Continuous Gas Analyzer Equipment Available In Monaco
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The experts in IR-active components: Most frequently used for sophisticated applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measurement quality. This is guaranteed by modern electronics, ease of operation, and a physical element that is adapted to the measurement ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 6 also meets the high standards in demanding applications through modern electronics, ease of operation, and a physical element that is adapted to the measurement ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
For oxygen standard applications. The OXYMAT 61 is a cost-effective oxygen analyzer for standard applications. The OXYMAT 61 requires ambient air as reference gas. This is supplied by a pump that is integrated into the analyzer housing. Alternatively, pressurized bottle air can be used. The OXYMAT 61 measures oxygen using the ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Specializing in hydrogen and noble gases: For continuous measurement of hydrogen and noble gases, the specific thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentrations of all other ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Best combination for IR-active components and oxygen. The ULTRAMAT/OXYMAT 6 combines the features of the ULTRAMAT 6 and the OXYMAT 6 in one 19" analyzer. Most frequently used for demanding applications, the ULTRAMAT/OXYMAT 6 must meet high standards with regard to reliability and measurement quality. This is guaranteed by ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 64 can measure oxygen concentrations in the smallest traces, even down to the minimal measuring range of 0...10 ppm. This is most relevant in air separation plants, in the technical gas production, and welding of high-alloy steels, titanium, and the like under a protective atmosphere. Further applications are realized in hardening ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...
-
Manufactured by CEM Specialties Inc.based in CANADA
The Magnos206 is based on the paramagnetic behavior of oxygen and magneto-mechanical measuring principle. Thanks to the short T90 time, the Magnos206 is also suitable for measuring rapid changes in the concentration of the sample ...
-
Manufactured by CEM Specialties Inc.based in CANADA
The Caldos25 is designed for highly corrosive applications. The measuring cell with its glass-coated resistor is especially resistant to corrosive gases. With the Caldos25, pressure correction is not required since the measurement signal is completely independent of the sample gas pressure - whether negative or ...
-
Manufactured by CEM Specialties Inc.based in CANADA
single-point calibrations with only one ...
-
Manufactured by CEM Specialties Inc.based in CANADA
The various Limas11 process photometers are easily configured to meet individual process measurement requirements. The Limas11 UV and Limas11 IR photometers measure up to five (5) components (including the optionally installed oxygen sensor. The Limas11 HW photometer measures up to four (4) components and uses the UV-RAS method (ultra-violet resonant absorption spectroscopy) to selectively ...
-
Manufactured by AlyXanbased in FRANCE
Continuous online analyzer of process gases. The SOLYZE instrument provides a broadband detection in real time. It detects most light gases, even in small concentrations. It is especially well suited for the detection of H2 and for monitoring corrosive gases. Thanks to a small ion trap, the overall instrument size and weight are minimized. ...
-
Manufactured by Agimas UGbased in GERMANY
Thermal conductivity detectors based on a micro-mechanical chip. High sensitivity e.g. 0-0.4% H2 in Ar independent of ambient temperature. Fast response with a T90 time of about 1sec even at gas flows as low as 5l/h. Pressure proof (up to 20bar) flow through device with very small dimensions. Signal processing included and thereby easy ...
-
Manufactured by Agimas UGbased in GERMANY
Precise and long-term stable thermal conductivity measurement. Control of ambient air or connection to measuring gas via ¼-inch female thread. Teflon membrane as protection against condensate or contamination. Fast response with a T90 time of less than 10sec. Potential-free 4-20mA output, configurable through RS232. ...
-
Manufactured by Agimas UGbased in GERMANY
Accurate and long term stable thermal conductivity ...
-
Manufactured by Agimas UGbased in GERMANY
Ideal for Oxygen And Hydrogen Measurements. Thermal conductivity transmitter based on a micro-mechanical chip. No additional gases (except for measuring gas) or other consumables needed. Rugged aluminum housing (IP65) with small dimensions (105x50x50mm3). Linear 4-20mA signal output option: 1-10V). Easy calibration using a ...
-
Manufactured by Process Insights, Inc.based in USA
Index besides Wobbe Index and Heating Value. Using our 9610 calorimeter continuous gas analyzers with expert design make BTU Analysis a definitive money saving ...
-
Manufactured by Digimedbased in BRAZIL
The continuous gas analyzer 2, CO and NO or NO 2, compact, robust and easy installation and maintenance, where the cost / benefit ratio is extremely attractive. It has two measuring cells for the gas to be measured using this technology is that one obtains greater accuracy of measurement. The calibration of the ...
-
Manufactured by Digimedbased in BRAZIL
The continuous gas analyzer 2, CO, CO 2, NO, NO 2 and SO 2, compact, robust and easy installation and maintenance. It has two measuring cells for the gas to be measured using this technology is that one obtains greater accuracy of measurement. The calibration of the analyzer can be manual or automatic (optional). ...
-
Distributed by KASSAY Field Services, Inc.based in USA
into the G2-extractive cell while the FTIR continuously analyzes the gas and reports speciated concentrations in real ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you