We couldn't find any cooling tower equipment suppliers or service providers located in District of Columbia

Here is a list of equipment results with suppliers serving District of Columbia

Cooling Tower equipment available in District of Columbia

  • Showcase

    Myron L - Model CTCII™ - Conductivity/TDS Chemical Treatment Controller / Cooling Tower Controller

    The unique circuitry of the CTCII Chemical. Treatment Controller guarantees accurate and reliable measurements. Drift free performance is assured by “field proven” electronics, including automatic DC offset compensation and highly accurate drive voltage.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA). from In-Line Water Testing Monitor / In-Line Water Testing Controllers Product line

  • Premium

    Brentwood AccuSpray - Nozzle Use in Counterflow Cooling Tower

    The Brentwood AccuSpray Nozzle is designed specifically for use in counterflow cooling tower applications. Its unique spray pattern maximizes uniformity of water dispersion while maintaining low operating pressures. In addition to being an efficient, non-clogging nozzle, AccuSpray is durably constructed of polypropylene for strength and extended ...

    By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Counterflow Solutions - Nozzles Product line

  • Premium

    Evapco - Model LSTE - Cooling Tower

    The LSTE is a forced draft, centrifugal fan design cooling tower with a capacity range of 33 to 1,300 nominal tons (147 to 5715 kW). Standard construction consists of G-235 (Z725-Europe) galvanized steel with type 304 stainless steel available for the basin or the entire tower.

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model SUN - Cooling Tower

    The World's Only CTI Certified Cooling Tower Capable of NET ZERO Annual Energy Consumption! Under typical North American solar exposure and commercial HVAC loading conditions, the SUN tower is capable of offsetting 100% of annual fan energy consumption with its strategically located solar panel array. During periods of solar power generation, the ...

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model Ultra-SST - Cooling Tower

    Independently certified to withstand seismic and wind load forces at ALL Building locations in North America. The Ultra SST is a type 316/304 stainless steel, induced draft, counterflow design cooling tower with a CTI certified capacity range of 109 to 4,995 nominal tons (479 to 21,960 kW). Standard construction consists of type 316 stainless ...

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model LPT - Cooling Tower

    The LPT is a low noise, low height, forced draft, centrifugal fan design cooling tower with a capacity range of 27 to 331 nominal tons (119 to 1455 kW). Standard construction consists of type 304 stainless steel cold water basin and G-235 (Z-725 Europe) galvanized steel casing with all type 304 stainless steel construction available.

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model AXS - Cooling Tower

    The AXS puts a new spin on induced draft, crossflow cooling towers with a CTI certified capacity range of 312 - 1,357 nominal tons. Standard construction consisits of G-235 galvanized steel with type 304 or 316 stainless steel availiable for the basin or entire tower. All models are CTI Certified and IBC Compliant.

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model UT - Cooling Towers

    Independently certified to withstand seismic and wind load forces at ALL Building locations in North America. The UT is an induced draft, counterflow design cooling tower with a CTI certified capacity range of 112 to 4,995 nominal tons (493 to 21,960 kW). Standard construction consists of G-235 (Z-725 Europe) galvanized steel with type 304 or 316 ...

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model cAT - Cooling Towers

    Designed to provide the maximum capacity with the lowest ocean shipping cost. The cAT is an induced draft, counterflow design cooling tower with a capacity range of 173 to 472 nominal tons (762 to 2,079 kW). Standard construction consists of G-235 (Z-725 Europe) galvanized steel with type 304 or 316 stainless steel available for the basin or the ...

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Evapco - Model AT - Cooling Tower

    Independently certified to withstand seismic and wind load forces at ALL Building locations in North America. The AT is an induced draft, counterflow design cooling tower with a CTI certified capacity range of 33 to 5,141 nominal tons (144 to 22,596 kW). The largest AT tower - the 14'x26', dual fan 'Big AT' is rated for up to 1,332 nominal tons ...

