Denitrification Equipment
-
Manufactured by Leopold - a Xylem Brandbased in USA
Leopold elimi-NITE 2.0 denitrification system is an effective method of reducing nitrate nitrogen in the effluent stream of a wastewater treatment plant by converting nitrate nitrogen to nitrogen gas. The biological conversion is done in an attached growth, downflow, deep bed, mono-media filter. Dissolved oxygen is removed to create an ...
-
Manufactured by AZU Water Gmbhbased in GERMANY
Biological nitrification is the second of two processes involved in the biological removal of nitrogen, in which nitrate is converted into nitrogen gas (stripping). It follows the nitrification process, where ammonium is converted into nitrate by autotrophic bacteria. The activated sludge process, can be extended with the nitrification process. The process is based on nitrogen cycle: it ...
-
Manufactured by Hiden Analytical Ltd.based in UNITED KINGDOM
Flow through probe, low flow design for denitrification studies. Allows for water vapour removal using liquid nitrogen cold ...
-
Manufactured by SUKAHAN (Weifang) Bio-technology Co., Ltdbased in CHINA
nitrogen wastewater, and assist other microorganisms to adapt to the waste water environment. d. Recover quickly from the mess conditions of denitrification led by impact load and sudden factors. e. Greatly improve the treatment result for poor systems in ammonia nitrogen removal. f. Improve the handling ability to nitration system in winter. ...
-
Manufactured by GEA Bischoff GmbHbased in GERMANY
For the denitrification of waste gases from glass furnaces or fluid catalytic crackers (FCC) plants GEA Bischoff offers the SCR DeNOx process. Selective catalytic reduction (SCR) is considered the most efficient commercially proven method of removing nitrogen oxides (NOx) from off-gases. ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
Aqualogic Lago facilitates targeted nitrification/denitrification in pond treatment plants, combined with high carbon and phosphate elimination efficiency by reconstruction of an existing pond into an SBR-pond to enrich the activated sludge, required for the biological cleaning ...
-
Manufactured by Nexombased in CANADA
Fully denitrify your wastewater: If you have nitrate or total nitrogen limits (or anticipate future limits and want to be ready), you need a system that can efficiently remove nitrates. Save space, time and money: Within the tight budgets imposed upon municipalities, implement an effective solution that doesn’t break the capital expenditures bank or multiply operating expenditures down the ...
-
Manufactured by Shanxi Gobon Activated Carbon Co., Ltd.based in CHINA
Activated coke is an excellent adsorbent, which can adsorb the S02 and S03 from industrial boilers' flue gas emissions at the window temperature (120 °C - 180 °C) without heating the flue gas; Meanwhile, activated coke is also a excellent catalyst, it can restore the NOx into N2 and H20 with the conditions of adding the reductant NH3. so the performance of activated coke is the core of ...
-
Manufactured by Thermal Process Systems, Inc.based in USA
The importance of producing a high-quality cake and reducing recycle constituents cannot be overstated. With the advent of our Storage Nitrification Denitrification Reactor (SNDR), thermophilic sludges can be dewatered more economically, producing a high-quality end ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
With Denite, the denitrification process and the filtration process are combined in a single system and provide superior process synergy. NO3-N is converted to nitrogen gas and captured within the media bed along with suspended solids and biomass formed from the denitrification reaction. The Denite gravity filter system operates in a downflow ...
-
Manufactured by Proventus Biosciencebased in CANADA
Proventus offers a unique wastewater nitrification technology for a variety of wastewater types. The bacteria in Proventus wastewater nitrification technology thrive in a wide range of wastewater types and respond quickly during upset conditions to restore wastewater ...
-
based in CHINA
conditions of the boiler flue gas denitrification, for NOx concentration range 0-2000ppm conditions, the overall denitrification efficiency can reach more than 90%, NH3 escape ≤ 3ppm, SO2 / SO3 conversion rate ≤ 1%. Storage environment humidity ≤ 30%, storage location should have a defense against rain, snow, wind, sand, ash ...
-
based in CHINA
Product Name: Glass kiln honeycomb denitrification catalystProduct Type: 13 holes, 16 holes, 18 holes, 20 holes, 22 holes, 25 holesProduct Description: The main components of this product are TiO2, V2O5 and WO3, the shape of honeycomb, section 150 * 150mm, the length can be adjusted, axial / radial compressive strength ≥ 2.5 / 0.8Mpa, ...
-
based in CHINA
Product Name: vanadium and titanium honeycomb denitrification catalystProduct Type: 13 holes, 16 holes, 18 holes, 20 holes, 22 holes, 25 holesProduct Description: This product is mainly composed of TiO2 and V2O5, the shape of honeycomb, section 150 * 150mm, the length can be adjusted, axial / radial compressive strength ≥ 2.5 / 0.8Mpa, ...
-
based in CHINA
conditions of the boiler flue gas denitrification for denitrification after dust, for NOx concentration range 0-1500ppm conditions, the overall denitrification efficiency can reach more than 90%, NH3 escape ≤ 3ppm, SO2 / SO3 conversion ≤ 1%. Storage environment humidity ≤ 30%, storage location should have a defense against rain, snow, ...
-
Manufactured by EcoSense International Inc.based in USA
Nutrients, primarily nitrogen and phosphorus, are essential for the growth of all living organisms. Unfortunately, their excess in surface waters (lakes, streams, rivers) and ground waters has an adverse effect on both environmental and human health. Agricultural and stormwater runoff, airborne deposits, and constant urban development all contribute to high nitrogen loads. In surface waters, high ...
-
based in CHINA
Product Name: Rare Earth - based Honeycomb Denitrification CatalystProduct Type: 13 holes, 16 holes, 18 holes, 20 holes, 22 holes, 25 holesProduct Description: This product is the main component of CeO2 and La2O3, the shape of honeycomb, section 150 * 150mm, the length can be adjusted, axial / radial compressive strength ≥ 2.5 / 0.8Mpa, ...
-
Manufactured by System S&P GmbHbased in GERMANY
. The biofilm which forms on the biodiscs efficiently purifies the wastewater. By continuously rotating on their own axis, they ensure an excellent biological purification of the wastewater. This results in effective C-reduction and nitrification, whereby ammonium is converted into nitrate. The RBC can also perform upstream denitrification, i.e. the ...
-
Manufactured by Hebei Huaqiang Technology & Development Co., Ltd.based in CHINA
There are three mechanisms of NOx production; first thermal type; second fuel type and third quick type. The density of the discharged NOx is closely related to the boiler type, combustion conditions and the proportion of nitrogen in the fuel. Control measures can be divided into first and second degree. First degree measures refers to the measures taken during combustion and achieved in the ...
-
based in GERMANY
is the case e.g. in the cleaning and manufacturing processes in the food industry. The BIOFIT.N process achieves this exceptionally high rate of nitrogen removal through its procedural structure. Constructional separation of the nitrification and denitrification process steps increases the efficiency, so that highest removal rates of over 90% can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you