Showing results for: Cone Penetration Test Equipment Equipment Available In Europe
-
Manufactured by A.P. van den Bergbased in NETHERLANDS
By incorporating the patented ST-Rods in the ROSON seabed system, a compact and easy to handle ROSON-ST is created. It is suitable for 50 m penetration of 40 mm rods, works with all Icone sizes and click-on modules and does not require any exterior CPT string support, assuring fast deployment and high productivity. The use of standard 40 mm ...
-
Manufactured by A.P. van den Bergbased in NETHERLANDS
The various ROSON systems come with an electric driven winch with self-tensioning for heave compensation. A CPT depth up to 50 m is feasible. Data communication from the ROSON to deck level is achieved by a powerline connection through the umbilical. This is realized by a transducer at both ends of the umbilical. These transducers, called Icone Powerline Adapters, convert the Icone signal to a ...
-
Manufactured by A.P. van den Bergbased in NETHERLANDS
The DW (Deep Water) ROSON, with its proven wheel drive CPT system, is provided with technology to perform CPT’s and samples in harsh offshore conditions at ultra-deep waters. The DW ROSON is unrivalled in the ...
-
Manufactured by A.P. van den Bergbased in NETHERLANDS
For water depths between 30 and 300 m the near-shore ROSON is a suitable solution. This ROSON is available with 50 kN, 100 kN or 200 kN pushing force. To avoid the investment in a self-tensioning winch, data communication runs over a free hanging cable to the Icontrol data logger. At water depths up to 30 m a jack-up barge or pontoon is often used. As long as the influence of currents and the ...
-
Manufactured by Vertek a Division of ARAbased in USA
The HT DataPack is a field portable Cone Penetrometer Test (CPT) data acquisition and analysis package which works with all digital HT cones. Developed as a simple ‘all-in-one’ solution for the Geotechnical CPT service providers, this version incorporates USB for ease of connectivity. ...
-
Manufactured by Vertek a Division of ARAbased in USA
in one test. Groundwater problems could include corrosive soils, salt water intrusion or environmental contamination. Any soil contaminate that has a typical electrical conductivity higher than that of water can be ...
-
Manufactured by Vertek a Division of ARAbased in USA
’s 10 conductor cable with LEMO type connectors ensures reliable data transmission with each penetration test. ...
-
Manufactured by Vertek a Division of ARAbased in USA
stable readings during testing. The cone tip, sleeve (local friction element), and pore pressure element (filter) are easily and quickly changed when necessary by the operator. ...
-
Manufactured by Vertek a Division of ARAbased in USA
Vertek’s patented Soil Sampler is built for reliable, cost-effective retrieval of soil samples in difficult geologies and is designed to be deployed by most common CPT equipment. ...
-
Manufactured by Vertek a Division of ARAbased in USA
To meet the growing needs of various contractors and state and federal agencies Vcrtck offers our self grouting tools which allow grouting of CPT holes while removing the rods. Vertek offers two types of grouting tools to fit your ...
-
Manufactured by Vertek a Division of ARAbased in USA
Contamination Confirmation Visual In-Situ Screening Vertek’s Video Module provides a view of the soil in real time, allowing the user to visually detect or confirm the presence of subsurface contaminants (hydrocarbons, NAPL) and sedimentary structures. The Video Module also shows soil texture, grain size, color, moisture and other features, reducing the need for expensive and time consuming ...
-
Manufactured by Vertek a Division of ARAbased in USA
Vertek’s DataPack 2010 is a field portable Cone Penetrometer Test (CPT) data acquisition and analysis package combining the capabilities of our digital CPT cones, the FFD (Fuel Fluorescence Detector) probes, seismic geophone equipped cones, and other specialized Vertek probes. Developed as a simple ...
-
Manufactured by Vertek a Division of ARAbased in USA
’s 10 conductor cable with LEMO type connectors ensures reliable data transmission with each penetration ...
-
Manufactured by Vertek a Division of ARAbased in USA
strain guage transducers, with the cone electronics packaged directly behind the transducers. In all configurations the cone channels are temperature compensated to provide stable readings during testing. The cone tip, sleeve (local friction element) and pore pressure element (filter) are easily and quickly changed when ...
-
Manufactured by Vertek a Division of ARAbased in USA
This specialized light duty cone is designed for shallow investigations typically associated with agricultural, education and laboratory controlled tests. The operator can achieve combined data collection inclusive of geotechnical properties and SMRT measurements in a single integrated probe. Communicates with a specialized data ...
-
Manufactured by Vertek a Division of ARAbased in USA
Simultaneous In-line Sampling -The Vertek ConeSipper module attaches directly behind a standard CPT cone to obtain gas or water samples as the CPT probe is advanced, saving substantial money and time by eliminating duplicate soundings. Developed and patented by Westinghouse Savannah River Corporation (WSRC) and Applied Research Associates, ...
-
Manufactured by Vertek a Division of ARAbased in USA
Soil Moisture/ Resistivity – Soil moisture, or the volumetric percentage of water in soil, has become an important consideration in the design of environmental re mediation processes and agricultural planning, and it is one of the most fundamental factors influencing soil strength. VERTEK’s Soil Moisture/Resistivity (SMR) Module provides real-time, in-situ logs of soil moisture and ...
-
Manufactured by APAGEObased in FRANCE
The PANTHER Tracked Cab Penetrometers are manufactured to the desired reaction force (100 to 200 kN), on a reinforced chassis based on a high quality carrier offering extremely low ground pressure (far superior to truck or even tracked truck models). They allow CPT tests to be carried out in difficult terrain and difficult to access sites, ...
-
Manufactured by APAGEObased in FRANCE
The FOX100 portable 100 kN penetrometer is the low-cost model in the range of static penetrometers for mechanical and electrical CPT testing. It is the ideal machine to start a basic geotechnical activity with a limited budget. Its small footprint and modularity also allow it to be used in confined areas. This penetrometer is a reliable, ...
-
Manufactured by A.P. van den Bergbased in NETHERLANDS
The CPT Crawler provides the same high production rates and reliability as the CPT Truck, with the advantage of tracks for better manoeuvrability in rough or soft terrain. The crawler is the only option at sites where the maximum allowed height is limited. Of course a separate carriage is required for transport of the crawler. The twin-cylinder HYSON 200 kN can be built on a 15 tons crawler which ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you