Corrosion Testing Equipment Available In Italy
-
Manufactured by Amar Equipments Pvt. Ltd.based in INDIA
Of the numerous applications of high-pressure autoclaves, electrochemical corrosion testing at high temperature and high pressure is most favored using Amar make pressure reactors. These are custom-designed using corrosion coupon handles and coupon holders as per client ...
-
Manufactured by Shanghai Morningtest Environmental Chambers Co., Ltd.based in CHINA
Salt spray test chamber is the most reliable equipment for checking corrosion resistance of surface coatings when exposed to a salt-laden environment. ...
-
Manufactured by Pure Air Filtration, LLCbased in USA
PureAir’s Corrosivity Test Kit consists of a strip of silver and copper which is hung in the applicable room for 30 ...
-
Manufactured by Hach - Veraltobased in USA
Corrosion Management Test Kit a Water Quality Multi-Parameter Kit - Model CM-1: To reduce lead and copper levels in distribution, service and domestic water lines, suppliers must stabilize aggressive water by adjusting pH, temperature, and hardness. Analysts can verify the success of their stabilization by screening samples with the CM-1 ...
-
based in USA
Metal Samples offers corrosion test racks used to mount coupons and secure them directly to operating equipment or within a process system. Corrosion test racks make it easy to evaluate how corrosion would effect differing alloys and material finishes under identical conditions. Rack usage helps eliminate coupon ...
-
Manufactured by CMEbased in INDIA
CME SF-CCT chambers are designed to be flexible enough to comply with as many different CCT specifications as possible. These may be programmed to conduct a whole range of corrosion tests such as wet cycle, dry cycle, controlled humidity as well as the salt spray test in a single chamber. This can occur in any sequence and be ...
-
Manufactured by Equilam NAbased in USA
The cyclic corrosion test chambers series CORR are designed to perform automatic corrosion cycles with the possibility of programming in 9 different ...
-
Manufactured by Shenzhen Worthy Tech Co Ltd.based in CHINA
Basic models, for Prohesion, SWAAT, SO2 and Conventional Salt Spray. These cyclic corrosion test chambers have full features of Salt Spray Chambers, and they are able to perform conventional Salt Spray cycle, and followed by Wetting(SWAAT), Drying(Prohesion) or SO2 cycles. These cycles could be programmed before testing and run ...
-
Manufactured by Shenzhen Worthy Tech Co Ltd.based in CHINA
Advanced CCT models, have full features and extra Controlled Humidity. These cyclic corrosion test chambers have full features of WTC/B models, and they are built with Controlled Humidity function. This is implemented by equipping an Air Pretreat Conditioner inside the chambers. This facility makes the chambers meeting the most ...
-
Manufactured by Equilam NAbased in USA
C.C.T chambers provide the closest comparison to “real world” laboratory testing for naturally occurring corrosion. Designed to meet corporate standards, with Low Temperature (LT) mode up to -20ºC. (Accessories optional: Ultra Low Temperature (ULT) mode: -40ºC). Available volumes: 1,300 – 3,000 – 5,000 ...
-
Manufactured by CM Technologies GmbHbased in GERMANY
Cold corrosion can occur when sulfuric acid condenses on the liner walls. Cold corrosion is a type of corrosion resulting from the condensation of sulfuric acid on the liner walls, degrading the liner surface. CMT has developed a reagent based test to measure the level of corrosive wear. ...
-
Manufactured by Thermotron Industriesbased in USA
Thermotron’s Automated Corrosion Test Chambers combine the capabilities of a temperature humidity chamber and a salt spray chamber. Corrosion Chambers eliminate the need to manually transfer products from one environmental chamber to ...
-
Manufactured by BOTO Group Ltd.based in CHINA
Introduction: Salt Spray Tester is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their ...
-
Manufactured by DongGuan ZhiXiang Experimental Equipment Co.,Ltd.based in CHINA
Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the ...
-
Manufactured by Symor Instrument Equipment Co., Ltdbased in CHINA
Salt Spray Corrosion Test Chamber tests products’ protective layers’ resistance to salt spray corrosion, the chamber is widely applied on the enclosure of electronics, metal materials and industrial products, the chamber is made by imported reinforced PP plates, which are aging resistant, ...
-
Manufactured by Xian LIB Environmental Simulation Industrybased in CHINA
Salt spray test chamber is used to test the anti-corrosion quality of all the materials surfaces of painting, coating, electroplating in condition of salt spray environment. Basic salt spray test chambers meet ASTM, ISO, IEC and other International Standards test methods, capacity available in 108L, 320L, 410L, ...
-
Manufactured by Equilam NAbased in USA
Ammonia Corrosion Test Chamber for Testing IEC 62716:2013 – To simulate Agricultural Environments testing Photovoltaic(PV) modules against corrosion. Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure during their lifetime. Highly corrosive wet ...
-
Manufactured by QCAL Messtechnik GmbHbased in GERMANY
Gas Dosing units for sulfur dioxide and other gases – designed for corrosion tests according to test procedures as for example : DIN EN ISO 6988, DIN 50018 ( Kesternichtest ), DIN EN ISO 3231, mixed flowing gas testing IEC 60068-2- 60 and IMO DE53/WE.2. These units can provide gas atmospheres for high and low concentration ...
-
Manufactured by Erichsen GmbH & Co. KGbased in GERMANY
The HYGROTHERM 519 is state-of-the-art technology. The operating and control operations are minimized or automated. With its large 300-litre, standard-compliant test chamber made of acid-resistant and heat-resistant plastic, the HYGROTHERM 519 is also ideally suited for continuous testing and quantity tests. The extended HYGROTHERM 519 SA ...
-
Manufactured by Erichsen GmbH & Co. KGbased in GERMANY
With the button below you can add products to a cart if you want us to do a quote for this product. The HYGROTHERM 519 is state-of-the-art technology. The operating and control operations are minimized or automated. With its large 300-litre, standard-compliant test chamber made of acid-resistant and heat-resistant plastic, the HYGROTHERM ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you