Contaminant Plume Equipment
-
based in CANADA
; pattern is not geometrically limited allowing the system to target contaminated plumes of any ...
-
Manufactured by Geonics Limitedbased in CANADA
Three interchangeable transmitters - TEM47, TEM57-MK2 and TEM67 - are used with the PROTEM receiver and an appropriate receiver coil to make up different PROTEM systems for various applications such as mineral exploration, structural mapping, resistivity sounding and contaminant plume ...
-
Manufactured by Geonics Limitedbased in CANADA
The EM34-3 is a simple-to-operate, cost-effective instrument for the geologist and hydrogeologist alike; applications have been particularly successful for the mapping of deeper groundwater contaminant plumes and for the exploration of potable groundwater ...
-
based in USA
or eliminated, mitigating additional contaminant plume issues. Redox Tech has recently formulated a mixture of sodium persulfate and calcium peroxide that can be employed for ISCO applications using FMC’s Klozur™ activation ...
-
based in UNITED KINGDOM
DPE is an in-situ remediation method involving the combined extraction of liquids, water, free phase product and vapour from the vadose and phreatic zones of the contamination plume. Dual-phase vacuum extraction is not a strictly accurate description and multi-phase may be a better suited term dependent on site objectives and conditions. The ...
-
based in UNITED KINGDOM
In chemical oxidation, chemicals are added to the plume area to chemically oxidise contaminants into less hazardous or less toxic compounds which are also more stable and less mobile. In the case of organic compounds such as petroleum, they are converted into carbon dioxide and water. It is also possible, under the correct ...
-
Manufactured by Geonics Limitedbased in CANADA
Within the exploration community there is a well known trade-off between depth of exploration and target definition in terms of conductivity, extent and orientation. Greatest depth is obtained with large fixed loop Turam-type systems which generate large half-space responses that, along with current gathering, makes target detection difficult. Better spatial resolution is obtained with a moving ...
-
based in USA
The traditional air sparging and vapor extraction (AS/VE) remedial option has been implemented at sites worldwide. The AS/VE remedy is based on air injection into the formation via a sparging point and recapturing of the volatized contaminants via vapor extraction from another location. The two points may be tens of feet apart. ...
-
Manufactured by Scintrex Limited - a Division of LRSbased in CANADA
Setting the Standards in Electrical Methods.SARIS Resistivity SystemInnovative Sounding and Imaging.SARIS is the latest innovation in resistivity technology. A truly unparalleled approach to providing the user with a cost effective, easy to use and infinitely useful instrument designed with the user in ...
-
Manufactured by Tersus Environmental, LLCbased in USA
The Waterloo Emitter™ is a simple, low cost device designed for the controlled and uniform release of oxygen, or other bio-enhancing amendments, to encourage and sustain the growth of microorganisms required for in situ bioremediation of contaminated groundwater. The patented technology (U.S. Patent # 5,605,634) enables steady, ...
-
Manufactured by Intrinsyx Environmentalbased in USA
Intrinsyx Environmental uses its collection of unique tree endophytes to inoculate trees and grasses to effectively remove and degrade contaminants in groundwater, surface water, and soil.The company has over 30 phytoremediation sites in the US, using endophyte enhanced poplar and willow trees to clean contaminated soil and groundwater plumes. ...
-
Manufactured by Bio Rembased in USA
The strains that have been identified by Bio Rem, which are not genetically altered, have been named and are known as microaerophillic. H-10 is a formulation of specialized 100% natural occurring microaerophillic bacteria, which depend on hydrocarbons for their proper ...
-
Manufactured by SPOHR-Messtechnik GmbHbased in GERMANY
Stainless steel Model 407 Bladder Pumps provide consistent, accurate, reliable groundwater samples in all applications. Ensuring no air/water contact during operation, pumps are ideal for VOC sampling. PTFE bladders are ideal for dedication. Inexpensive polyethylene bladders are also available. Stainless steel pumps are effective at any angle, to depths of 500 ft (150 m), and are ideal for low ...
-
by TerraDatbased in UNITED KINGDOM
Soil Vapour Surveys are an integral tool for the location of contamination “hotspots”. They are used as an aid in determining the nature and extent of contamination at a site. The soil vapour survey confirms the presence of vapours in the subsurface environment and can serve as a guide in decided upon locations for ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 703 Waterloo Emitter™ is a simple, low cost device for the controlled release of oxygen or other amendments to encourage and sustain the growth of microorganisms, required for in-situ bioremediation of contaminated groundwater. Ideal for the diffusion of oxygen to enhance the bioremediation of BTEX and MTBE. Emitters provide ...
-
Manufactured by Marton Geotechnical Services Ltdbased in UNITED KINGDOM
The LeveLine CTD records highly accurate water level, temperature, conductivity and salinity measurements in a wide range of groundwater and surface water applications. Housed inside the sealed body is a ceramic level sensor, temperature sensor, 10-year lithium battery and a versatile datalogger with capacity for 500,000 data points. ...
-
Manufactured by Aquaread Limitedbased in UNITED KINGDOM
The LeveLine-CTD is a water level, temperature, conductivity and salinity recording device that has been specifically designed for long term water level logging. It is made from titanium making it suitable for deployment in all water ...
-
Manufactured by RS DYNAMICS LLCbased in SWITZERLAND
These products combine the advantages of advanced excellent PID and IR technology. The ECOPROBE 5 replaces a number of separate analysing devices with one small, compact instrument. It provides the user with the in-situ measurement of organic contaminants with selective analyses of methane, group of common petroleum hydrocarbons, CO2, ...
-
Manufactured by Vacmastersbased in USA
The System 5000 is a commanding excavation tool — the only one you’ll need for underground utility location, repairs, maintenance, and installation. It uses intense air power to penetrate, expand and explode the soil from within while keeping it dry for easy vacuuming and quick backfilling. It’s versatile and adaptable and offers high maneuverability with solid performance. ...
-
based in USA
Phase I – Contamination Analysis from Client. In this phase, alI information and data relating to the suspect site are collected, including the following: plans and information about the existing facilities and equipment, data and information about soil pollution potential sources, history of soil contamination and spills, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you