Current Meter Equipment Available In Saskatchewan
-
PremiumManufactured by General Oceanics Inc.based in USA
The Mavs Current Meter is a true 3 axis Acoustic Current Meter which employs a differential travel time measurement technique. The current meter takes measurements across 4 acoustic axes to provide a true vector averaged velocity measurement. Programmable burst mode and triggered sampling provide ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The optimal solution to measure directional waves, currents and water quality in one instrument. The SeaGuardII DCP Wave is a 600kHz Doppler Current Profiler able to measure directional wave parameters and currents from a bottom mounted installation. The Acoustic Wave software 5759 used by the DCPS implements unique features to improve the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The instrument is used for the accurate determination of the current velocity in water ways, channels, rivers and the sea. The meter can also be applied in polluted water currents. The measurements are executed with the propeller mounted on the rod(s) or connected to a cable. The current velocity meter has a ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
A self-recording dedicated current meter with Bluetooth for communications and data retrieval - now with the possibility to integrate a pressure sensor! The RCM Blue is a self-recording Current Meter which also measures water temperature in salt or fresh water, and a battery container with battery capacity up to ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The single-point current meter series are a completely new generation of current meters based on the SEAGUARD® datalogger platform and the ZPulse® multi-frequency Doppler Current Sensor (DCS). SEAGUARD® Products are based on modern technology and are the basic modules of our underwater observatory. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Flowmeter, digital, mechanical, w/standard rotor response with the standard rotor-threshold approximately 10cm/sec (1/5 knot). Range 10cm/sec (1/5 knot) to 7.9m/sec approximately (15 knots) weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8") ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The SeaGuard DCP (Acoustic Doppler Current Profiler) measures currents and can be extended with wave direction, oxygen, conductivity, turbidity, temperature, and serial ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The mini current meter with one aluminium propeller is used in small ditches, with low water levels. Measuring range 0.03 to 2.5 m/sec. The instrument is included in a complete set. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
The rack is for use with SEBA and OTT current meters (9 mm o.d. pins) during flow measurements in streams and rivers. The rack consist of a movable part with a stirrup for holding the current meter and a fixed part with a foot and a centimeter graduated scale (5 cm indications). By operating the spring loaded handle, the ...
-
Manufactured by Aquadatabased in TURKEY
The AKIM Universal Current Meter CM-32 is a measuring instrument to determine the flow velocity of water in open canals, rivers, streams, rivulets, pressure pipes, lakes, and the sea. For measuring flow velocities from 0,025 m/sec. to 12 m/sec. High accuracy Low starting speed of 0,025 m/sec. Application of absolutely and anti-corrosive ...
-
Manufactured by AKCPbased in THAILAND
Typical current transformers require access to a single live wire. The Contactless Current Meter (CCM) does not need any splitting of cables, needs no electrician to install and is completely non invasive. With an accuracy of +/-5% (on factory calibrated cable) and +/- 10% on in field calibrated cables, the CCM gives sufficient accuracy to ...
-
Manufactured by Gelco Electronics Pvt. Ltd.based in INDIA
Weight (kg): 0.278. Length (cm): 12. Width (cm): 6.5. Height (cm): 10. ...
-
Manufactured by Kisters AGbased in GERMANY
The OSS-PC1 miniature current meter is a ?eld-proven instrument for measuring the velocity of water in shallow open and closed channels. It is used for point measurements of ?ow velocities on the water surface or in vertical pro?les down to the riverbed at ?ow speeds of 0.025 m/s to 6 ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
A low cost, lightweight alternative to larger flow meters, ideal for use in applications where the superior durability and depth rating of Valeport's larger meters is not necessary. Utilising the standard Valeport 125mm diameter impeller, the Model 106 features speed and direction parameters as standard, with further options of ...
-
Manufactured by Aquadatabased in TURKEY
Small Current Meter is used worldwide for its proved quality, precision and reliability in measuring low water level. It is especially recommended for measurements in remote regions whenever a lightweight and handy measuring instrument is required. Small Current Meter provides solutions for all velocity measuring applications. ...
-
Manufactured by Micrometrix Corpbased in USA
Streaming Current Monitors (i.e. SCM/SCD) have demonstrated the ability to optimize coagulant dosing and prevent plant ...
-
Manufactured by Kisters AGbased in GERMANY
The OSSB1 universal current meter is a field-proven instrument for measuring the velocity of water in open and closed channels. It is used for point measurement of flow velocity in vertical profiles and covers a flow velocity range from 0.025 to 10 metres per ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Flowmeter, digital, mech., low velocity response with the low velocity rotor-threshold approximately 6cm/sec (3/25 knot). Range 6cm/sec (3/25 knot) to 100cm/sec approximately (2 knots) flowmeter, digital, mech., low velocity weight in air 225 grams (8 ounces) weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8') diameter: standard rotor 6.98cm (2 3/4') low velocity 16.5cm (6.5'), depth rating unlimited (free flooding) data display: 6 ten digit counter wheels 000,000 to 999,999 distance determined by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you