Dewatering System Equipment Available In East Timor
-
Manufactured by Titan Saltbased in NETHERLANDS
Once crystals are made to perfection in our crystallizer system, they have to be separated from the mother liquor. Titan Salt has developed the most advanced and operation-friendly dewatering system. Our dewatering system uses one of the best performing pusher centrifuges manufactured by Ferrum. Our extensive ...
-
Manufactured by Industrial Waste Water Services, LLCbased in USA
In all industries that utilize wastewater equipment a growing concern is the cost of dealing with the skimmings that are produced. High fuel cost is really beginning to take effect. Dewatering by IWWSIWWS has been helping industries deal with this problem for years. 30 years ago we were heavily involved in the poultry industry. ...
-
Manufactured by Zhejiang Lifeng Environmental Equipment Co., Ltdbased in CHINA
MDS202 dewatering system:the sludge thickener thickens sludge with concentration of 1% or less to that with a concentration of 4 to 6%. This mechanical thickening will constantly produce stable thickened sludge, which is difficult with gravity thickening. It is possible to install as pre-thickener for your existing belt press or ...
-
Manufactured by Hydro Turbased in TURKEY
It is a physical process in which the water content of the waste sludge that occurs after water treatment is reduced. Sludge with reduced water content can be easily processed and disposal costs significantly reduced. ...
-
Manufactured by Trucentbased in USA
Sludge dewatering systems can be custom engineered and integrated into your process to remove solid waste, extracting the water from sludge. Choosing the correct sludge dewatering system that is right for you and your process is vital for maximum efficiency and to not add operating ...
-
Manufactured by Shanghai Centrifuge Institute Co., Ltd (SCI)based in CHINA
The key equipment for sludge thickening and dewatering is the main unit of sludge dewatering, namely the horizontal decanter centrifuge (the decanter centrifuge for short), which is the equipment for suspension separation by the use of centrifugal sedimentation ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Hydroflux Industrial not only supply dewatering equipment such as Belt Presses, Screw Presses, Filter Presses and Centrifuges but we have the skills and experience to design and construct an entire dewatering plant. In order to effectively manage and dewater sludge generated form industrial wastewater processes, a number of steps are ...
-
Manufactured by Ekofinn Energie- & Wassertechnik GmbHbased in GERMANY
The DRAIMAD / TEKNOBAG bags dewatering system was developed for municipal and industrial waste water plants less than 3.000 people equivalent (p.e.). Waste water plants of this size normally only have the option to dispose of waste at very high cost. This economical technology can dewater up to about 160 kg dry solids of municipal sludge per ...
-
Manufactured by Teknofanghi S.r.l.based in ITALY
For sludge dewatering produced by small WWTP, TEKNOFANGHI proposes TEKNOBAG-DRAIMAD®. This system dewaters in bags and stores the sludge of every nature. The heart of the system is the original filtration bag, made from a special water repellen material. This solution permits to reach 15-30% dry solids content after a few hours ...
-
Manufactured by Alumichem A/Sbased in DENMARK
Alumichem builds plug & play systems for dewatering of sludge, using decanter centrifuges. The systems are skid-mounted to facilitate easy installation. The thickened sludge is dewatered in a decanter centrifuge, where the dry matter content can reach 30%. This process is performed by centrifuging the sludge to reach a ...
-
Manufactured by Picatech Huber AGbased in SWITZERLAND
HUBER is able to offer all common methods of sludge dewatering: screw presses, belt filter presses, and centrifuges. ...
-
Manufactured by Enviropol Engineers Pvt.Ltd.based in INDIA
Slurry from wet scrubber is processed for solid-liquid separation for 100% re-circulation of liquid back to the scrubbing system & eco-friendly disposal of ash. Various models are available ranging from conventional sludge drying beds arrangement to completely mechanized systems for direct loading of ash in trolleys. The selection ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity for dredge dewatering operations. On-board linear motion shakers have the largest screening surface area on the market. In addition, systems have complete desilter and desander hydrocyclone manifolds incorporated into packaged ...
-
Manufactured by aquen aqua-engineering GmbHbased in GERMANY
sedimentation vessels installed in sequence, with some systems using up to six vessels in a row. The space required on site measures approximately 100 m². Other requirements: Gradients or access for pumps and tankers. The water run-off is disposed of into the sewage system or local environment, where applicable. The remaining sediment in the ...
-
Manufactured by Shanghai Haibar Mechanical Engineering Co., Ltd.based in CHINA
Our integrated sludge dewatering system consists of the sludge pump, sludge dehydrator, air compressor, cleaning pump, control cabinet, as well as the flocculants preparation and dosing system. A positive displacement pump is recommended as a sludge pump or flocculants dosing pump. In line with the requirements of our customers, we can ...
-
Manufactured by Benenv - Jiangsu Benenv Environmental Protection Co., Ltdbased in CHINA
The mobile sludge dewatering system is a new sludge treatment product designed for some special occasions such as complex environment, unstable sludge volume and temporary conditions for the existing equipment in the sludge treatment market. This product is aimed at the existing dewatering equipment on the market with high energy consumption, ...
-
Manufactured by Yixing Holly Technology Co.,Ltd.based in CHINA
Mobile filter press with chemical dosing unit and Screw Press for sludge dewatering machine is composed of screw sludge dehydrator ,dosing device ,dosing pump ,sludge pump and electric control cabinet ,sludge is pumped into screw sludge dewatering machine mixing tank .Dosing device adopts manual operation ,chemical through metering ...
-
Manufactured by PHOENIX Process Equipment Co.based in USA
PHOENIX portable belt press dewatering systems provide: Maximum Dependability - PHOENIX matches system components to your throughput requirements. You get a turnkey system built specifically for your operation, either skid or trailer mounted, ready to perform. Dependable Performance - rugged PHOENIX belt filter presses are field ...
-
Manufactured by Dewlink Sludge Treatment Ltdbased in UNITED KINGDOM
The latest innovation on the many variation of screw press dewatering system, with an increase in ...
-
Manufactured by RJ Dewaterintel Environment Co.,Ltd.based in CHINA
Integrated sewage sludge dewatering is a new sludge treatment product designed for some special occasions, such as complicated environment, unstable sludge volume, temporary, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you