continuous level monitoring Equipment available in Sudan

Available in Sudan| Near Sudan
1006 Results found

We couldn't find any continuous level monitoring equipment in Sudan

Here is a list of results available in Sudan

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: continuous level monitoring ×

  • Available in: Africa ×

  • Available in: Sudan ×

NEO Monitors - Model LaserGas™ II SP Compact - Standard Single Path Compact Monitor

by NEO Monitors AS     based in Skedsmokorset, NORWAY

Derived from the standard Single Path instrument, SP Compact Monitors are optimized for short distance measurement in the range 10 to 100 centimeters. The Monitors feature a focused laser beam, which enables the instrument to measure through very thin nozzles (< 10 mm diameter). For applications with continuous purge to prevent dust on the ...


Arjay - Model HydroSense 3410 - On-line ppm Oil in Water Monitor Analyzer

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The HydroSense 3410 offers a high accuracy approach to monitoring low concentrations of free and soluble oils in water. Combining many unique design features into a compact package makes this an ideal solution to monitoring for oil contamination in your water system. Fluorescence technology is selective to ppm levels of petroleum hydrocarbons by ...

Hi-Q - Model MASS - Flow Controlled Continuous Duty Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow air sampling system - you make the call. Have an existing Stack Flow Rate Monitor? HI-Q's MASS Unit can easily be linked together with an existing stack-flow ...


Instrumatic OXYDAN - Model DPIII/79x - Stack Gas Dilution Sampling Probe

by Instrumatic A/S     based in Ry, DENMARK

Instrumatic is a world leader in design and manufacture of exhaust gas dilution probe systems. In compliance with Environmental Protection Administrations and tested by International Association of Instruments Users SIREP-WIB-EXERA 1993.No matter how good or precise the analyzer/sensor are the result never better than the sample provided to the ...

NivuMaster - Model P Series - Ultrasonic Sensors for Level Measurement

by NIVUS GmbH     based in Eppingen, GERMANY

P-Series sensors are suitable for continuous level measurement in the water and wastewater sector. For connection to NivuMaster-Series evaluation units. Suitable for harsh ambient conditions.

Arjay - Model 2852-LT / 2851-LT - Remote Mount Level Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

Over 40 years of capacitance experience stands behind the 2852-LT level monitor. The unit continuously monitors the liquid or solids level in a tank, stand-pipe or containment. Outputs include analog, digital, and relay control for interface to alarms, valves, pumps and other process monitoring equipment.

Model DCEM2000 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

Level Mate - Model III - Level Measurement System

by AMETEK- Drexelbrook     based in Horsham, PENNSYLVANIA (USA)

The AMETEK LEVEL MATE III Level System uses a stainless steel transmitter as standard. A series of perforations in the bottom of the unit protects the sensing port from either clogging or damage. The same snub-nosed end can also unscrew, allowing for easy calibration checks.

StakGard - Tribo Electric Indicative Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The Stakgard continuous dust monitor uses the well-proven tribo-electric effect to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and present it to the operator via a unique modulating LED display. StakGard ...

Model DCEM 2100 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

EnergyTech - Model 301 - Tribo Electric Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, ...

ABB - Model LMC7100 - Liquid Level Sensor

by ABB Measurement Products     based in Zurich, SWITZERLAND

The LevelMaster combines the industry’s most innovative hardware and software to address the unique custody-measurement and operational needs of tank-level management. The LevelMaster provides not only an accurate level gauge, but also an accurate measurement of the oil and water interface.

Protea - Model AtmosFIRi - Multi-component FTIR Gas Analyser for Continuous Measurement

by Protea Limited     based in Middlewich, UNITED KINGDOM

atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use, portable and a very low cost product that provides real-time online measurement suitable for plant systems. Often, gas monitoring applications require high concentration and quick response, and low level detection limits are not necessary. ...

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

HORIBA - Model APNA-370 - Ambient NOx Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APNA-370 continuously monitors atmospheric NOX, NO2, and NO concentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and ...

Arjay - Model 2880-LT / 2881-LT / 2882-LT - Probe Mounted Level Transmitter

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

Over 40 years of capacitance experience stands behind the 2880-LT level transmitter. The probe continuously monitors product levels to provide a proportional level signal for pumps, alarms or control system interface.

Arjay - Model 2852-LS - Two Point Solid/Liquid Level Switch

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

Over 40 years of capacitance experience stands behind the 2852-LS level controller. The sensing probe continuously monitors the level changes in a vessel to alarm at user defined setpoints. It is typically used to control pumps and valves, alarm of high or low product conditions, or alert to potential overflow and dry conditions.

LeveLine - Model EWS - Early Flood Warning System

by AQUAREAD Limited     based in Broadstairs, UNITED KINGDOM

Flooding is a continuous threat for many people in the UK. The LeveLine-EWS functions as both an early flood warning system, providing instant alerts to rising water levels and as a continuous water level monitor. These great new systems are available to purchase now.

TAPI - Model 465L + O2 - Industrial Hygiene Ozone Analyzer with Oxygen Sensor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 465L UV Photometric Ozone Monitor is an extremely stable analyzer, ideal for critical low-level ppm safety and process applications.  Its calibration is NIST traceable and the included pressure and temperature compensation ensure high accuracy under all conditions.  An integral micro fuel cell sensor provides accurate, ...

Land - Model FGA 900 - CO & O2 Continuous Combustion Efficiency Monitor

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The FGA 900 series of combustion efficiency monitors use dual sensor technology to measure the levels of up to Carbon Monoxide (CO) and Oxygen (O2) in a single compact unit. This range of gas analysers carry a wide range of compliance and performance approvals including those from the US-EPA, UK MCERTS and German TÜV.

Need help finding the right suppliers?

Let the XPRTs do the work for you