Combustive Air Equipment Available In Latin America
-
Manufactured by E-Tech, Inc.based in USA
Custom-engineered and built to last. Our tubular air heaters allow you to recapture heat from combustion products to preheat combustion air. The improvement in efficiency can be as much as 2.5% for every 100 degrees of flue gas ...
-
Manufactured by Geurts Heatexchangers B.V., part of Heilig Groupbased in NETHERLANDS
For fuel-fired industrial heating, preheating the combustion air flowing to the burners is one of the most efficient and energy-conserving ways to enhance the productivity of your processes. Investing in a customized system designed by Geurts, recuperating the heat energy from the exhaust gas stream, not only reduces the CO2 emission and ...
-
Manufactured by Buding High-Tech (Jiangsu) Co., Ltd.based in CHINA
Places with high fire rating requirements, workshops with open flames, underground parking lots, and buildings below the negative ground floor are ...
-
Manufactured by Benz Air Engineering Co. Incbased in USA
The PreMizer combustion air heating solution measures overall efficiency and recovers the optimum amount of condensate that can be returned to the boiler. Since this solution is responsive to the level of condensate, it can fine tune the system after determining how much condensate can be returned directly to the boiler or ...
-
Manufactured by LTG Aktiengesellschaftbased in GERMANY
Most LTG combustion air fans are radial fans with intake on one side and a direct drive. They have a rugged welded spiral housing, a welded high-alloy aluminium impeller and back-curved blades. Their modular design allows them to be set up in a variety of casing positions. An insulated intake box and a top-mounted intake filter ensure ...
-
Manufactured by Elettromeccanica Delta S.p.A.based in ITALY
The VRA/VLA/VTA types are normally closed solenoid valves for cold combustion air regulation.When the coil is not energized the spring works on the disc, keeping the adjusted minimum passage of air. When powering the coil the valve opens, moving the disc to the maximum open position. When power is switched off the valve moves to the ...
-
Manufactured by VIG Industriesbased in USA
VIG Industries offers its own line of zero and combustion air generators. These Generators are built to each customers specific needs at no extra development charge. ...
-
ShowcaseManufactured by FPZ S.p.A.based in ITALY
The side channel single-impeller and single-stage (MS) blowers represent one of the main FPZ product ranges. A point of reference in many fields of application, the MS blowers are characterized by a compact design that allows a higher installation flexibility compared to other product ...
-
PremiumManufactured by Environics, Inc.based in USA
compressed air supply or dangerous and expensive gas cylinders. The air is suitable for use as: a zero reference calibration gas, ultra-pure combustion air for flame ionization detector (FID), and service air for pneumatically operated valves. The system is capable of delivering air free from ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- Intelligent control for a long service life and high level of efficiency - Compactly integrated into the boiler or as a stand-alone version for simple retrofitting - Feed water cooling or combustion air preheating as alternatives to the condensing heat ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our transportable model 3-200 fully heated FID is successfully used throughout international markets for over 30 years. Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using our proprietary back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
PremiumManufactured by Testo, Inc.based in USA
Does a sizeable part of the work you do have something to do with refrigerant systems or heat pumps? Then here’s one tool you can’t afford to be without: the testo 550-2 digital manifold ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or ...
-
PremiumManufactured by Testo, Inc.based in USA
The flue gas analyzer testo 350 MARITIME can be used for emission measurement on marine diesel engines for measuring the gaseous exhaust gas concentrations of NO, NO2, SO2, CO, CO2-(IR), O2. In order to meet the harsh requirements at sea, the complete flue gas analyzer, including accessories, is housed in a robust protective case with a trolley function – the testo 350 MARITIME flue gas ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 is available with or without an Operator Interface (control unit), so for the most cost effective monitoring ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 109L is a heated FID analyzer to continuously and simultaneously measure the Methane concentration, the Total Hydrocarbon concentration and the Non Methane concentration within a gaseous sample. The 109L is a table top or 19 inch rack mount Heated FID analyzer for the NMHC measurement in ambient air, exhaust gases from a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you