Only show results in Connecticut? Ok

debris separator equipment

  • Premium

    Mellegard & Naij - Model MR - Multi-Rake Screens

    Multi Rake MR is a modern mechanically raked coarse bar screen that separates debris and large screenings from water.

    By Hydria Water AB based in Borås, SWEDEN. from Mellegard & Naij - Screens & Fine Screens Product line

  • Premium

    Mellegard & Naij - Model EX - Sludge Reciever

    Sludge Receiver EX is a complete system for separation of debrie & rubbish from sludge & water. Sludge trucks can connect directly to the tank.

    By Hydria Water AB based in Borås, SWEDEN. from Mellegard & Naij - Pre Treatment Units Product line

  • Premium

    Elgin - Side Hill Screens

    Influent Chamber: Sized to distribute spillage over weir while keeping high enough velocity to prevent backup of debris. Baffle Plate: Distributes flow evenly over screen. Includes studs with weights to adjust baffling according to media viscosity. Screen: Cuts bottom layer of water using tilted wedge wire and has removable screen panel for ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Water Intake Product line

  • Premium

    Sebright - Spring Loaded Retainer Systems

    Want to keep your drivers on the road instead of having to clean up spillage during container/compactor separation? Do you have debris falling out of the back of the receiver? Then you need the Sebright Products all new patent pending Spring Load Retainer System!

    By Sebright Products, Inc. based in Hopkins, MICHIGAN (USA). from Waste Compactors Product line

  • Premium

    Ovivo Brackett Bosker - Automatic Raking Screen

    Simple to retrofit into existing installations, the Brackett Bosker Automatic Raking Screen combines a trash rake, conveyor, and a debris loading system directly into a dump skip or trailer. With an open overhead construction to maintain an uncluttered screen deck, it provides simple and fully automatic operation for 24-hour coverage in case of ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Raw Water Intake Product line

  • Premium

    WesTech - Fish Recovery and Return Screens

    The U.S. EPA Clean Water Act Section 316(b) allows for numerous different compliance methods to meet Best Technology Available (BTA) requirements for impingement mortality standards. One of the more cost-effective means of compliance is based on option 5, allowing the owner to “operate a modified traveling screen that the EPA or other ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Intake Screens Product line

  • Premium

    WesTech - Traveling Water Screen

    Traveling water screens are one of the most cost-effective means for fine screening of raw water. They are used in all types of applications where continuous raw water intake screening is required and protection of downstream equipment is critical.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Intake Screens Product line

  • Premium

    Spectro - Model T2FM 500 - Laboratory Ferrography

    The SpectroT2FM Q500 Analytical Ferrography Laboratory is a complete analytical system for the separation and interpretation of wear and contaminant particles in used lubricant oils, hydraulic fluids, coolants and fuels. It consists of the T2FM Ferrogram maker, a bichromatic microscope, video camera and image capture software.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Benchtop Oil Analysis Instruments Product line

  • SEL - Silt Catchpit

    Purpose-built high density polyethylene (HDPE) pre-fabricated catchpit chambers are ideal for stormwater drainage systems. WASP Catchpit chambers are designed to separate silt and other particles, helping to improve the quality of water before it is reintroduced into the environment. They can be integrated into any drainage system requiring ...

    By SEL Environmental Ltd based in Blackburn, UNITED KINGDOM. from Integrated Water Management Product line

  • Oil Skimmer Vessel / First Response oil spill recovery vessel

    The world first Oil Spill Recovery Vessel approved by and international classification bureau (DNV), an unique oil-skimmer that recovers all oil viscosities, including oil mixed with debris, separates oil from debris and debris from water, with a huge capacity- 350 ton/2200 bbls per hour - and handles strong currents and waves up to 1, 5 meters/6 ...

    By Skimmer Technology AS based in Søgne, NORWAY.

  • MION - Cartridge Filter for Liquids

    The cartridge filter for liquids is used to separate liquids from solids such as sludge, granules and dust from any material, even food. This type of filtration is used for a medium to large flow of fluids with high level of impurities resulting from manufacturing processes or drafting of contaminated liquid. The fluid to be purified enters the ...

