Contaminant Treatment Equipment In USA
-
Manufactured by United Rentals Europe, formerly known as BakerCorpbased in NETHERLANDS
The diagram below shows a typical groundwater treatment system in which contaminated runoff water and soil drainage can be removed and safely disposed of before new construction begins. Contaminated water is pumped out of the excavation site and processed through several stages of increasingly fine filtration. The clean effluent is then ...
-
by SAVRONbased in CANADA
STAR is an innovative in situ thermal technology based on smoldering combustion, where the contaminants are the fuel. The process is sustained by the addition of air through a well to the target treatment zone and is initiated through a short duration, low energy “ignition event.” Once the process is initiated (ignited), the ...
-
by SAVRONbased in CANADA
systems. Hottpads are fully scalable and can be sized depending on treatment volume, available footprint, and treatment time requirements. These systems are ideal for stockpiles of contaminated soils, sites where surficial soils are contaminated, and for waste oils and ...
-
PremiumManufactured by Jenfitch INC.based in USA
RO systems bring a great advancement to water treatment. However, they are susceptible to biofouling. JC 9450 is effective at pre-treatment to remove any trace of organic contaminants and post-treatment to prevent biological re-growth. JC 9450 is a high strength oxidant in the same family as ozone but at a much lower capital and ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Ion-Selective Electrodes (ISE’s) are a class of sensors that respond to the presence of specific ions, such as sodium (Na+) or bromide (Br). They are used in conjunction with a reference electrode, and report ion concentrations in mg/L. ...
-
Manufactured by Puralyticsbased in USA
contaminant treatment of any portable water ...
-
Manufactured by EPS Wastewater LLC.based in USA
Oil Water Separators (OWS), also known as coalescers, are effective for the continuous flow separation of non-emulsified free oils and other immiscible liquids. Since free oil can be a problematic contaminant for other treatment equipment, it is important to remove as much as possible before further treatment. An OWS can remove up to ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by Canadian Crystallinebased in INDIA
Our demineralisation plant performs efficiently in purifying and removing varieties of impurities from water. Equipped with advanced filters, our demineralisation plant helps in faster removal of pesticides, bad taste, odors, colors and related harmful chemical contaminants. Water treatment through demineralized water system makes water ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by PTA Pharma-Technischer Aparatebau GmbH & Co.KGbased in GERMANY
The Uni washer is designed to handle mid-sized production capacities with short cycle times. The loading and unloading process for the components (pre-loaded as bulk goods in boxes) is fully automated. The Uni Washer was developed together with a world leading pharmaceutical company to ensure a fast and high-quality process of a high volume ...
-
Manufactured by Anuabased in USA
The AiraShell Biohybrid Filter utilizes recycled seashells as filter media to harness the power of nature and to balance pH. The shell media, water, and microorganisms create an optimal microenvironment for contaminated air treatment. This ensures optimal performance across a broad range of odorous and corrosive ...
-
Manufactured by Aclaritybased in USA
The Aclarity system destroys PFAS using a proprietary electrochemical process to break down contaminants. We work with treatment facilities, municipalities, landfills and other organizations to solve large, cost prohibitive water problems upstream. In drinking water, the contaminants are destroyed and clean water passes out the other ...
-
Manufactured by Calgon Carbon Corporationbased in USA
Calgon Carbon's CYCLESORB-HP is a compact, all stainless steel, portable, liquid treatment unit that contains all the essential elements of a full scale carbon adsorption system. Containing 2,000 pounds of granular activated carbon, the CYCLESORB-HP can treat up to 60 gpm for removing dissolved organic contaminants. When treatment is ...
-
Manufactured by AquaPhoenix Scientific Inc.based in USA
Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries), or fertilizer ...
-
based in USA
Hybrid Fracturing is an innovative technology developed by ARS to facilitate more effective and economical in situ remedial treatment of contaminated soils and groundwater. Hybrid Fracturing incorporates two proven remedial technologies whose benefits have already been well established in low-permeability soils: Pneumatic Fracturing ...
-
Manufactured by ModuTank Inc.based in USA
Equalization of wastewater tanks is a vital part of waste management systems and for the minimization and control of inconsistencies in wastewater. Both primary types of equalization tanks; equalization of contaminants and equalization of flow, are engineered to deliver a constant rate of flow and contaminants to water treatment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you