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Factory Assembled Cooling Towers Product line

  • Premium

    Smart Shield - Cooling Towers

    Factory Assembled and pre-piped skids simplify installation and commissioning. Complete water treatment package designed for your cooling tower system requiring minimal mechanical room space. Includes service by network of Factory Authorized Service Partners. Solid chemistry reduces shipping, handling, and storage.

    By Evapco Inc. based in Taneytown, MARYLAND (USA). from Water Treatment Systems Product line

  • Premium

    TurbEx - High Efficiency Compact Fluid Bed Cooling Towers

    TurbEx Cooling Towers offer:1) Lowest Approach & Range Temps bellow 1ºC2) 25% Volume of Traditional Cooling Towers3) Fouling Free Operation - Can Operate on Slurries4) Biofilms Constantly Removed by Self Cleaning

    By Fluid Technologies (Environmental) Ltd. based in Kingston upon Thames, UNITED KINGDOM.

  • Premium

    WEDA - Model YT-600 - Remote Controlled Sediment Removal Vehicle for Cooling Towers etc.

    YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs. The powerful on-board submersible pump and wide nozzle allows forefficient cleaning of large bottom surfaces.

    By Weda AB based in Södertälje, SWEDEN. from Water & Services Sector Product line

  • Model CTFP Series - Cooling Towers

    CTFP Series cooling towers can be forced or induced draft, both versions with axial fan directly coupled to the motor and counter flow.. These towers are built with a resistant structure, support thick steel (3-5 mm) hot dip galvanized (after the realization of all the conformation works) and lateral panels of fibreglass reinforced polyester.

    By Torraval Cooling S.L based in ZAMUDIO (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Delta Cooling - Anti-Microbial Cooling Towers

    Anti-Microbial (AM) Cooling Tower. According to test results from Special Pathogens Laboratory, The Legionella Experts®, our tower displays the only Anti-Microbial Activity against Legionella bacteria out of all the common cooling tower materials.

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • Model PME-E Series - Cooling Towers

    The PME-E series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hot-dip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large ...

    By Torraval Cooling S.L based in ZAMUDIO (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Model PMS-D Series - Cooling Towers

    PMS-D Cooling towers are built entirely in fiberglass (orthophthalic polyester resin, reinforced with several layers of glass fibre matting) in order to avoid corrosion problems due to the fact that the tower is constantly in contact with water and it is exposed to all kinds of weather. the structure is self-supporting and strengthened at the ...

    By Torraval Cooling S.L based in ZAMUDIO (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Model CV Series - Cooling Towers

    Cooling Towers Torraval CV type are atmospheric refrigerants of forced draft in counterflow and centrifugal fan. It is modular structure equipment which compact design, combined with any fan type, gives it a low noise level which makes this series suitable for air conditioning installations in hotels, hospitals or public buildings as they comply ...

    By Torraval Cooling S.L based in ZAMUDIO (Vizcaya), SPAIN. from Field Erected Cooling Towers Product line

  • Model HBR Series - Cooling Towers

    HBR series is the result of the long experience of MITA technicians. It combines the well-known TORRAVAL’s distinguishing feature of corrosion-free products with an easy and innovative working principle,designed to reduce water and energy consumption to a minimum.. The distinctive characteristic of the HBR hybrid cooler is that it has two ...

    By Torraval Cooling S.L based in ZAMUDIO (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Model PMM Series - Cooling Towers

    PMM are open circuit cooling towers of counter-flow composed of factory pre-assembled modules. Its capacity goes from 2.6 to 14 MW (aproximate value, taking as a reference a cell, a thermal range of 5ºC, laminar filling of 19 mm and modular systems). The PMM series is proposed in big-size plants. Each unit is engineered according to the ...

    By Torraval Cooling S.L based in ZAMUDIO (Vizcaya), SPAIN. from Field Erected Cooling Towers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you