Data Acquisition Equipment
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
The MRL-IE is a compact data acquisition module designed to acquire, process and transmit all sorts of environmental data.It is compatible with all sensors offered by SOMMER Messtechnik and numerous third-party devices equipped with analogor SDI-12 interfaces. The MRL-IE extends the input ports of MRL data loggers and offers conversion between ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
Flushing device used for data acquisition through the level of contamination on the pipe section. Using the data to determine state-oriented flushing intervals. Flushing strategy saves resources, time and cost. Joint development of FAST and TZW. FAST: flushing device, hardware, and data acquisition. TZW: ...
-
PremiumManufactured by KISTERSbased in GERMANY
The iRIS 150FX is a small, compact datalogger featuring an LCD display and keypad. It can be connected to a wide variety of sensors, and features two analogue (0-5 V, 0-20 mA) inputs, two digital inputs, SDI-12 serial instrument support and a single digital output for alarm or control ...
-
PremiumManufactured by KISTERSbased in GERMANY
The iRIS 270 is the perfect marriage of the proven iRIS design legacy with a future-proof architecture. It is compact, cost effective, ruggedized, IP-capable and easily con?gured - and due to its dual telemetry slots the iRIS 270 extends the telemetry options and the range of pluggable ...
-
PremiumManufactured by KISTERSbased in GERMANY
The ML-IoT/W data logger turns a TB7 tipping bucket rain gauge into an IoT precipitation monitor. The low-cost and low-power device including its antenna ?ts easily inside the TB7 enclosure. The ML-IoT/W collects the pulses from the rain gauge, accumulates them over a user-de?ned interval and sends periodic rain reports via WiFi ...
-
Manufactured by VIacousticsbased in USA
2 analog input channels/2 analog output channels, 24 bit, 204.8 kHz sampling; 118 dB dynamic range, 6 Analog Input Gain ranges from +/-316mV to +/- 42V, Software selectable IEPE signal conditioning (4 or 10 mA), NIST Traceable Calibration, Installs in PXI expansion chassis such as PXIe-1073 or PXIe-1082 for high channel count applications, The National Instruments PXI-4461 is used in systems that ...
-
Manufactured by Blackrock Neurotechbased in USA
The CerePlex Direct is a cost-effective data acquisition system that delivers unprecedented low-noise neural signal recording in a simple, plug-and-play ...
-
Manufactured by ATRAD Pty Ltd.based in AUSTRALIA
ATRAD data acquisition systems consist of a Linux-based computer fitted with a 16-bit data acquisition software plus separate digital receivers. Data acquisition sub-systems are available for incorporation into a new radar system or to upgrade an existing radar ...
-
Manufactured by Badger Meter, Inc.based in USA
The Badger Meter Model 3700 is a powerful data acquisition system that allows users to log data easily and efficiently. No special software is required to set up the 3700 as most standard web browsers will communicate with it. Meter connections can be made to one of the eight inputs or via the standard modbus ...
-
Manufactured by Geonics Limitedbased in CANADA
For a substantial increase in productivity, particularly over larger areas, multiple EM61-MK2 (or EM61) systems can be configured as a single array, to be towed behind a vehicle. Data collection is supported by the DAS70-ML Data Acquisition System that can receive data from as many as five EM61(-MK2) units and one GPS receiver ...
-
Manufactured by Dobons Technology S.L.based in SPAIN
The Data Acquisition System is a general purpose device. It has eight analog inputs and eight digital inputs that allows monitoring different processes through a PC ...
-
Manufactured by Scotia Instrumentation Limitedbased in UNITED KINGDOM
Most data acquisition systems are complicated for the operator to use. They can require setting up by a skilled technician when transmitters are changed. Using the ScotiaLogger you only require pressure sensors to complete the package. ...
-
Manufactured by Measurandbased in CANADA
Automated data collection for one ShapeArray. DAS-1 (Data Acquisition System) contains a Campbell Scientific CR300, a SAA232, and other components1 required to automate data collection for one ...
-
Manufactured by imc Test & Measurement GmbHbased in GERMANY
The modular design of the DAQ system with its DAQ modules including precision amplifiers and Fieldbus interfaces gives you the flexibility you need for your daily tasks. Synchronously capture a wide variety of signals: analog and digital data, Fieldbus, audio or video data at a total sampling rate of 5 MS/s and process them directly in ...
-
based in USA
The most successful data acquisition system of our industry was designed by Sercel, France. It is called the 428XL Land seismic acquisition system. Over 5,000,000 channels were delivered around the world! The two major building blocks of the field telemetry are the FDU-428 and the DSU3-428. The 428XL system is a conventional cable system, ...
-
Manufactured by KMS Technologies/KJT Enterprises, Inc.based in USA
The KMS-820 Data Acquisition Unit (DAU) is developed for EM (ElectroMagnetic) and micro-seismic applications to obtain subsurface resistivity and velocity structure for oil and gas exploration. It also can be used in general purpose acquisition and long term monitoring services. ...
-
Manufactured by Mount Sopris Instrumentsbased in USA
The hardware incorporates the latest electronic components with embedded systems controlled via the specially developed LoggerSuite windows interface program. The system design philosophy is unique in two respects, firstly it is totally software controlled, and secondly it has been built to accommodate multi-vendor tool types. As standard the OPAL operates all tools using the ALT/MSI QuickLink ...
-
Manufactured by Mount Sopris Instrumentsbased in USA
Mount Sopris offers the most versatile data acquisition system available – the MATRIX™ data logger. Able to accommodate multiple telemetry systems, the MATRIX logger can be used with all Mount Sopris probes, past and present, as well as many 3rd party tools. This versatility, combined with its compact size and dependable ...
-
Manufactured by ChemDAQ, Inc.based in USA
Our data acquisition system (DAQ®) receives real-time data and tracks it from multiple different monitors simultaneously. All monitoring points will be viewable from a single location. The DAQ will organize your data and information in a report format for easy reading and presentation. ...
-
Manufactured by CEM Specialties Inc.based in CANADA
CEMSI has over 25 years of proven and dependable service providing DAS solutions. All CEMS designed and built by CEMSI use a Data Acquisition System that incorporates programmable logic controllers, industrial PC’s, flexible networking architecture and industrial automation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you