We couldn't find any cooling technology equipment suppliers or service providers located in Micronesia
Here is a list of equipment results with suppliers serving Micronesia
Cooling Technology Equipment Available In Micronesia
-
Manufactured by IACbased in USA
IAC designs and installs gas stream cooling systems such as Heat Exchanger (air-to-air) Systems, Evaporation Cooling Systems, and Dilution Air ...
-
Manufactured by Ventech Systems Pvt. Ltd.based in INDIA
An Evaporative Air Cooling System is an economical substitute for Air-conditioning System to provide comfortable environment in places where dry and hot climatic Conditions prevail. There occurs no effective heat transfer from air in absolute terms, but it is only transformation of sensible heat energy of air into latent heat and as a ...
-
Manufactured by Andritz Ritz GmbHbased in GERMANY
Efficient and cost-effective cooling of submersible motors is a constant source of discussion by well and mine operators. Derating is a less-than-ideal solution. In addition to high capital and energy costs, the overlarge, downgraded motors usually require a larger well diameter. Oil cooling needs careful consideration as well – any ...
-
by Ecolab Inc.based in USA
Refining and petrochemical cooling water systems provide the most difficult challenges in the water treatment industry. High exchanger skin temperatures, low water velocities, degrading quality of make-up water streams and tightening environmental restrictions continue to increase the stress on these systems. Poor performance of a cooling ...
-
Manufactured by Torkapparater ABbased in SWEDEN
Torkapparater is a specialist in the field of indirect cooling processing technology. The technology is developed around a rotary tubular cooler with indirect heat transmission for hot solid materials. Indirect cooling implies that the material to be cooled does not come in contact with the ...
-
Manufactured by France Evaporationbased in FRANCE
This technology is particularly suitable for viscous and sensitive liquids, having a substantial proportion of dry matter. It is reserved for processes which require a small amount of evaporation compared to the ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In the manufacturing process we developed the foils are reinforced at the outer edges and in the middle and are therefore very stable. This makes our film fill media extraordinarily resistant to erosion. Our unique welding method connects the single foils with up to 20.000 welding points per m3. This high number of connections results in robust packings with high mechanical load capacity. Bearing ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling water ...
-
by Ecolab Inc.based in USA
generation of 3D TRASAR Cooling Water Technology gives you the information and operational assistance you need to control your cooling water ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily ...
-
Manufactured by Binder GmbHbased in GERMANY
The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -10 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
treatment in the cooling circuit to prevent the formation of deposits and bacterial growth, 2H SANIPACKING fills serve to minimize the risk of infections from legionella ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an even higher ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the amount of sunlight entering the cooling tower thereby impeding ...
-
Manufactured by ScaleBuster - Ion Enterprises Ltdbased in UNITED KINGDOM
The EnviroTower cooling tower water treatment solution optimizes energy and water efficiencies while minimizing environmental impacts. Cooling towers represent up to 30% of a building’s overall energy budget, and 50% of the water used. The EnviroTower solution helps commercial, institutional and industrial facilities significantly ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Different Types For All Requirements – Available In PVC And PP; From small cooling towers to large cell and natural draught cooling towers: Our PLASdek packings fulfill all requirements. Different types of film fills with large specific surface are highly suited for clean and medium water qualities, whereas for special operation ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. The 2H NET 150 grid packings are ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
in the cooling circuit to prevent the formation of deposits and bacterial growth, 2H SANIPACKING drift eliminators serve to minimize the risk of infections from legionella ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H PLASdek and CLEANdek vertical flow fills are designed for the use in counterflow cooling towers with poor water quality. With different types in PP, PVC and PPHT and different material thickness, our fills cover all customer requirements. Fill media in flame retardant or anti-bacterial types are available on request. 8earing capacity and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you