Cooling Water Pumping Equipment Near Luxembourg
-
Manufactured by Friess GmbHbased in GERMANY
Do you have oil in small emulsion tanks, cooling water basins or pump sumps? If the surface area is up to 1 m², the Model 1S from Friess can ...
-
Manufactured by Cat Pumpsbased in USA
liquids such as DI water and cooling when pumping high temperature liquids. CAT PUMPS is the exclusive manufacturer of flushed pumps for DI water gas turbine inlet fogging systems. These flushed pumps also handle high vapor liquids and provide containment of liquids for a safe ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
of gate valves, gas purge, back-fill systems and co-ordinated control of roughing pump with the turbo-molecular high vacuum ...
-
Manufactured by Waltron Bull & Roberts, LLC.based in USA
to measure absorbed and scattered light in a sample stream, and distinguishes between oil droplets and turbidity, calculating the oil concentration based on the sensor signal. The analyzer monitors continuously and activates alarms and relays as necessary. Applications include: boiler condensate returns, process cooling water, process steam monitoring, ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The DWM 1000 is a 2-wire electromagnetic flow controller to monitor the flow of conductive liquids, pastes and slurries. The switching point of this insertion-type device is adjustable over a full-scale range of 0.1 …9.9 m/s or 0.3…32.5 ft/s. A welding socket is supplied as standard for welding the DWM 1000 directly onto process pipes (DN50…400 / 2…16"). The long ...
-
Manufactured by technotrans solutions GmbHbased in GERMANY
Increasing energy-efficiency and reducing costs – those are the primary objectives in ...
-
Manufactured by Weinreich Industriekühlung GmbHbased in GERMANY
With closed system for tempering of oil-circuits up to 140, 200, 300 or 350°C. Weinreich oil-temper devices mark themselves through serviceability, ease of use and generous dimensioning of the cool-heat exchanger for power reserve when dirty owls lighting loading of the integrated from heating rods. ...
-
Manufactured by DWA GmbH & Co. KGbased in GERMANY
capacity to the respective requirement.Those intelligent settings of the water-cooled submersible pumps provides a maximum economy at minimized ...
-
Manufactured by DWA GmbH & Co. KGbased in GERMANY
The modula S grants optimum safety and reliability. Due to economical construction and smoothness, the system can be used near treatment stations. The development goal of the modula S was to attain a well balanced high economical and technical standard. The high level of easy serviceability and the reduced water consumption – ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
for other applications like cooling water pumping stations at lower ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
The process and transfer pump of ZM design was developed for stringent demands. This horizontal pump with double suction impeller and a between bearing design is perfect for petrochemical applications as it is constructed under the API standards. It can also be used for other applications like cooling water ...
-
Manufactured by Ruhrpumpen GmbHbased in GERMANY
for other applications like cooling water pumping stations at lower ...
-
based in GERMANY
The EST qualifies for harsh applications generating reactive chemical by-products. It manages large gas loads and enhanced powdery by-products. The compact design allows for increased operating temperatures and corrosion resistant material. Water-cooled EST dry vacuum pump for powdery, corrosive ...
-
based in GERMANY
Water-cooled dry vacuum pump ESR with superior corrosion resistance. The ESR is perfect for medium to harsh applications with low ultimate pressure. The variable pumping speeds ensure a highly flexible usage. Low noise level and low vibration are key features of the ESR ...
-
Manufactured by Caterpillarbased in USA
Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3304B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3304B engines include gas lift, gas gathering, and wellhead gas compression. Cat ...
-
Manufactured by Lagersmitbased in NETHERLANDS
The Liquidyne 3-Stage Vacuum seals the pump and uses an external flush to lubricate, cool and clean the seal. This water flow also enables the Condition monitoring function. The third lip seal is placed in such a way placed to hold a water column up to 8 metres. Do you work with vertical water ...
-
Manufactured by Lagersmitbased in NETHERLANDS
The Liquidyne 2-Stage seals the pump and uses the (cooling) water from the pump to lubricate and cool the seal. This water flow also enables the Condition Monitoring feature. Are you pumping relatively clean (cooling) water? For up to 40 bar ...
-
Manufactured by SINGLE Group GmbHbased in GERMANY
The WP5 is one of the core pieces of the Single water temperature control units. The WP5 units are available in a wide performance range of 90°C / 150°C / 180°C and 200°C, and with almost unlimited options. Whether for injection moulding, extrusion or numerous other applications, the WP5 series can be used universally. ...
-
Manufactured by CECO Environmentalbased in USA
Each Dean Pump brand RWA Series Air Cooled Hot Water Pump is designed for heavy duty and high temperature applications, providing efficient, reliable and dependable service for your specific application needs and meeting environmental standards. The RWA Series pump is utilized for hot water, ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
This feeds the backwash spray-water pipes of the rotating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you