Continuous Emissions Monitoring Equipment Near Connecticut
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The air-conditioned cabinet is designed for housing the monitoring equipment in ambient or stack environments where it is essential to protect the instruments from dust, damp and heat. The cabinet is equipped with cooling and heating equipment in order to maintain stable temperature. It can be fitted with humidity and/or temperature ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
path. Calibration gases are flushed through the cell. A range of cell lengths allows flexible selection of a calibration procedure to suit the system and the compounds it is specified to ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers compact analyser packages for monitoring NOX, SO2, CO and O2 in many different kinds of stack gas ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. A built-in PC with LCD display controls the function of the ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400CS is a cost-effective, high-performance monitoring package, designed for power plants and waste to energy plants. The measurements are based on the FTIR (Fourier Transform Infrared Spectroscopy) and/or DOAS technique (Differential Optical Absorption Spectroscopy), allowing continuous monitoring of several compounds. ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The ER060L-EEx emitter and receiver set, together with Opsis LD500 laser diode gas analyser, is designed for gas monitoring in explosion classed areas Zone 1 and 2. The monitoring set creates a light path across the internal diameter of a stack or duct for an Opsis emissions monitoring system. Light is generated by the analyser, ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS provides a range of sensors for various applications, such as pressure, and temperature. They are specially designed to be easily integrated into an OPSIS monitoring system using OPSIS data logging hardware and ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400HWE Hot Wet Extractive is based on OPSIS UV/FTIR DOAS system giving fast response and best possible performance for all gases. The high resolution FTIR system is free from interference from all gases including ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The System M800 is tested and approved by international test institutes and measures SO2, CO2 and NOx using the reference methods NDUV and NDIR. A light emitter and receiver creates a light path across the internal diameter of the stack. From the receiver, the light is guided in an optical fiber to the ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers a wide range of shelter models and configurations to guarantee the optimal operation environment for your measurement equipment. We have experience in all environments, from hot and humid, to ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
and easy to operate, Lancom 4 enables highly accurate spot and semi-continuous gas testing adaptable to a wide variety of applications – ensuring your plant maintains full compliance with safety and emissions ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The OPSIS O2000 oxygen monitor is designed to monitor oxygen concentrations in industrial applications such as continuous emissions monitoring (CEM) and process control. It has been given a ruggedized design (IP65 protection) allowing it to operate under tough conditions in aggressive flue gas ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers compact analyser packages for monitoring NOX, SO2, CO and O2 in many different kinds of stack gas ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Automatic gas calibration is available by using calibration gas and prefilled calibration cell. The gas cell is filled with a mixture of gases allowing all gases measured by the system to be checked. All data from gas calibration and automatic QAL 3 checks are stored in separate calibration data files, and are sent to the reporting software for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you