Dewatering equipment in Texas

  • Griffin Dewatering - Wellpoint Pipe Puller

    The Wellpoint Pipe Puller is a “safety breakthrough” as well as an ideal time saving part in the dewatering set up over the conventional methods. The Wellpoint Pipe Puller grabs the inside of the pipe wall below the threaded section of pipe or the joint of PVC pipe, making the removal of the installed wellpoint a quick, simple, and ...

    By Griffin Dewatering based in Houston, TEXAS (USA). from Dewatering Product line

  • Power Pak - Filter Press

    The Flo Trend Systems Power Pak Filter presses are fabricated from the highest quality carbon steel. The entire frame is sandblasted, primed and coated with epoxy paint. Inlet and outlet manifolds are constructed in either stainless steel or sch. 80 PVC.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Sludge Mate - Container Filter

    The 'Sludge Mate' Container Filter is a simple one step process for dewatering a variety of sludges. The Sludge Mate Container Filter has no moving parts, requires minimal labor, has extremely low maintenance, and is very economical to use.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Deep Well System

    The deep well system is also a versatile predrainage dewatering system which can pump high and low volumes of groundwater. This method is best suited to homogeneous aquifers that extend well below the bottom of the excavation. Deep well systems consist of one or more individual wells, each of which has its own submersible pump at the bottom of the ...

    By Griffin Dewatering based in Houston, TEXAS (USA). from Dewatering Product line

  • Lugger Container Filter

    The Lugger Style Container Filter is an economical, one-step method in separating and dewatering sludges and slurries. The material can be pumped or conveyed into the container filter for liquid /solid separation.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Retrofit Vertical Panel Filters

    Permanently mounted or removable Vertical Panel Filters make a Retrofit for all conventional size roll-off containers. These units have also been used in dump truck beds and sumps.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Front, Side & Rear Loader Container Filters

    Patent Numbers 4,871,454 & 5,595,654. The purpose for separation may be to: Meet federal and state regulations for land fill disposal. Recover the material as a product. Clarify the aqueous phase. Dewater Sludge

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Eductor System

    Especially suited for deep excavations and stratified soils. As many as 100 eductor wells are commonly activated by a single pumping station although this varies considerably on the volumes of water to be pumped and the lift required. The volumes of water which can be pumped by each system are generally low, typically less than 200 gpm.

    By Griffin Dewatering based in Houston, TEXAS (USA). from Dewatering Product line

  • Sewer Bypass Pumping

    As our sewer infrastructure continues to age, rehabilitation is needed to keep it up and running. With Griffin's line of trash handling pumps, contractors can bypass sewage during sewer line repairs - getting tough projects done and keeping the system working for the community that relies on it.

    By Griffin Dewatering based in Houston, TEXAS (USA). from Dewatering Product line

  • Roll-Off Container Filter

    The Roll-Off Style Container Filter is a patented, economical, one-step method for separating and dewatering sludges, slurries and waste streams. The material can be pumped or conveyed by other means into the roll-off container filter for liquid / solid separation. Liquid drains through the installed filter media panels and out of the container ...

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • FLO-VAC - Pump

    Used in conjunction with a strainer, the Flo-Vac pump can vacuum transfer a variety of liquids/sludges. It is also useful in vacuum dewatering sludge in Flo Trend's line of Container Filters.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Vac Mate Container Filter

    The Retro-Fit 'T' Filter makes a vacuum filtration container out of a standard vacuum box. Retrofit 'T' Filter Vac Mate The Vac Mate retro inserts are available for 20, 25, and 30 cubic yard vacuum containers. Attachable roller-wheel jacks allow the insert to be rolled in and out of the vacuum box by hand or with the aid of a forklift. The 'T' ...

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Self Dumping Hopper Container Filter

    The Self Dumping Hopper Container Filter is an economical, one-step method of separating slurries, sludges, and waste stream. The liquid suspension is conveyed or pumped into the container for separation.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Griffin - Wellpoint System

    The wellpoint system is one of the most versatile of pre-drainage methods which can pump a few gallons per minute in fine sandy silts or many thousands of gallons per minute in coarse sands and gravels.

    By Griffin Dewatering based in Houston, TEXAS (USA). from Dewatering Product line

  • Poly-Mate - Polymer Mixing and Injection System

    Poly-Mate Polymer Injection Systems can be used for either liquid or dry polymer mixing and injection.

    By Flo Trend� Systems, Inc. based in Houston, TEXAS (USA). from Dewatering Product line

  • Dewatering

    This diagram shows a typical dewatering system for lakeside construction. Using this system, a large volume of dirty, silty water can be pumped from inside a coffer dam and through the filtration process efficiently. The construction can then be completed inside the coffer dam while the clean effluent water is safely returned to the lake.

    By BakerCorp Office in Borger, TEXAS (USA). from Applications our products can be used in Product line

  • SludgeKing - Containers

    The SludgeKing is a specially designed container in the AquaCat family of dewatering boxes. The SludgeKing uses filters that radius to the bottom of the container leaving no corners for cake to stick. The two center panels of the SludgeKing increase the filtration area by 33% over dewatering containers with only one filter wall.

    By ParkProcess, a subsidiary of ParkUSA based in Houston, TEXAS (USA). from Dewatering - Dewatering Boxes Product line

  • Xtractor - Dewatering/Wet Waste Processing System

    The Xtractor is much more than a simple can crusher. It is a specialized piece of equipment based on our Patented High Density Extruder that is specifically designed for removing liquids from aluminum cans, plastic bottles and other liquid containers. It makes no difference if the package is aseptic, plastic or aluminum the XTRACTOR can do the ...

    By Brask Enterprises, Inc. based in Houston, TEXAS (USA). from Dewatering Equipment Product line

  • Premium

    Brackett Green - Model MacerAcer - Screenings Conditioning and Dewatering System

    The Brackett Green MacerAcer screening package comes in three modular units. The first removes grit and macerates the material into 3/8' pieces. The second unit separates organic from inorganic material, reducing volume by 90%, and the third dewaters the screenings in centrifugal spin cycle. Reduction in volume means fewer trips to the landfill ...

    By Ovivo (Formerly Eimco Water Technologies) Office in Austin, TEXAS (USA). from Municipal Wastewater - Headworks Product line

  • Elgin - Model 1000DT - Dredge Dewatering System

    The Elgin 1000DT Dredge Dewatering System features two double deck Hyper G shakers, with (2) 12’’ 500 gpm desanders and a (10) 5’’ 80 gpm desilters; all on top of a 5,000 gallon (18, 928 liters) tank, split between three compartments. Each compartment includes its own clean-out and includes mud guns to ensure constant ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Dredge Dewatering Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you