost effective low maintenance compact oil water separators utilise a highly efficient coalescing media pack. The separators are fully automatic, involve no moving parts and can be supplied for flows up to 60 lpm.

Coalescing Systems

by Serfilco International Ltd     based in Irlam, UNITED KINGDOM

Liquid / liquid separation. Performance: 300-1500 gph

Oil Filtration And Reconditioning Systems

by Serfilco International Ltd     based in Irlam, UNITED KINGDOM

For renewal of: Hydraulic fluids / Lubricating oils. Cutting fluids / Oil & water based coolants. EDM - dielectric fluids / Synthetic oils. Performance: 180-600 gph.

Trans-O-Filter

by Serfilco International Ltd     based in Irlam, UNITED KINGDOM

Hydraulic fluids / Lubricating oils. Cutting fluids / Oil & water based coolants. EDM - dielectric fluids / Synthetic oils.

Coalescing Cartrigde

by Serfilco International Ltd     based in Irlam, UNITED KINGDOM

Water from hydraulic oil. Tramp oil from coolants. Oils and lubricants from cleaners. Liquid contaminants from waste effluents. Material: PP, Nylon, Glass.

AlphaSEP - Liquid/Liquid Coalescers

by HAT International Limited     based in Nelson, UNITED KINGDOM

FP Flat Plate Packs; These flat plate packs are manufactured in modular sections with plate spacing to suit the application. Plate angle is normally 45 or 60 degrees and common applications include crude oil/water separators.

Megator - Model SS-MEGA-OWS - Oil Water Separators

by Megator     Office in Sunderland, UNITED KINGDOM

The SS MEGA-OWS parallel plate oil water separator is sized according to the American Petroleum Institutes Publication No. 421 formula for oil water separator sizing. This separator will remove virtually all free and dispersed oil from the wastewater. The effluent shall contain less than 10mg/1 of oil droplets greater than 20 microns with a ...

Oil-Water Separators

by Progressive Product Developments Ltd     based in Swanwick, Southampton, UNITED KINGDOM

Our separators have been independently tested by B.S.IHemel Hempstead, England; L.G.A. Wurzberg, Germany and C.S.T.B. Nantes, France, the major separator test facilities in Europe. The EN858 test simulates a rain storm with oil being mixed turbulently into the water before entering the separator. The outflow from the separator must contain less ...

Oil Grabber - Model 4 - Belt Oil Skimmer

by Abanaki Corporation     Office in Kingswood, UNITED KINGDOM

The Abanaki Model 4 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 4 alone to reduce oil content to less than five parts per million in ...

Oil Separators

by SeparatorsPlus     based in Keighley, UNITED KINGDOM

These are designed to achieve a discharge concentration of less than 100 mg/litre of oil under standard test conditions and are suitable for dealing with discharges where a lower quality requirement applies. e.g. discharges to foul sewer.

Model Lube-Sep - Mobile Tramp Oil Separator

by Lubriserv Ltd.     based in Gloucester, UNITED KINGDOM

Coolants and wash solutions inevitably become contaminated with tramp oil and particulate material during the production process. This contamination provides an ideal breeding ground for bacteria and fungi, which quickly degrade the coolant.

Abanaki Oil Grabber - Model 8 - Belt Oil Skimmer

by Abanaki Corporation     Office in Kingswood, UNITED KINGDOM

The Abanaki Model 8 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, oil skimmers alone will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 8 alone to reduce oil content to less than five parts per million in ...

Forecourt Separator

by SDS Limited     based in Biddisham, UNITED KINGDOM

Forecourt separators are full retention separators specified to retain on site the maximum spillage likely to occur on a petrol filling station. They are required for both safety and environmental reasons and will treat spillages occurring during the vehicle refuelling and road tanker delivery.The size of the separator is increased in order to ...

Abanaki Oil Grabber - Model MB - Oil Skimmer

by Abanaki Corporation     Office in Kingswood, UNITED KINGDOM

The Abanaki Model MB Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model MB alone to reduce oil content to less than five parts per million ...

Compressor Separators

by PSI Global Ltd     based in Stockton-on-Tees, UNITED KINGDOM

Utilising its own media manufacturing plant and patented technology, PSI Global guarantees trouble-free separation for end users whether they require a wrapped or moulded separator. Whilst a filter removes solid particles from the air stream via a matrix, a separator causes sub-microscopic liquid aerosols to coalesce into larger droplets that ...

Oil Separators Plants

by PIMS Group     based in Farnborough, UNITED KINGDOM

PIMS Wastewater Treatment Plants solve oil spillage problems to protect the environment. Oil Separators are mandatory for all large drained areas subjected to vehicular loading, protecting the environment against pollution by hydrocarbons – diesel, petrol or engine oil. Our solutions ensure full compliance with PPG3 and pr EN 858-2 European ...

ESD Waste2Water - Above Ground Solid Separator

by ESD Waste2Water, Inc.     Office in Barlaston Staffs, UNITED KINGDOM

ESD Waste2Water designs and manufactures a full line of Solids Separators and liquid solid separators for a variety of waste water pretreatment applications. The Solids Separators are constructed of marine grade aluminum for effective chemical resistance, strength and durability. The Solids Separators will typically contain welded NPT fittings for ...

Handte Oil Expert - Oil Mist Collectors

by Camfil Air Pollution Control (APC)     Office in Haslingden, UNITED KINGDOM

The Handte Oil Expert oil mist collector uses a modular, user-friendly design to provide a high-end solution for high-efficiency oil mist separation. Got pure oil? Neat Oil? Call in the Expert!

Tilted Plate Oil Interceptors

by Stetfield Separators Ltd.     based in Penryn, UNITED KINGDOM

For enhanced gravity separation of immiscible liquids via inclined parallel plates and coalescing media. Self contain above-ground and in-ground parts kits.

Related Terms for coalescing oil-water separator

Need help finding the right suppliers?

Let the XPRTs do the work for you