datalogger Equipment available in Cuba

Available in Cuba| Near Cuba
467 Results found

We couldn't find any datalogger equipment in Cuba

Here is a list of results available in Cuba

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: datalogger ×

  • Available in: Latin America ×

  • Available in: Cuba ×

Lufft - Model Opus20 THI - Data-collector for Temperature/Humidity

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

For climate monitoring in buildings and the control of all climate-sensitive production processes: in electronic data-processing centres, control cabinets, wind turbines, storage rooms and museums. The Opus20 runs on batteries or powered via USB. Alternatively, you have the possibility to power the device via POE (Power over Ethernet).

Lufft - Model Opus20 TCO - Temperature and Humidity Datalogger - CO2 Datalogger

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

The amount of carbon dioxide had been virtually constant at 280 ppm (particles per million) – i.e 280 gas molecules per million air molecules – the last ten thousand years. However in recent years, this measured value has been increasing rapidly at approx. 2 % per year.

Lufft - Model I-BOX - Gateway for Industrial Measurement - Data Collectors

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

We proudly present you the Lufft I-BOX, the door opener for almost every interface – thanks to app-technology! Measurement processes are always designed following specific measurement tasks. The better all measurement devices are integrated and connected to your company infrastructure, the more efficient the processes are. We designed the ...

OTT - Model netDL 500 and 1000 - Dataloggers for Remote Data Collection & Long Term Water Level Monitoring

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

The versatile OTT netDL 500 and 1000 dataloggers were developed specifically for use in hydrology and meteorology stations. In addition to recording data, the dataloggers are extremely low power and offer flexible data transfer options via the internet and mobile networks, providing a logging and telemetry solution for every project.

Lufft - Model Opus20 THI (Neutral) - Temperature and Humidity Datalogger

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

For climate monitoring in buildings and the control of all climate-sensitive production processes: in electronic data-processing centres, control cabinets, wind turbines, storage rooms and museums. The Opus20 runs on batteries or powered via USB. Alternatively, you have the possibility to power the device via POE (Power over Ethernet).

HORIBA - Model SMA-371 - Datalogger

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only ...

Lufft - Model OPUS 20 THIP (Neutral) - Temperature and Relative Humidity Datalogger

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

Finally available: Lufft’s precise weather station for interior applications. An essential data collector for all calibration laboratories.

Lufft - Model Opus20 THI - Temperature and Relative Humidity Datalogger

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

For climate monitoring in buildings and the control of all climate-sensitive production processes: in electronic data-processing centres, control cabinets, wind turbines, storage rooms and museums. Supplementary description: The Opus20 runs on batteries or powered via USB. Alternatively, you have the possibility to power the device via POE (Power ...

Lufft - Model OPUS 20 THIP - Temperature, Relative Humidity, Air Pressure Datalogger

by G. Lufft Mess- und Regeltechnik GmbH     based in Fellbach, GERMANY

Finally available: Lufft’s precise weather station for interior applications. An essential data collector for all calibration laboratories.

Van Essen Cera-Diver - Pressure transducer with integrated logger

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The ceramic Schlumberger Cera-Diver is designed specifically for monitoring groundwater in potentially corrosive conditions, such as brackish water and seawater.

CR700X Measurement and Control System

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The CR7 is a precision instrument that is primarily used in multi-parameter research and industrial applications. Each CR7 system is individually configured to meet the specific measurement needs of the customer. A control module is the base of the measurement system, then the input/output module, datalogger enclosure, and I/O cards are added. As ...

CR295 GOES Datalogger

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The CR295 Datalogger is optimized for use with the TX312 GOES Satellite Transmitter. A specific port for TX312 communications and a specialized instruction set has been added to the CR295 to provide communication with our GOES satellite transmitter.The CR295 Datalogger is ideal for remote data collection sites where only a few sensors will be ...

EdgeBox - Model V12 - Multi-Purpose Datalogger

by Environmental Measuring Systems (EMS)     based in Brno, CZECH REPUBLIC

12 Voltages, 2 Counters. Two AA batteries, 220k values

EdgeBox - Model V8 - Multi-Purpose Dataloggers

by Environmental Measuring Systems (EMS)     based in Brno, CZECH REPUBLIC

8 Voltages, 2 Counters. Two AA batteries, 110k values.

Model DT80 - Datalogger

by Britannia Test & Measurement Ltd     based in Middlesbrough, UNITED KINGDOM

The DT8x is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT80’s Dual Channel concept allows up to 10 isolated or 15 common referenced analog inputs or for the DT85 32 isolated or 48 common referenced analog inputs ...

Model CR1000 - Measurement and Control System

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The CR1000 is our most widely used datalogger. It can be used in a broad range of measurement and control functions. Rugged enough for extreme conditions and reliable enough for remote environments, it is also robust enough for complex configurations. The CR1000 builds on the foundation of our CR10X dataloggers, and has already been put to use all ...

Van Essen Baro-Diver - Pressure transducer with integrated logger

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Baro-Diver provides reliable automatic measurement and registration of groundwater level and temperature data. Measuring 0.86 inches (22 mm) in diameter and 3.54 inches (90 mm) in length, it is a great choice for virtually any monitoring well. The Baro-Diver is available with a measurement range of 4.92 ft (1.5 m). For each measurement, the ...

Van Essen CTD-Diver - Pressure transducer with integrated logger

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Van Essen CTD-Diver sets the standard for reliability and longevity in groundwater monitoring. The CTD-Diver is a fully stand-alone sensor with built-in data logger and battery. The compact ceramic casing and sensor and unparalleled conductivity measuring range (0-120 mS/cm) make the CTD-Diver suitable for use at every measuring site.

Model CR5000 - Measurement & Control System

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The CR5000 is a rugged, high performance, integrated data acquisition system with a built-in keyboard, graphics display, and PCMCIA card slot. It combines 16-bit resolution with a maximum throughput of 5000 measurements per second. The CR5000 is available with a built-in sealed rechargeable battery base or in a low profile version without ...

DL.OCS/N/RS485

by STS Sensor Technik Sirnach AG     based in Sirnach, SWITZERLAND

- Pressure measuring range: 0…250 mH2O- Total Error: ≤ ± 0.05 % FS (-5...50 °C)- Temperature measuring range: -5…80 °C- Operating temperature: -5…80 °C- Process temperature: -5…80 °C- Interface: RS485- Materials: Stainless steel, titanium-Feature: Battery operation, Measurement interval 1s…24h, 1.5 Mio. Measurement values

Need help finding the right suppliers?

Let the XPRTs do the work for you