    By Mion Costruzioni Meccaniche SRL based in Arcade (TV), ITALY.

  • 2620-JE

    This 4-wheel cart with aux. hose reel is ideal for commercial, retail & industrial applications. This unit is also retrofitable to skid mount - ideal for placement in a van or truck. Main Line Jetter - cleans and maintains mainsfrom 10”. This unit has plenty of cleaning action for salt, sand, scale, grease, soap and ice. It has sufficient flow to ...

    By O`Brien - A Product of Hi-Vac Corporation based in Marietta, OHIO (USA). from Cartjetters Product line

  • FibreFlow - Drum Pulper

    The ANDRITZ FibreFlow drum pulper is used for fiber slushing and separation of coarse contaminants for all kinds of recovered paper. High production capacity and low power consumption in a single unit make the FibreFlow drum pulper the preferred choice for continuous pulping. Wastepaper furnishes are de-fiberized by means of continuous turnover ...

    By ANDRITZ Atro GmbH based in Nuernberg, GERMANY.

  • VortiClar Vortex Chambers / Sand Traps

    Claro VortiClar™ forced vortex grit removal systems deliver high grit removal efficiencies across a wide range of daily flow capacities. An engineered hydraulic design removes fine grit and other debris particles, separates organic from inorganic material, and reduces grit accumulation in downstream basins, channels, weirs, and piping. The ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Screening & Grit Removal Product line

  • Gosag - Desanders

    Allgaier Mogensen desanders are used principally for water recovering with bentonite in drilling during foundations are being constructed.These machines separate the debris permitting to reuse bentonite with water that it’s used as pumping medium. Also, it can be used in process where is required the separation by hidrocyclone to a ...

    By Allgaier Mogensen, S.A.U based in Madrid, SPAIN. from Sand Washing Plants Product line

  • PolyEurope - Scraper Cup Pigs (Steel Body)

    PolyEurope’s standard Cup Pigs are designed for removal of pipeline debris, liquid evacuation, product separation, batching,  displacement, cleaning, and gauging operations. The cup design is derived from the hydraulic piston seal and aggressively scrapes the pipeline bore while maintaining a constant seal. The range is available from ...

    By PolyEurope B.V. based in Geldermalsen, NETHERLANDS.

  • PolyEurope - Conical Cup Pipeline Pigs (Steel Body)

    PolyEurope’s Conical Pigs are designed for removal of debris, liquid evacuation, product separation, batching, displacement cleaning, and gauging operations over long pigging runs and multi diameter lines ( reduction upto 20% ). PolyEurope’s Conical Pigs are especially effective when encountering pipe ovality and varying pipe wall ...

    By PolyEurope B.V. based in Geldermalsen, NETHERLANDS.

  • Vibration Skeleton Bucket

    Our Skeleton Buckets are a versatile and portable method of separating materials. Designed to be tough and increase productivity. Solid steel round tubular tines provide better sifting and material handling, making for a more efficient sorting process. The Rounded top tube greatly enhances strength. Reinforced corners between the side cutter and ...

    By SEC Equipment Corporation based in Colton, CALIFORNIA (USA). from Buckets - Excavator Product line

  • Forsbergs - Model G-Series - Pressure Destoner

    Pressure Destoner Features: The basic principle of the destoner is to effectively separate heavier-than product debris, such as glass, stones and metal from a large amount of light product. Forsberg Destoners are constructed of heavy gauge steel and driven by a unique eccentric drive which is counterbalanced for years of trouble-free operation. ...

    By Forsbergs, Inc. based in Thief River Falls, MINNESOTA (USA). from Destoners Product line

  • Skeleton Bucket

    The Rounded top tube greatly enhances strength. Reinforced corners between the side cutter and top tube, as well as between the top tube and the ears are there to give additional support to maintain the shape of the bucket extending the life span of the bucket. Our Skeleton Buckets are a versatile and portable method of separating materials. ...

    By SEC Equipment Corporation based in Colton, CALIFORNIA (USA). from Buckets - Excavator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you