Corrosion Protection Coating Equipment Near Poland
-
Manufactured by Bray International, Inc.based in USA
The Series 20/21 resilient seated butterfly valve surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. Bray's Series 20 valve is a wafer version with flange locating holes, and the Series 21 is the companion lug version for dead-end service and other flange requirements. Sanitary & Chemical applications. One-piece disc/stem. ...
-
Manufactured by M-ROL Sp. z o.o. Sp. K.based in POLAND
Plastic mixers are used to mix plastic or granules. The devices are used in the processing of plastics. The moving part of the mixer is mounted in roller bearings. The whole structure is protected against corrosion by a coat of varnish. We offer many types of mixers with a capacity from 500 kg to 5000 ...
-
Manufactured by Aeon International Ltdbased in UNITED KINGDOM
Extension Spindles can be used on AEON type A and type B Valves, Different lengths of Extension Spindles available on request, Anti-corrosion protection - bituminous coating, zink ...
-
Manufactured by ANTICOR Sp. z o.o.based in POLAND
A four-ply laminate, made with 2 layers of aluminium foil (core & outer layers) and 2 layers of polyester film, coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick. at normal temperatures with superior low temperature performance below freezing. The construction of this ...
-
Manufactured by Meden-Inmed Sp. z o.o.based in POLAND
Bryza is dedicated to conduct a therapeutic procedure using water massaging properties and temperature. Appropriately arranged water jets, spray water under high pressure, massaging the patient’s body ...
-
Manufactured by Tip Top Oberflachenschutz Elbe Gmbhbased in GERMANY
Corrosion protection in steel hydraulics construction is becoming more and more important. Steel hydraulics construction like water turbines, penstocks, cooling water pipes, pumps, ship hoists, watergates, sheet pile walls, or offshore facilities have to withstand a high amount of corrosive influences as well as mechanical stress. ...
-
Manufactured by PREFA Aluminiumprodukte GmbHbased in AUSTRIA
The aluminium composite panel consists of two aluminium sheets which are fusion-bonded to both sides of a polyethylene core. Through the equal measure of chemical bonding and mechanical fastening, this combination is particularly robust. In this way, the aluminium composite panel ensures consistent evenness and stability, even on large-scale ...
-
Manufactured by LACONT Umwelttechnik GmbHbased in GERMANY
For the transport of water-endangering and flammable liquids; Base sump tray made from 3 mm sheet steel. Base sump tray according to WHG - U-sign according to Stawar. Removable galvanized grid. Corrosion protection by primer coating and painting or by fire-galvanization. Equipped with 2 fixed and 2 swiveling castors and push bar as ...
-
Manufactured by LACONT Umwelttechnik GmbHbased in GERMANY
For the storage of water-endangering liquids; Base sump tray made from 3 mm sheet steel. Base sump tray according to WHG - U-sign according to StawaR. Ground clearance 100 mm for internal transport. Lockable versions also suitable for storage outdoors. Sump capacity 220 liter. Corrosion protection by primer coating and painting of sump ...
-
Manufactured by LACONT Umwelttechnik GmbHbased in GERMANY
For the storage of water-endangering and fl ammable liquids. Made from 3 mm sheet steel. Removable galvanized grid. Ground clearance 100 mm for internal transport. Corrosion protection by primer coating and painting or by fire-galvanized sheet steel. PE inserts are available for all models for the storage of acids and ...
-
Manufactured by ERHARD GmbH & Co. KG - Talis Groupbased in GERMANY
The newest generation of double eccentric butterfly valves with flow-optimized "Wave" design ensures minimized pressure losses and high energy-efficiency. Polygon connection of shaft and disc provides uninterrupted corrosion protection and optimal torque transmission at the same time. Use of slider crank gearbox allows safe operation of ...
-
Manufactured by Düker GmbH & Co. KGaAbased in GERMANY
For Temperature: up to + 40 °C. Area of application water: for drinking water EN 1074 part 1 and part 2. Area of application gas: for all gases according to DVGW publication G ...
-
Manufactured by Tröger + Entenmann Hydromaten KGbased in GERMANY
The standard HYDROMAT is a completely enamelled valve assembly. The outer surface of the housing has a primary enamel coating and a rugged, impact-resistant 2K epoxy resin enamel surface coating. The interior of the housing and the valve disk are coated with impact-resistant enamel. According to requirements and condition of the medium or ...
-
Manufactured by AB Valves GmbHbased in GERMANY
Product group : Gate Valves (GV)، Fields of application : Power house، Water treatment، Water Distribution network، Water transmission، Irrigation، Industrial applications، ...
-
Manufactured by Ebitt Fluid Technologiesbased in HUNGARY
Materials: Pump Housing and Lantern: Cast Iron. Impeller: Reinforced Glass PPO up to b,S kW (not included). Cast Iron: 5,5 kW- 7,5 kW. Mechanical Seal: AQ1LGG. Shaft: X20Cr ...
-
Manufactured by IBS GmbHbased in GERMANY
or coated black steel. Single-wing flood protection doors are offered in standard sizes of up to 2.5 m x 2.5 m and are designed to withhold floods up to 4 m above the threshold. ...
-
Manufactured by Güntner (UK) Limitedbased in GERMANY
The Cubic COMPACT Air Cooler is designed for high efficiency while boasting a cubic design to fit perfectly into medium-sized cold rooms like in supermarkets or catering businesses. It also boasts quick and easy installation and a 3-year warranty as standard. This model is kept in stock to ensure quick ...
-
Manufactured by Güntner GmbH & Co. KGbased in GERMANY
Designed for long rooms with high air change rates, the Dual COMPACT Air Cooler distributes air towards both directions from the centre of the room – an ideal cooling solution for rooms with constant coming and going like delivery zones, pre-cooling rooms, and picking areas – where the air constantly escapes and temperature levels will vary. It also boasts quick and easy installation ...
-
Manufactured by Güntner GmbH & Co. KGbased in GERMANY
The Cubic COMPACT Air Cooler is designed for high efficiency while boasting a cubic design to fit perfectly into medium-sized cold rooms like in supermarkets or catering businesses. It also boasts quick and easy installation and a 3-year warranty as standard. This model is kept in stock to ensure quick ...
-
Manufactured by Güntner (UK) Limitedbased in GERMANY
Designed for long rooms with high air change rates, the Dual COMPACT Air Cooler distributes air towards both directions from the centre of the room – an ideal cooling solution for rooms with constant coming and going like delivery zones, pre-cooling rooms, and picking areas – where the air constantly escapes and temperature levels will vary. It also boasts quick and easy installation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you